About the Sanus Classic MST16b
A tilt mount for small TVs and monitors
A tilt mount for small TVs and monitors
The Sanus Classic MST16b mount features fingertip control so you can easily adjust the tilt without tools. You can tilt the mount up or down up to 12º. The mount can support TVs with screen sizes from 13"-32" and weighing up to 35 lbs. The mount can be shifted slightly left or right on the wall plate so the TV is centered, even if your wall studs are off-center.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for TVs and monitors 13"-32"
- supports up to 35 lbs.
- vertical tilt range: ±12°; (may vary with size of TV)
- easy one finger tilt adjustment
- stud-mounting required
- mounting hardware included
- 9-1/8"W x 8-15/16"H x 1-3/4"D
- warranty: 5 years
- MFR # MST16b-B1
What's in the box:
Sanus Classic MST16b owner's manual
- Wall plate
- TV bracket
- 2 Extension brackets
- Four M4 x 12mm bolts
- Four M4 x 35mm bolts
- Four M5 x 12mm bolts
- Four M5 x 35mm bolts
- Four M6 x 12mm bolts
- Four M6 x 35mm bolts
- Four M8 x 12mm bolts
- Eight M4/M5 washers
- Eight M6 washers
- Two 1/4" x 2-1/2" lag bolts
- Four M6 x 12mm extension bolts
- Four M6 hex-nuts
- 4 Spacers
- Instruction Manual
Customer reviews for Sanus Classic MST16b
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus Classic MST16b
Features & specs
Features | ||
---|---|---|
Mount Type | Tilt | |
Motion | ||
Tilt | No | |
Swivel | No | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | No | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | No | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Features
TV Capacity: The Sanus Classic Series MST16b wall-mount bracket is designed to support flat-panel TVs from 13" to 32", weighing up to 35 lbs.
VESA Bolt Pattern: The Sanus MST16b wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 75mm-200mm and a vertical hole spacing of 75mm-200mm. The MST16b comes with M4, M5, and M6 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 75mm x 75mm
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm (included extension brackets must be used)
Low-Profile: Its low-profile design positions the TV just 1.75" from the wall for a clean appearance.
Tilting Design: The Sanus Classic Series MST16b tilting mount gives you the best view of your wall-mounted television from the floor or couch. Innovative technology provides up to 12º of tilt with the touch of a finger, making it easy to reduce glare and improve viewing angles without tools. Tilting the TV also provides easier access to cable connections on back of the television.
Construction: The MST16b bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Wall Plate: The wall plate must be mounted to a single wall stud using the supplied lag bolts.
Installation Tools: The following tools are recommended for mounting the MST16b:
- Tape measure
- Stud finder
- Level
- Drill
- 1/8" Drill bit (for wood stud)
- 7/16" Socket wrench
- 3/8" Box wrench
- Screw driver
- Hammer
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Excellent TV mount for a 32 inch TV. Tilt option for a very reasonable cost.
Art from Dover, MA