About the Sanus NF30 Speaker Stands
High-performance speakers deserve high-performance stands. From top to bottom, Sanus' latest wood speaker stands combine fine furniture looks with ultra-rigid construction for solid support and optimum sound quality.
Each base and top plate is made of anti-resonant MDF and has a smooth low-luster black finish. Brass speaker studs and neoprene pads are included to isolate the speaker from the top plate. Plastic feet for the underside of the base plate protect wood or tile floors (adjustable carpet spikes also included). A patent-pending concealed speaker wire path on the rounded support pillar keeps cables out of sight. Assembly takes just minutes.
Priced per pair
Product highlights:
- black lacquer finish
- stand height: 30"
- top plate measures 6" x 6"
- base plate measures 10-1/2" x 11-3/4"
- supports 25 lbs.
- floor spikes to help minimize vibrations
- warranty: 5 years
- MFR # NF30B
What's in the box:
Sanus NF30 Speaker Stands owner's manual
- 2 Black base plates
- 2 Black top plates
- 2 Black pillars
- Four 2.25" Base screws
- 4 1.25" Top plate screws
- 8 Nuts
- 8 Spiked feet
- Two 12" Plastic wire covers
- Two 13.5" Plastic wire covers
- 8 Brass speaker studs
- 8 Self-adhesive neoprene speaker pads
- 8 Plastic isolation feet (to cover spiked feet)
- 8 Pan-head screws
- Instruction Manual
Customer reviews for Sanus NF30 Speaker Stands
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus NF30 Speaker Stands
Features & specs
Number of Stands Included | 2 | |
Stand Type | N/A | |
Compatibility | Universal | |
Height | 30 | |
Weight Capacity | 25 | |
Base Dimensions | 10.475 x 11.735 | |
Top Plate Dimensions | 6 x 6 | |
Materials | MDF | |
Adjustable | No | |
Wire Management | Yes | |
Fillable | No |
Product Research
Features
Design: Each base is made of anti-resonant MDF finished with three coats of hand-sanded black lacquer. Adjustable floor spikes are included to provide stable footing on carpeted floors, and to further minimize resonance. A single sturdy black pillar supports the low-profile top plate, which features a choice of neoprene isolation pads or brass isolation studs. Plastic wire covers give your speaker stands a neater look by concealing the wires completely.
Spiked Feet: The spiked feet pierce the carpeting and anchor the stand to the floor, keeping the speaker stable and reducing resonance. With the spiked feet installed, the stand height is adjustable from 29" to 29.25". Note: If you do not wish to use the spiked feet, Sanus has included plastic isolation feet that will not scratch your floor.
Brass Studs: These upward facing brass studs hold the speaker stable and minimize resonance. They add approximately 0.20" to the overall height of the stand.
Neoprene Pads: The sharp points on the brass studs can scratch the bottom of the speaker. If this is of concern, you can use the supplied neoprene pads to stabilize the speaker.
Weight Capacity: Each speaker stand can support up to 25 lbs.
Top Plate Dimension: The top plate that the speaker sits on is 6" wide and 6" deep.
The Sanus NF30 Speaker Stands replaces these items
Sanus EF28B Speaker Stands
- 28" tall
- carpet spikes and screw-in rubber pads included
Sanus EF24B Speaker Stands
- 24" tall
- carpet spikes and screw-in rubber pads included
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
I would rate the Sanus NF30s a 5-star. The product is heavy and well made. It comes with plenty of choices for floor stands and speaker standoffs. I put a fairly heavy pair of Pioneer speakers on my stands and used Monster Cables to connect them and it all went together fine and performs very well.
Mickman from High Point, NC