Design: Each base is made of
anti-resonant MDF finished with three coats of hand-sanded black lacquer.
Adjustable floor spikes are included to provide stable footing on carpeted
floors, and to further minimize resonance. A single sturdy black wood pillar supports
the low-profile top plate, which features a choice of neoprene isolation pads or
brass isolation studs. Plastic wire covers give your speaker stands a neater
look by concealing the wires completely.
Spiked Feet: The spiked feet
pierce the carpeting and anchor the stand to the floor, keeping the speaker
stable and reducing resonance. With the spiked feet installed, the stand height
is adjustable from 35.5" to 35.75". Note: If you do not wish to
use the spiked feet, Sanus has included plastic isolation feet that will not scratch your
Brass Studs: These upward
facing brass studs hold the speaker stable and minimize resonance. They add
approximately 0.20" to the overall height of the stand.
Neoprene Pads: The sharp points
on the brass studs can scratch the bottom of the speaker. If this is of concern,
you can use the supplied neoprene pads to stabilize the speaker.
Weight Capacity: Each speaker
stand can support up to 25 lbs.
Top Plate Dimension: The top
plate that the speaker sits on is 6" wide and 6" deep.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.