Skip Navigation

The Sanus SF203 is designed for flat-panel TVs up to 27" and holds your set just 3" from the wall. This compact mount lets you swivel your TV to the right or left, or tilt it up or down so your TV is positioned for optimal viewing. And the mount's "roll" adjustment lets you fine-tune your TV's placement after it's mounted to make the screen perfectly level.

Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.

Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.

Product Highlights:

  • designed for flat-panel LCD TVs up to 27"
  • accommodates VESA 75, 100, and 200 x 100 mounting hole patterns
  • supports up to 50 lbs.
  • mounting hardware included
  • tilt range: +15° up to -15° down
  • swivel range: 30° left to 30° right
  • roll control: +1° to -1°
  • stud-mounting required
  • 4-3/4"W x 6-3/4"H x 2-7/8""D
  • warranty: 10 years
  • Our 60-day money-back guarantee

Sanus VisionMount® SF203 Reviews

Average Customer Review:

3 Reviews

Fits Sony TVs with extension bars from Sanus

Written by: Jim from Maryland on July 26, 2010

Crutchfield Customer Review (What's this?)

The mount finder said this would fit my Sony TV, but I had to call Sanus to have the extension bars sent to me. They are not included in the box but they will send them without charge. The bars arrived without any mounting hardware, so I had to go to the hardware store to get 4 bolts & nuts. I was then able to mount the TV without further problem.



Good quality but do your homework

Written by: John from La Crosse, WI on January 18, 2010

Crutchfield Customer Review (What's this?)

Great product but does not fit some TV's (like Sony). An adaptor plate is needed but Crutchfield may not have these available. The fact that this wall mount will not fit some TV brands (like Sony) was not clear when ordering. After Tech Support offered no remedy I crafted my own mounting transition piece. This 30 minute install project lasted two days!



Great for small tv's

Written by: Holly from Phoenix, AZ on July 14, 2009

Crutchfield Customer Review (What's this?)

I think this mount is great. It does just what we need. It was easy to install and and tilts just enough so the kids can see the screen from the floor.



Hands-on research

What's in the box?

Download owner's manual

  • Wall plate
  • Monitor mounting head
  • 2 Hex-head lag bolts (length=2.75")
  • 2 Plastic wall anchors (length=2.5")
  • 4 Bolt head covers
  • 4mm Allen wrench
  • Pivot shaft (5/8" diameter x 2.5" length)
  • Pan-head pivot bolt (1/4-20 x 3.25") with 2 metal 1/2" flat washers and 1 plastic 1/2" flat washer
  • Large diameter plastic washer (black)
  • 1/4-20" Nylock nut
  • 4 M4 x 12mm bolts
  • 4 M4 x 30mm bolts
  • 4 Plastic spacers (Length=11/16")
  • Instruction Manual

Product Research


Overview: The Sanus Systems VisionMount SF203 is a full-motion wall mount for small flat panel TVs and monitors. The SF203 can accommodate TVs and monitors with screen sizes up to 27" and weighing up to 50 pounds.

Virtual Axis: Sanus' Virtual Axis technology allows the mount to tilt up and down with the touch of a finger, while its low-profile design places the TV just 3" from the wall. The mount's "full motion" allows the mount to tilt (+/-15°) and swivel (+/-30°) for easy viewing from multiple angles. The adjustment knob enables the TV to move easily while maintaining tension.

Level Adjustment: Post-installation adjustment ensures the TV is perfectly aligned, even after hanging the TV. You can adjust the lateral roll adjustment approximately 1° in either direction.

Wall Mounting: The wall plate should be mounted to a wood wall stud, solid concrete, or concrete block using the supplied wall-mount lag screws. Required tools: Drill with 7/32" bit (5.5mm), stud finder, box wrench (13mm or 1/2") or adjustable wrench, Phillips-head screwdriver.

VESA: This TV wall-mount uses three VESA mounting hole patterns in accordance with industry standards set by the Video Electronics Standards Association:

VESA Pattern Horizontal Vertical
75 (square) 75mm (2.95") 75mm (2.95")
100 (square) 100mm (3.94") 100mm (3.94")
200 x 100 (rectangular) 200mm (7.87") 100mm (3.94")


  • Wall Plate: W=2.327", H=6.747", D=1.678"
  • Monitor Mount: W=9.084", H=5.679", D=2.13"
  • TV Mounting Distance From Wall: 2.86" (TV mounted parallel to wall)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Product reviews from the Crutchfield Labs

Great for small TVs -- and monitors

Written by Ralph Graves, Staff Writer - Creative, on 7/2/2012 9:54:00 AM

The SF203 is a small, simple mount that's ideal for a small LCD TV. But it's good for something else, too. Mounting a computer monitor. A colleague recently redid his office so he could work standing instead of sitting (it's something of a trend these days). His computer keyboard was set on a shelving unit to raise it to the proper height, but what do to do about the monitor? It's mounted to a SF203 on the wall, and the tilt and swivel functions let him set it for optimal visibility.

What are the Labs?