Overview: The Sanus VisionMount SF208 is a full-motion wall mount for
small flat-panel TVs and monitors. The SF208 features Virtual Axis technology
that allows the mount to tilt up and down with the touch of a finger. Plus its
"full motion" design allows the mount to extend, retract and swivel up to 8-inches
from the wall for easy viewing from multiple angles. An adjustment knob enables
you TV to move easily while maintaining tension, and an in-arm cable management
easily conceals and routes your TV's cables. The SF208 also offers
post-installation level adjustment to ensure your TV is perfectly aligned, even
after hanging. The SF208 fits VESA 200 x 100, 100 x 100, and 75 x 75 to accommodate
virtually any flat-panel TV or monitor up to 27 inches and 45 lbs.
VESA Compatible: This TV wall-mount uses VESA 75 (75 mm x 75mm), VESA 100 (100mm x 100mm),
and VESA 200 x 100 (200mm x 100mm) mounting hole patterns in accordance with
industry standards set by the Video Electronics Standards Association. Only TVs
that comply with VESA 75, 100, or 200 x 100 standards can be wall-mounted using this bracket.
Virtual Axis: Sanus' Virtual Axis technology allows the mount to tilt up and down with the
touch of a finger, while its low-profile design places the TV just 3" from the
wall when retracted. The mount's "full motion" allows the mount to tilt
(+/-15°), swivel (+/-90°), Pan (+/-90°), and extend 8" from the wall for easy
viewing from multiple angles. The adjustment knob enables the TV to move easily
while maintaining tension.
Level Adjustment: Post-installation adjustment ensures the TV is
perfectly aligned, even after hanging the TV. You can adjust the lateral roll
adjustment approximately 1° in either direction.
Built-In Cable Management: The SF208's built-in cable management
system protects and conceals your television's cables.
Wall Mounting: The wall plate should be mounted to a wood
wall stud, solid concrete, or concrete block using the supplied wall-mount lag
screws. Required tools: Drill with 3/16" bit, stud finder, box wrench or
adjustable wrench, Phillips-head screwdriver.
- Wall Plate: W = 2.375", H = 6.8125", D = 1.6875"
- Monitor Mount: W = 9.0625", H = 5.6875", D = 2.3125"
- TV Mounting Distance From Wall: 3" to 8" (TV mounted
parallel to wall)
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.