Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The Sanus VisionMount SF213 is a full-motion wall mount for small
flat-panel TVs and monitors. The SF213 features Virtual Axis technology that
allows the mount to tilt up and down with the touch of a finger. Plus its "full
motion" design allows the mount to extend, retract and swivel up to 13 inches
from the wall for easy viewing from multiple angles. An adjustment knob enables
you TV to move easily while maintaining tension, and an in-arm cable management
easily conceals and routes your TV's cables. The SF213 also offers
post-installation level adjustment to ensure your TV is perfectly aligned, even
after hanging. The SF213 fits VESA 200 x 100, 100 x 100, and 75 x 75 to
accommodate virtually any flat-panel TV or monitor up to 27 inches and 45 lbs.
VESA Compatible: This TV wall-mount uses VESA 75 (75 mm x
75mm), VESA 100 (100mm x 100mm), and VESA 200 x 100 (200mm x 100mm) mounting
hole patterns in accordance with industry standards set by the Video Electronics
Standards Association. Only TVs that comply with VESA 75, 100, or 200 x 100
standards can be wall-mounted using this bracket.
Virtual Axis: Sanus' Virtual Axis technology allows the mount to tilt up and down with the
touch of a finger, while its low-profile design places the TV just 3" from the
wall when retracted. The mount's "full motion" allows the mount to tilt
(+/-15°), swivel (+/-90°), Pan (+/-90°), and extend 13" from the wall for easy
viewing from multiple angles. The adjustment knob enables the TV to move easily
while maintaining tension.
Level Adjustment: Post-installation adjustment ensures the TV is
perfectly aligned, even after hanging the TV. You can adjust the lateral roll
adjustment approximately 1° in either direction.
Built-In Cable Management: The SF213's built-in cable management
system protects and conceals your television's cables.
Wall Mounting: The wall plate should be mounted to a wood
wall stud, solid concrete, or concrete block using the supplied wall-mount lag
screws. Required tools: Drill with 3/16" bit, stud finder, box wrench or
adjustable wrench, Phillips-head screwdriver.
- Wall Plate: W = 2.375", H = 6.8125", D = 1.6875"
- Monitor Mount: W = 9.0625", H = 5.6875", D = 2.3125"
- TV Mounting Distance From Wall: 3" to 13" (TV mounted
parallel to wall)