Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The Sanus VisionMount VLF320 is a super-slim,
full-motion wall-mount for large flat-panel TVs and monitors. This full-motion
mount allows you to easily aim the TV for viewing virtually anywhere in the
room. The mount can tilt, swivel, and extend in every direction so you can
attain the perfect viewing angle. This mounting bracket, black in color,
features a built-in cable management system to conceal and protect your cables.
The mount is ultra slim, placing your TV only 1.25" from the wall, but can
extend up to 20.8125".
Construction: The wall-mount bracket is made from solid
heavy-gauge steel, with a durable powder coated black finish. It comes with a
decorative cover to hide assembly and mounting hardware for a finished
Capacity: The VisionMount VLF320 is designed for 37" to 70"
flat-panel TVs. It has a maximum weight capacity of up to 120 lbs.
Bolt Pattern and VESA: The vertical brackets that attach to
the TV can accommodate vertical hole spacing (on the back of the TV) between
25mm and 420mm. The horizontal brackets can be adjusted to accommodate a
horizontal hole spacing on the back of the TV from 146mm to 730mm. The VLF320
comes with M4, M5, M6, and M8 size bolts to mount the brackets to your TV. For
TVs with curved rear panels, an assortment of spacers is included for proper
mounting. Given the range of motion, the mount will accommodate the following
VESA (Video Electronics Standards Association) mounting hole patterns:
- 200mm x 100mm, 200mm x 200mm
- 300mm x 200mm, 300mm x 300mm
- 400mm x 200mm, 400mm x 300mm, 400mm x 400mm
- 500mm x 400mm
- 600mm x 400mm
Note: Additional hardware may be required for your specific
model of TV. For example; shorter or longer screws, thicker or slimmer washers
or spacers. These additional accessories can often be found at your local
Full-Motion w/ Fingertip Tilting Technology: You can
laterally shift the TV along the wall plate for ideal placement. Fingertip
tilting technology provides smooth tilting with the touch of a finger from 0° to
-10°. The VLF320 can sit as close as 1.25" from the wall or extend out from the
wall up to 20.8125". You can also swivel the wall-mount up to +/- 33°. When you
have positioned the TV where you want it, you can lock the mount into place to
prevent further movement.
Post-Installation Level Adjustment: Post-installation level
adjustment allows the TV to "roll" up to 1.5º clockwise and counterclockwise to
ensure it is perfectly level, and lateral shift ability makes it easy to center
the TV on the wall, even with off-center studs.
Cable Management: With its integrated cable management
system, the VLF320 keeps loose cables organized and concealed within the
extension arm for a clean appearance without compromising TV motion. A
decorative cover also conceals assembly and mounting hardware.
Wall Mounting: The wall plate must be mounted to a wood wall
stud (16" to 24" on center) or a solid concrete or concrete block wall. It is
not designed for use in metal stud walls. The wall must be capable of supporting
five times the weight of the TV and mount combined. Tools required for mounting
include: a Phillips-head screwdriver, 1/2" socket wrench, electric drill, 7/32"
drill bit (for wood studs), and 3/8" masonry bit (for concrete or block). To
properly position the mount, you'll likely need a pencil, awl, level, tape
measure, hammer, and stud finder as well.
- Wall Plate: Width = 31.5", Height = 13.1875". Depth =
- TV Bracket Assembly: Width = 32.1875", Height =
19.6875", Depth = 1.25"-20.8125"
- Vertical Brackets: Width = 1.4375", Height = 20.125", Depth =