1.888.955.6000
crutchfield.com
Crutchfield

Sanus Premium Series VLF515

Full-motion wall mount with articulating arm for 51"-70" TVs

Zoom
  • Sanus Premium Series VLF515

    Front

  • Sanus Premium Series VLF515

    Left front view

  • Sanus Premium Series VLF515

    Left front view with arm extended

  • Sanus Premium Series VLF515

    Right side view

  • Sanus Premium Series VLF515

    Side view with arm extended

 

Our take on the Sanus Premium Series VLF515

by Ralph Graves
Sanus

The Sanus Premium Series VLF515 makes it simple to wall-mount and precisely position your flat-panel TV. This full-motion bracket can support TVs with screen sizes from 51" to 70" and weighing up to 125 lbs. The articulated arm extends your TV up to 15" out from the wall. The mount lets you swivel your TV from side to side, and you can also tilt it up or down for optimal viewing.

Sanus Premium Series VL515 full-motion TV mount The mount can hold your TV 15" out from the wall with the arm fully extended.

A smart, safe design for convenient mounting

Sanus' tools-free assembly makes setup simple. Once you've secured the brace to the wall, the arm just slides into position. A safety lock that closes with an audible click lets you know the arm is securely in place.

Read more

Fine-tune your TV's placement

After installation, the mount's "roll" adjustment lets you fine-tune your TV's position to ensure that the screen is perfectly level. The arm assembly can also be shifted slightly left or right on the wall plate so the TV is centered, even if your wall studs are off-center. Finally, the mount's hollow arm lets you thread cables through it, keeping them out of sight and free from tangles.

Will this mount work with my TV?

Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.

Where do I drill the holes?

Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.

Highlights:

  • designed for TVs 51"-70"
  • supports up to 125 lbs.
  • pivoting arm positions TV up to 15" away from wall
  • vertical tilt range: +5° to -15° (may vary with size of TV)
  • roll adjustment: +3° to -3°
  • in-arm wire channel conceals cables without inhibiting movement
  • tools-free mount assembly
  • stud-mounting required
  • 30-7/8"W x 18-5/8"H x 3-5/8"D (up to 15" with arm extended)
  • warranty: 10 years
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Product Research
What's in the box?

Download owner's manual

  • 2 Horizontal TV brackets
  • Vertical TV bracket
  • Wall-plate
  • Arm assembly
  • Four M4 x30mm bolts
  • Four M5 x 30mm bolts
  • Four M6 x 35mm bolts
  • Four M8 x 35mm bolts
  • Four M4/M5 washers
  • Four M6/M8 washers
  • 4 Spacers
  • Four 5/16" x 3-1/2" lag bolts
  • 4 Anchors
  • Stud-finder/level
  • Wall-Mount Template
  • Instruction Manual
  • Online Product Registration
  • Stud Finder/Level note

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Full-Motion Design: The Sanus Premium Series VLF515 full-motion, wall-mount bracket provides a 3-points of movement for an optimal viewing position. The VLF515 extends from the wall (3.625"-15"), tilts up/down (+5°/-15°), and swivels left or right (+/-55°) for easy viewing anywhere in the room.

TV Capacity: The Sanus Premium Series VLF515 wall-mount bracket is designed to support flat-panel TVs from 51" to 70", weighing up to 125 lbs.

VESA Bolt Pattern: The VLF515 full-motion, wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 300mm-700mm and a vertical hole spacing of 200mm-400mm. The Sanus VLF515 comes with M4, M5, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:

  • 300mm x 200mm
  • 300mm x 300mm
  • 400mm x 300mm
  • 400mm x 400mm
  • 500mm x 300mm
  • 500mm x 400mm
  • 600mm x 400mm
  • 700mm x 400mm
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.

Construction: The bracket is constructed of heavy-gauge steel and high-impact plastic with a durable powder-coated black finish.

Perfect Positioning: The TV brackets and arm assembly let your television slide from side-to-side on the wall-mount plate for perfect positioning of the TV on your wall. There are also two level adjustment screws on the TV bracket to raise or lower (+/-3°) the sides of the TV.

Note: The wall plate must be mounted to wall studs or anchored to a brick, block, or concrete wall using the supplied lag bolts (and wall-anchors). The slots in the wall plate can accommodate wall studs 16" and 24" on center.

Safety Tabs: Once the wall plate is anchored to the wall studs, the arm assembly can be hooked into the wall bracket. An integrated safety tab on the TV bracket provides a safe and easy connection to the wall bracket you can hear. The TV brackets are then attached to the back of your television and then mounted to the assembly arm; a safety knob & tab secures it in place.

Cable Management: An in-arm cable management channel protects and conceals cables the length of the arm for a clean appearance, while decorative covers conceal assembly and mounting hardware of the wall-plate for a finished appearance.

Installation Tools: The following tools are recommended for mounting the VLF515:

  • Tape measure
  • Stud finder/level (included)
  • Drill
  • 7/32 Drill bit (for wood stud)
  • 3/8" Drill bit (for masonry)
  • 1/2" Socket wrench
  • Screw driver
  • Hammer
  • Pencil

Dimensions:

  • Horizontal TV Bracket:
    • Width = 29.5625"
    • Height = 2.25"
    • Depth = 1.25"
  • Vertical TV Bracket:
    • Width = 4.5"
    • Height = 19.0625"
    • Depth = 0.9375"
  • Arm Assembly (retracted):
    • Width = 9.75"
    • Height = 15.75"
    • Depth = 2.1875"
  • Wall Plate:
    • Width = 30.875"
    • Height = 12.25"
    • Depth = 1.125"
 
Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Sanus Premium Series VLF515 Reviews

Average Customer Review:

3 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

perfect

Written By medic9067, burlington wa on Tuesday, October 21, 2014
Crutchfield Customer Review (What's this?)
 
easy to put up. great adjustment for perfect viewing
Pros:
quick easy install, good price
Was this review helpful?    Yes | No
 
4 out of 5

Generally well engineered.

Written By JohnP, Los Alamos, NM on Monday, October 20, 2014
Crutchfield Customer Review (What's this?)
 
I really like this product. It is well engineered, especially to make it easy to install. The TV installation was a breeze, the adjustments were excellent, the movement easy. The reason for 4 instead of 5 stars was the spacers. The spacers are required on some TVs and the ones supplied with this unit are polymeric and have too low a modulus for the weight rating. All plastics are subject to creep under load, and creep these did, resulting in a bending moment (torque) placed upon the TV mounts. A few dollars spent at the local hardware store for steel (27 million modulus!!) resulted in a perfect fit with appropriate spacers and washers.
Pros:
Easy installation, well engineered for application. Plenty of adjustments. Designed for easy install and use. Excellent instructions and templates.
Cons:
Polymeric spacers have too low a modulus for the application. Aluminum or steel would have made a perfect unit. You can do this yourself.
Was this review helpful?    Yes | No
 
5 out of 5

Sanus TV Wall Hanger

Written By LarryW, Coos Bay, OR on Tuesday, October 14, 2014
Crutchfield Customer Review (What's this?)
 
I ask Crutchfield to give me a wall hangar to mount my awsome TV I ordered from them and their choice was excellent. This Sanus hanger is the best. They supply you with all the parts you need to mount it including a stud finder. The best universal hanger in my opinion. Thanks Crutchfield !!
Pros:
Everything you need to mount it. They give you bolts and anchors for every senario. Easy to follow step by step instructions.
Cons:
None
Was this review helpful?    Yes | No
 

For a more in-depth review and enhanced detailed information on the Sanus Premium Series VLF515, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_051VLF515/Sanus-Premium-Series-VLF515.html ).