About the Sanus Premium Series VLF525
The Sanus Premium Series VLF525 is a full-motion wall mount so you can precisely position your flat-panel TV. A wall mount cover hides ugly screwheads, giving your installation a finished look. The mount can support TVs with screen sizes from 51" to 70" and weighing up to 125 lbs. The articulated arm extends your TV up to 25" out from the wall. You can swivel your TV from side to side, and tilt it up or down for optimal viewing.
A safe design for mounting
Once you've secured the brace to the wall, the arm just slides into position. A safety lock that closes with an audible click lets you know the arm is securely in place. And once you've positioned the arm the way you want it, a sliding tab locks it for stability. The provided stud finder and plastic template ensure mounting hardware is properly spaced.
Fine-tune your TV's placement
After installation, the mount's "roll" adjustment lets you fine-tune your TV's position to ensure that the screen is perfectly level. The arm assembly can also be shifted slightly left or right on the wall plate so the TV is centered, even if your wall studs are off-center. Finally, the mount's hollow arm lets you thread cables through it, keeping them out of sight and free from tangles.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for TVs 51"-70"
- supports up to 125 lbs.
- pivoting arm extends TV up to 25" away from the wall
- tilt range: +5° to -15° (may vary with size of TV)
- roll adjustment: +3° to -3°
- in-arm wire channel conceals cables without inhibiting movement
- stud-mounting required
- 30-7/8"W x 18-5/8"H x 3-5/8"D (up to 25" with arm extended)
- warranty: 10 years
- MFR # VLF525-B1
What's in the box:
Sanus Premium Series VLF525 owner's manual
- 2 Horizontal TV brackets
- Vertical TV bracket
- Wall-plate
- Arm assembly
- Four M4 x30mm bolts
- Four M5 x 30mm bolts
- Four M6 x 35mm bolts
- Four M8 x 35mm bolts
- Four M4/M5 washers
- Four M6/M8 washers
- 4 Spacers
- Four 5/16" x 3-1/2" lag bolts
- 4 Anchors
- Stud-finder/level
- Wall-Mount Template
- Instruction Manual
- Online Product Registration
- Stud Finder/Level note
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for Sanus Premium Series VLF525
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus Premium Series VLF525
Features & specs
Features | ||
---|---|---|
Mount Type | Wall Mount | |
Motion | ||
Tilt | Yes | |
Swivel | Yes | |
Extend/Retract | Yes | |
Fixed | No | |
Roll (Level) Adjustment | Yes | |
Mounting Details | ||
Wood Stud (Single) | No | |
Wood Stud (Dual, 16-inch) | Yes | |
Wood Stud (Dual, 24-inch) | Yes | |
Concrete Block-compatible | Yes | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Features
Full-Motion Design: The Sanus Premium Series VLF525 full-motion, wall-mount bracket provides a 3-points of movement for an optimal viewing position. The VLF525 extends from the wall (3.625"-25"), tilts up/down (+5°/-15°), and swivels left or right (+/-90°) for easy viewing anywhere in the room.
TV Capacity: The Sanus Premium Series VLF525 wall-mount bracket is designed to support flat-panel TVs from 51" to 70", weighing up to 125 lbs.
VESA Bolt Pattern: The VLF525 full-motion, wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 300mm-700mm and a vertical hole spacing of 200mm-400mm. The Sanus VLF525 comes with M4, M5, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
- 500mm x 300mm
- 500mm x 400mm
- 600mm x 400mm
- 700mm x 400mm
Construction: The bracket is constructed of heavy-gauge steel and high-impact plastic with a durable powder-coated black finish.
Perfect Positioning: The TV brackets and arm assembly let your television slide from side-to-side on the wall-mount plate for perfect positioning of the TV on your wall. There are also two level adjustment screws on the TV bracket to raise or lower (+/-3°) the sides of the TV.
Safety Tabs: Once the wall plate is anchored to the wall studs, the arm assembly can be hooked into the wall bracket. An integrated safety tab on the TV bracket provides a safe and easy connection to the wall bracket you can hear. The TV brackets are then attached to the back of your television and then mounted to the assembly arm; a safety knob & tab secures it in place.
Cable Management: An in-arm cable management channel protects and conceals cables the length of the arm for a clean appearance, while decorative covers conceal assembly and mounting hardware of the wall-plate for a finished appearance.
Installation Tools: The following tools are recommended for mounting the VLF525:
- Tape measure
- Stud finder/level (included)
- Drill
- 7/32 Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- Hammer
- Pencil
Dimensions:
- Horizontal TV Bracket:
- Width = 29.5625"
- Height = 2.25"
- Depth = 1.25"
- Vertical TV Bracket:
- Width = 4.5"
- Height = 19.0625"
- Depth = 0.9375"
- Arm Assembly (retracted):
- Width = 14.9375"
- Height = 15.75"
- Depth = 2.1875"
- Wall Plate:
- Width = 30.875"
- Height = 15.75"
- Depth = 2.625"
The Sanus Premium Series VLF525 replaces these items
Sanus Classic MLF20-B1
- for TVs up to 63" and 130 lbs.
- articulated arm holds TV up to 19-1/2" from wall
- swivel range: 45° left and right; tilt range: +5° up and -15° down
Loading...
Loading accessories...
Customer Q&A
5 questions already asked
Loading...
Loading articles...
I will never use a stand again! This thing makes my 65 inch OLED TV look like we are in a movie theater! Tilt, swivel, full rotation!
Jim from OH