Sanus VisionMount VLT15 Super Slim tilting-mount places 37"-65" TVs just 0.875"
from the wall, yet still allows up to 10° of tilting capability. The VLT15
features the revolutionary Adjustable Virtual Axis technology, which allows tilt
tension to be adjusted to compensate for a variety of TV depths. Unlike other
ultra-thin mounts on the market, the VLT15 also offers additional exclusive
features that make it incredibly easy to install and use. ProSet
post-installation height and leveling adjustments allow the TV to be perfectly
positioned after hanging. ClickStand technology holds the TV away from the wall
for easy cable access without having to remove the TV from the mount. Wall plate
mounting holes are designed to accommodate 16" or 24" on-center studs.
Compatibility: The VLT15universal wall-mount bracket is designed to fit flat-panel
plasma and LCD monitors from 37" to 65". The TV can have a maximum
weight of 150 pounds.
Construction: The bracket is
constructed of heavy-gauge steel and high-impact plastic with a durable
powder-coated black finish.
Super Slim Design: This super slim tilting mount sits just .875" from
wall to complement the sleek look of ultra-thin flat-panel TVs.
Mounting: The wall plate must be
mounted to wall studs or anchored to a brick, block, or concrete wall using the supplied
lag bolts. The slots in the wall
plate can accommodate a variety of stud spacing, allowing you to easily mount
the TV to wall studs that are 16" or 24" on center. Once
the wall plate is anchored to the wall studs and the monitor brackets (with the TV
attached) are hooked onto the wall plate, the TV can slide left or right,
allowing you to center the TV on the wall. The ProSet feature allows you to also
make height and level adjustments. After
the TV is secured, it will be held approximately 0.875" from the wall.
Note: Each monitor bracket has
multiple bolt holes and can accommodate vertical hole
spacing (on the back of the TV) up to 21.625" (550mm). Since the
monitor brackets can slide on the wall plate, the horizontal hole spacing on the
back of the TV can range from 3.9375" (100mm)
to 32.4375" (823mm).
Steel Stud Mounting: If you wish to mount this Sanus wall mount in a
building with steel stud walls, you will need the Sanus SSMK1 Steel Stud
Mounting Kit (051SSMK1). Steel stud walls are typically found in commercial applications,
such as office buildings, warehouses, and condominiums.
Mounting Hardware/Bolt Pattern: The VLT15
comes with M4, M5, M6, and M8 bolts to mount the monitor brackets to your TV. Given the mounting
bracket's range of motion, it will accommodate the VESA100, 200, 400, 200 x 100,
300 x 200, 400 x 200, 400 x 300, 600 x 400, 800 x 400, and 800 x 500 mounting hole patterns in accordance with industry
standards set by the Video Electronics Standards Association.
Note: Additional hardware may be required for your specific
model of TV. For example; shorter or longer screws, thicker or slimmer
washers or spacers. These additional accessories can often be found at your
local hardware store.
Virtual Axis Technology: Once the TV is secured to
the wall, you can adjust the TV's angle. With the Virtual Axis fingertip tilt
system, the TV can tilt 10° down, and you can lock
the position by simply tightening a knob on each monitor bracket.
ClickStand: The VLT15's ClickStand feature allows you to tilt
the bottom of the TV outward and hold it there, giving you easy access to the
back panel for connecting cables. Once all the cables have been plugged in, you
can release the ClickStand and securely lock the TV into position on the wall
Quick Release Tabs: Convenient quick-release tabs stay hidden behind
your mounted TV, and easily pull down to unlock it from wall plate for cable
Installation Tools: The following tools are recommended for
mounting the VLT15:
- Stud finder
- Phillips-head screwdriver
- Electric drill
- Drill bits: 1/8" (wood studs) and 5/16" (masonry)
- Wrench or ratchet and socket: 1/2"
W = 35.4375",
H = 15.0", D = 0.875"
Monitor Brackets: W = 4.0" (4.1875" including knobs), H
= 23.5", D = 0.875"