About the Sanus VLT16
Mount your large TV close to your wall
Mount your large TV close to your wall
The slender Sanus VLT16 mount holds your TV a scant 7/8" from the wall, great for installations where you want ot keep the mounting depth to a minimum. An innovative Virtual Axis™ system lets you tilt your TV forward for optimal viewing, despite its closeness to the wall. The VLT16 can support a TV with a screen size of up to 80", and a weight of up to 125 lbs.
The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. You can also make small adjustments after the mount is affixed to the wall to level it, or even change the height. And the handy ClickStand at the bottom of each vertical brace swings out to prop your mounted TV away from the wall, to make cable hookup a breeze — without removing the TV from the mount.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- fits most flat-panel TVs from 51"-80"
- heavy-gauge steel construction with powder-coated finish
- supports up to 125 lbs.
- mount holds TV approximately 7/8" from wall
- tilt range: 0 to -10°
- built-in ClickStands hold a mounted TV out from the wall for cable installation
- ProSet allows post-installation horizontal adjustments of up to −5° to +5° and slight height adjustments
- stud-mounting required
- movable brackets for off-center stud placement
- includes all necessary hardware
- 29-5/16"W x 17-1/4"H x 7/8"D
- warranty: 10 years
- MFR # VLT16-B1
What's in the box:
- Wall-plate
- 2 TV brackets
- Four M4 x 12mm screws
- Four M4 x 35mm screws
- Four M6 x 12mm screws
- Four M6 x 20mm screws
- Four M6 x 35mm screws
- Four M8 x 16mm screws
- Four M8 x 20mm screws
- Four M8 x 35mm screws
- Four M4 washers
- Four M6/M8 washers
- Four Spacers
- Three 5/16" x 2-3/4" lag-bolts
- Three 5/16" washer
- 3 Concrete anchors
- Allen-Key
- Installation Manual
Customer reviews for Sanus VLT16
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus VLT16
Features & specs
Features | ||
---|---|---|
Mount Type | Wall Mount | |
Motion | ||
Tilt | Yes | |
Swivel | No | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | No | |
Wood Stud (Dual, 16-inch) | Yes | |
Wood Stud (Dual, 24-inch) | Yes | |
Concrete Block-compatible | Yes | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Features
TV Capacity: The Sanus VLT16 wall-mount bracket is designed to support flat-panel TVs from 40" to 85", weighing up to 125 lbs.
Construction: The bracket is constructed of heavy-gauge steel and high-impact plastic with a durable powder-coated black finish.
Super Slim & Tilt Design: The VLT16 features a super slim design that positions your TV only 0.82" from the wall. The VLT16 even lets you tilt your television downward by 10°.
Exclusive Installation Features: The VLT16 offers exclusive features that make it incredibly easy to install and use.
- Adjustable Virtual Axis Technology: Adjustable Virtual AxisT technology allows the bracket's tilt tension to be adjusted to compensate for a variety of TV depths.
- ProSet Post-Installation: ProSet post-installation height and leveling adjustments allow your TV to be perfectly positioned after hanging.
- ClickStand Technology: ClickStand technology holds the TV away from the wall for easy cable access without having to remove the TV from the mount.
VESA Mount Bolt Pattern: The VLT16's TV bracket consists of two vertical brackets with multiple slots that can accommodate a vertical hole spacing of 100mm-400mm on back of your TV. The vertical brackets slide along the VLT16's horizontally-mounted wall bracket, accommodating a horizontal hole spacing of 25mm-750mm on back of your television. The Sanus VLT16 comes with M4, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. Given the mounting bracket's range of motion, it will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 100mm x 100mm, 100mm x 150mm, 100mm x 200mm
- 200mm x 100mm, 200mm x 200mm, 200mm x 300mm, 200mm x 400mm
- 300mm x 100mm, 300mm x 200mm, 300mm x 300mm, 300mm x 400mm
- 400mm x 100mm, 400mm x 200mm, 400mm x 300mm, 400mm x 400mm
- 500mm x 100mm, 500mm x 200mm, 500mm x 300mm, 500mm x 400mm
- 600mm x 100mm, 600mm x 200mm, 600mm x 300mm, 600mm x 400mm
- 700mm x 200mm, 700mm x 300mm, 700mm x 400mm, 750mm x 400mm
16" or 24" OC: The VLT16's wall plate must be mounted to wall studs or anchored to a solid concrete or concrete block wall using the supplied lag bolts (and wall-anchors). The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the VLT16 to wall studs that are 16" or 24" on center.
Installation Tools: The following tools are recommended for mounting the VLT16:
- Tape measure
- Stud finder
- Level
- Drill
- 1/8" Drill bit (for wood studs)
- 5/16" Drill bit (for masonry)
- 7/16" Socket wrench
- Phillips-Head Screw driver
- Awl
- Pencil
Dimensions:
- Wall Bracket:
- Width = 29.3125"
- Height = 2.0"
- Depth = 0.6875"
- TV Brackets:
- Width = 3.3125"
- Height = 17.25"
- Depth = 0.6875"
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...
Simple to hang (find the studs, have a really good- preferably power- ratchet for the lag bolts and put up the support bar.) Fits very close to the wall, easily tilts, etc.
Chet from Staten Island, NY