TV Wall-Mount Bracket: The Sanus Premium Series VLT5 TV wall-mount
bracket tilts to give you the best view from the floor or couch. The fingertip
tilt allows for easy TV adjustments and tilts the TV back for easy cable access.
The VLT5 wall-mount brackets allows your TV to slide from side-to-side for
perfect positioning on the wall, and a safety tab provides a safe and easy
connection you can hear.
TV Capacity: The VLT5 wall-mount bracket is designed to support flat-panel
TVs from 51" to 80", weighing up to 125 lbs.
VESA Mount Bolt Pattern: The VLT5's TV bracket consists of two
vertical brackets with multiple slots that can accommodate a vertical hole
spacing of 200mm-400mm on back of your TV. The vertical brackets slide along the
VLT5's horizontally-mounted wall bracket, accommodating a horizontal hole
spacing of 200mm-700mm on back of your television. The Sanus VLT5 comes with M4,
M5, M6, and M8 size bolts of differing lengths to mount the bracket to your TV.
Given the mounting bracket's range of motion, it will accommodate the following
VESA hole patterns in accordance with industry standards set by the Video
Electronics Standards Association:
- 200mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
- 500mm x 300mm
- 600mm x 400mm
Note: Additional hardware may be required for your specific
model of TV. For example; shorter or longer screws, thicker or slimmer
washers or spacers. These additional accessories can often be found at your
local hardware store.
Wall Plate: The wall plate must be mounted to wall studs or anchored to
a brick, block, or concrete wall using the supplied lag bolts (and
wall-anchors). The slots in
the wall plate can accommodate a variety of stud spacing, allowing you to
easily mount the VLT5 to wall studs that are 16" or 24" on center.
Construction: The bracket is constructed of heavy-gauge
steel and high-impact plastic with a durable powder-coated black finish.
Adjustments: Your TV can slide left or right along the
wall-mount bracket, allowing you to center the TV on the wall. There is also a
level adjustment screw on top of either TV bracket to raise or lower the sides
of the TV. In addition, you can tilt your TV from -7° to + 12° in order to give
you a better viewing angle of your wall-mounted TV; tension knobs tighten the
bracket in place. Tilting the TV also provides easier access to cable
connections on back of the televisions.
Installation Tools: The following tools are recommended for
mounting the VLT5:
- Tape measure
- Stud finder/level (included)
- 7/32 Drill bit (for wood studs)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- Wall Bracket:
- Width = 30.9375"
- Height = 7.25"
- Depth = 0.9375"
- TV Brackets:
- Width = 2.3125"
- Height = 17.6875"
- Depth = 2.0625"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.