Skip Navigation

Sanus VMA202 Sound Bar Speaker Mount

Attach your sound bar or center channel speaker directly to your TV mount

10 Reviews | 4 questions - 4 answers

Item #: 051VMA202

In Stock

Was: $79.99

Savings: -$10.00

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Overview

Our take on the Sanus VMA202 Sound Bar Speaker Mount

The Sanus VisionMount™ VMA202 lets you mount your sound bar or center channel speaker below your wall-mounted plasma or LCD TV for a clean-looking, good-sounding system. This sturdy bracket lets you fasten your wall-mountable speaker directly to your compatible Sanus TV mount, so you won't have to drill any additional holes in your wall. And because the VMA202 connects directly to your Sanus wall mount, your speaker will always remain in the same plane as your TV, no matter how you adjust it.

The Sanus VisionMount™ VMA202 lets you mount your sound bar or center channel speaker below your wall-mounted plasma or LCD TV for a clean-looking, good-sounding system. This sturdy bracket lets you fasten your wall-mountable speaker directly to your compatible Sanus TV mount, so you won't have to drill any additional holes in your wall. And because the VMA202 connects directly to your Sanus wall mount, your speaker will always remain in the same plane as your TV, no matter how you adjust it.

Note: The total weight of the TV and speaker must not exceed the TV mount rating.

Easy assembly and works great

Anonymous, Houston Tx

What's in the Box:

  • Upright metal bracket
  • Metal speaker bracket
  • 2 Metal speaker bracket adapter plates
  • 2 Metal back-plates Hinged metal bracket
  • Metal hanging bracket
  • Metal bracket wrench
  • Metal bracket plate
  • Metal fixing plate
  • 2 Threaded knobs
  • Two 3/8-16 x 0.625" bolts
  • Two 3/8-16 x 1.5" bolts
  • Two M10 x 16mm bolts
  • Two M10 x 40mm bolts
  • Ten M4 x 16mm bolts
  • Six M4 x 35mm bolts
  • Ten M6 x 8mm bolts
  • Six M6 x 16mm bolts
  • Two M6 x 12mm bolts
  • Four 1/4-20 x 0.5" bolts
  • Four 1/4-20 x 0.75" bolts
  • Five 1/4-20 x 1.25" bolts
  • Four 1/4-20 x 1.5" bolts
  • Four 1/4-20" nuts
  • Four M4/M5 star-washers
  • Four 1/4"/M6 star-washers
  • Eight M4/M5 flat-washers
  • Four 1/4-20"/M6 flat-washers
  • Four M4/M5 spacers
  • Four 1/4-20"/M6 spacers
  • Four 3/8-16"/M10 spacers
  • 18 Wire-ties
  • Long 5mm hex-key
  • Short 5mm hex-key
  • Installation Instructions

Product Highlights:

  • for use with compatible Sanus flat-panel TV wall mounts, including the XF228, LF228, VLF220, VLF210, VMF220, and VLMF109
  • universal design fits sound bars and center channel speakers weighing up to 35 lbs.
  • ProSet™ height adjustment raises or lowers the speaker beneath the TV
  • extruded aluminum and heavy-gauge steel construction
  • powder-coated finish
  • mounting hardware included
  • warranty: 10 years
  • Our 60-day money-back guarantee
Reviews

Sanus VMA202 Sound Bar Speaker Mount Reviews

Average Customer Review:

10 Reviews

Sanus VMA202 Sound Bar Speaker Mount

Written by: Anonymous from Houston Tx on March 7, 2014

Crutchfield Customer Review (What's this?)

Easy assembly and works great

Pros: Ease of assembly

Cons: none

Sound Bar Mount

Written by: DC from Vilonia, AR on January 27, 2014

Crutchfield Customer Review (What's this?)

Very good product that attached directly to my Sanus TV mount. It works great and allows the sound bar to be elevated off the ground for better sound.

Pros: Worked well with my Sanus TV mount

Cons: It was challenging plugging in HDMI cords and power cords to the Sound bar once the Sound bar is mounted.

Great product

Written by: Rocky from Rapid City, SD on December 6, 2013

Crutchfield Customer Review (What's this?)

Works great!! I had the tv wall mount so this is the best way to mount a sound bar.

Pros: Excellent quality

Cons: $$$

Floating Sound Bar

Written by: Fred from California on June 6, 2013

Crutchfield Customer Review (What's this?)

Like other purchasers, my room required a sound bar to be mounted below a Samsung flat screen hanging diagonally in the corner of a room. To the best of my knowledge, this is the ONLY product that allows such mounting. If you need/want a self-powered sound bar, give up looking now and order Bose 1SR, which has the threaded mounts required, and purchase your own 5M bolts at you local hardware store. It took Crutchfield a year to find me this compatible sound bar. I had mine professionally installed, so not aware of any mounting difficulties.

Pros: Perfect product if you want to mount a sound bar below a 'floating" flat screen.

Cons: VERY, VERY limited choices of compatible self-powered sound bars! Yamaha YSP-5100 is way to large for anything short of 60-65" flat screen.

Sound Bar Mount

Written by: Chris C from Bay Area, CA on February 18, 2013

Crutchfield Customer Review (What's this?)

The Sanus VMA202 Sound Bar mount worked very well with the Sanus VLF210 TV mount. Easy to install with plenty of strength and adjustability. My only issue with the mount, was I needed to use the provided extenders to mount the Klipsch SB-1 Sound Bar due to length. These extenders were larger than the Sound Bar so you could see the extenders from behind the sound bar (it did not have a clean of a look). So I needed to drill my own holes for mounting of the sound bar. After that, it looks and functions execllent.

Pros: Strong, good adjusctment, pleanty of hardware and mounted well to TV mount.

Cons: Did not fit my Sound Bar cleanly.

Sound Bar Wall Mount

Written by: Soundbar from Augusta, GA on January 23, 2013

Crutchfield Customer Review (What's this?)

Limited adjustments, over priced, too many left over parts, but gets the job done.

Pros: Good alignment, confident it would match manufacturer of the TV mount.

Cons: Slightly unstable, too much Gap between tv and sound bar (wires are visible).

Perfect fit for Sanus TV Mount

Written by: RobW from Milwaukee, WI on January 7, 2013

Crutchfield Customer Review (What's this?)

We were very pleased to find the Sanus VMA202 Sound Bar Speaker Mount. It fits perfectly with the Sanus TV mount and is exactly what we needed. Our new 55" Samsung LED TV is mounted so that it is angled and we wanted to eliminate multiple speakers. We had visited some electronics stores which told us nothing like this existed. The mount is installed and now holds our new speaker bar. Thanks to Crutchfield for offering a great product solution at an awesome price!

Pros:

Cons:

Sanus VMA202 Sound Bar Speaker

Written by: Terry from Florida on December 5, 2012

Crutchfield Customer Review (What's this?)

I am fairly mechanically inclined, but this thing is tough to figure out. Got it done but looks weird. Hangs down to low.

Pros:

Cons: Very difficult to put together.

Sanus VMA202 Sound Bar Speaker Mount

Written by: Scott from New York, NY on February 28, 2011

Crutchfield Customer Review (What's this?)

I purchased this for use with a Sanus XF228 Full Motion Wall Mount. It was the perfect addition since the LED TV would be located in the corner of the room. This product allows the center speaker to compliment the direction of the screen regardless of the angle . Very easy to assemble and install, from the box to the wall mount in 10 minutes. Very Happy with this item.

Pros:

Cons:

Sanus VMA202 Sound Bar Speaker Mount

Written by: Peter from Connecticut on November 30, 2010

Crutchfield Customer Review (What's this?)

Very comprehensive unit. Directions could've been better. They make it so inclusive of every possible mounting configuration, it can be confusing which to use. Because it's meant as a universal bracket to the many soundbars available, I actually used very few of the multitude of parts. Felt badly throwing away 99% of the mounting/attachment hardware. Unit looks great and works as advertised. Have a Sony 55" LED TV.

Pros:

Cons:

Details

Hands-on research

What's in the box?

Download the Sanus VMA202 Sound Bar Speaker Mount manual

  • Upright metal bracket
  • Metal speaker bracket
  • 2 Metal speaker bracket adapter plates
  • 2 Metal back-plates Hinged metal bracket
  • Metal hanging bracket
  • Metal bracket wrench
  • Metal bracket plate
  • Metal fixing plate
  • 2 Threaded knobs
  • Two 3/8-16 x 0.625" bolts
  • Two 3/8-16 x 1.5" bolts
  • Two M10 x 16mm bolts
  • Two M10 x 40mm bolts
  • Ten M4 x 16mm bolts
  • Six M4 x 35mm bolts
  • Ten M6 x 8mm bolts
  • Six M6 x 16mm bolts
  • Two M6 x 12mm bolts
  • Four 1/4-20 x 0.5" bolts
  • Four 1/4-20 x 0.75" bolts
  • Five 1/4-20 x 1.25" bolts
  • Four 1/4-20 x 1.5" bolts
  • Four 1/4-20" nuts
  • Four M4/M5 star-washers
  • Four 1/4"/M6 star-washers
  • Eight M4/M5 flat-washers
  • Four 1/4-20"/M6 flat-washers
  • Four M4/M5 spacers
  • Four 1/4-20"/M6 spacers
  • Four 3/8-16"/M10 spacers
  • 18 Wire-ties
  • Long 5mm hex-key
  • Short 5mm hex-key
  • Installation Instructions

Product Research

Features

Overview: The Sanus VisionMount VMA202 soundbar speaker mount attaches directly to VisionMount XF228, LF228, VLF220, VLF210, VMF220, VLMF109 and VXF220 wall mounts , so you can mount your soundbar, digital processor speaker, or center channel with no additional drilling under your wall-mounted flat-panel TV. The VMA202's extruded aluminum and heavy-gauge steel construction is strong and sturdy. Its universal design fits most soundbars and center-channel speakers up to 35 lbs. ProSet height macro adjustments raise or lower the speaker relative to the TV, and ProSet level micro adjustments allow easy horizontal leveling for perfect speaker positioning.

Compatibility: The Sanus VMA202 attaches directly to VisionMount XF228, LF228, VLF220, VLF210, VMF220, VLMF109 and VXF220 mounts for an optimal listening experience with no additional drilling required. Its universal design fits most soundbars and center-channel speakers up to 35 lbs, which feature rear-panel threaded inserts for wall-mounting purposes.

Construction: The Sanus VisionMount Soundbar Speaker Mount features extruded aluminum and heavy-gauge steel construction which is strong and sturdy. The VMA2020 features a black finish.

Proset Adjustment: The Sanus VMA202 Soundbar Speaker Mount features Proset height and level adjustment which raises or lowers the speaker beneath the TV, and allows you to level your mounted soundbar horizontally. ProSet technology lets you make micro-adjustments to height and level after mounting to ensure perfect positioning.

Installation: The VisionMount VMA202 features a vertical mounting bracket that attaches to your compatible Sanus TV wall-mount bracket and a horizontal mounting bracket which attaches to your soundbar speaker. The vertical mounting bracket attaches to your compatible Sanus TV wall-mount bracket using an integrated clamp and supplied hardware. The horizontal speaker mounting bracket mounts to your sound bar using the supplied adapter plates & mounting bolts. The speaker mounting bracket provides a horizontal spacing of 10" to 26.5" to accommodate your soundbar speaker's threaded insert pattern. There are two adapter plates which extend the horizontal spacing to 31". The speaker mounting bracket can be installed using two (minimum) or four (maximum) mounting bolts.

Hardware: The Sanus VMA202 comes supplied with a variety of mounting bolts to fit the threaded inserts on the back of your soundbar speaker. The VMA202 includes the following sizes of mounting bolts - M4, M6, M10, 3/8"-16, 1/4"-20 to 3/8"-16, or 1/4"-20.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

For a further Sound bar installation that is compatible with this mount. [ TYRONE  Apr 07, 2016 ]
Purchased this sound bar mount because it will attach to my TV mount (LF228) [ JOHN J  Feb 25, 2016 ]
Because of full motion [ Richard A.  Jan 18, 2016 ]
Goes together with SANUS VM220, great TV mount [ FRANCISCO  Jan 11, 2016 ]

4 questions already asked

The Sanus VisionMount VMA202 soundbar speaker mount was designed specifically for the Sanus VisionMount series. The Sanus XF228, LF228, VLF220, VLF210, VMF220, VLMF109 and VXF220 wall mounts are the compatible options for this soundbar mount. However, the Sanus SA405 mount would work with the MLF13: http://www.crutchfield.com/p_051SA405/Sanus-SA405-Sound-Bar-Speaker-Mount.html?tp=933 [ Larry  Dec 30, 2015 ]  Staff
Manufacturer lists for use with compatible Sanus flat-panel TV wall mounts, including the XF228, LF228, VLF220, VLF210, VMF220, and VLMF109. Since we don't carry the mount you have, we would be unable to confirm. I would check with the manufacturer to be sure. [ Kenny  Dec 29, 2015 ]  Staff
This is designed for use with compatible Sanus flat-panel TV wall mounts, including the XF228, LF228, VLF220, VLF210, VMF220, and VLMF109 [ Jeff  Apr 16, 2015 ]  Staff
We don't have a listing of all the soundbars this will work with. However, as long as your soundbar is under 35 lbs and has rear-panel threaded inserts for wall-mounting, then you should be good to go. [ Jeff  Feb 24, 2014 ]  Staff

Searches related to the Sanus VMA202 Sound Bar Speaker Mount Attach your sound bar or center channel speaker directly to your TV mount