About the Sanus Premium Series VMF518
The Sanus Premium Series VMF518 makes it easy to wall-mount and precisely position your mid-sized TV. This full-motion bracket can support TVs with screen sizes from 40" to 50" and weighing up to 75 lbs. The articulated arm extends your TV up to 18-3/4" out from the wall. The mount lets you swivel your TV from side to side, and you can also tilt it up or down for optimal viewing. You can also rotate the bracket 90° for either landscape or portrait viewing.
A smart, safe design for convenient mounting
Sanus' tools-free assembly makes setup simple. Once you've secured the brace to the wall, the arm just slides into position. A safety lock that closes with an audible click lets you know the arm is securely in place.
Fine-tune your TV's placement
The arm assembly can also be shifted slightly left or right on the wall plate so the TV is centered, even if your wall studs are off-center. Finally, channels in the mount's arm lets you thread cables through it, keeping them free from tangles.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for TVs 40"-50"
- supports up to 75 lbs.
- pivoting arm positions TV up to 18-3/4" away from wall
- vertical tilt range: +12° to -12° (may vary with size of TV)
- bracket rotates 90° for landscape or portrait viewing
- in-arm wire channel conceals cables without inhibiting movement
- tools-free mount assembly
- stud-mounting required
- 17"W x 18-5/8"H x 3-5/8"D (up to 18-3/4" with arm extended)
- warranty: 10 years
- MFR # VMF518-B1
What's in the box:
Sanus Premium Series VMF518 owner's manual
- Arm assembly/wall-plate
- 2 Horizontal TV brackets
- Vertical TV bracket
- Four M4 x 35mm screws
- Four M5 x 35mm screws
- Four M6 x 35mm screws
- Four M8 x 35mm screws
- Four M8 x 45mm screws
- Four M4/M5 washers
- Four M6/M8 washers
- 4 Spacers
- Two 5/16" x 2-3/4" lag bolts
- 2 Wall-anchors
- Stud-finder/level
- Wall-Mount Template
- Instruction Manual
- Online Product Registration
- Stud Finder/Level note
Customer reviews for Sanus Premium Series VMF518
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus Premium Series VMF518
Features & specs
Features | ||
---|---|---|
Mount Type | Full-motion | |
Motion | ||
Tilt | No | |
Swivel | No | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | No | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | No | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Features
Full-Motion Design: The Sanus Premium Series VMF518 full-motion, wall-mount bracket provides a 4-points of movement for an optimal viewing position. The VMF518 extends from the wall (3.25"-18.75"), tilts up/down (+/-12°), and swivels left or right (+/-55°) for easy viewing anywhere in the room. The bracket can also be rotated 90° to the left or right for landscape or portrait viewing.
TV Capacity: The Sanus Premium Series VMF518 wall-mount bracket is designed to support flat-panel TVs from 40" to 50", weighing up to 75 lbs.
VESA Bolt Pattern: The VMF518 full-motion, wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 200mm-400mm and a vertical hole spacing of 200mm-400mm. The Sanus VMF518 comes with M4, M5, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 200mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
Construction: The bracket is constructed of heavy-gauge steel and high-impact plastic with a durable powder-coated black finish.
Wall Plate: The wall plate must be mounted to a wall stud or anchored to a solid concrete or concrete block wall using the supplied lag bolts (and wall-anchors).
Cable Management: An in-arm cable management channel protects and conceals cables the length of the arm for a clean appearance, while a decorative cover conceals assembly and mounting hardware of the wall-plate for a finished appearance.
Safety Tab: A safety tab provides a safe and easy connection you can hear.
Installation Tools: The following tools are recommended for mounting the VMF518:
- Tape measure
- Stud finder/level (included)
- Drill
- 7/32 Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- Hammer
Dimensions:
- Horizontal TV Brackets:
- Width = 17.25"
- Height = 2.3125"
- Depth = 1.0"
- Vertical TV Bracket:
- Width = 2.6875"
- Height = 19.0625"
- Depth = 1.125"
- Arm Assembly/Wall Plate:
- Width = 2.875" (wall plate)
- Height = 8.25" (wall plate)
- Depth = 3.25"-18.75" (arm extension)
The Sanus Premium Series VMF518 replaces these items
Sanus VMF220
- for flat-panel TVs from 32"-47" and up to 100 lbs.
- in-arm wire channel conceals cables without inhibiting movement
- swivel range: +75° to -85°; tilt range: +5° to -15°
Sanus VisionMount VM400S
- For 15"-42" TVs
- supports up to 80 lbs.
- tilt range: +5° to -15°
Sanus VisionMount VM400B
- For 15"-42" TVs
- supports up to 80 lbs.
- tilt range: +5° to -15°
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...
This is the second Sanus wall mount unit I've purchased and they are both exceptionally good products. It was almost a pleasure installing it because of the great design, hardware, and very clear instructions.
Bruce J from Houston