Skip Navigation

Want your flat-panel TV really close to the wall? The ultra-thin Sanus VML10 holds it a scant 11/16" out. Don't worry — this durable heavy-gauge design is strong enough to keep your TV firmly in place. The VML10 can support a TV with a screen size up to 47", and a weight of up to 80 lbs.

The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. You can also make small adjustments after the mount is affixed to the wall, to level it, or even change the height. And the handy ClickStand at the bottom of each vertical brace swings out to prop your mounted TV away from the wall, to make cable hookup a breeze — without removing the TV from the mount.

Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.

Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.

Product Highlights:

  • fits most flat-panel plasma and LCD TVs with screen sizes from 26"-47"
  • heavy-gauge steel construction with powder-coated finish
  • supports up to 80 lbs.
  • mount holds TV approximately 11/16" from wall
  • built-in ClickStands hold mounted TV out from wall for cable installation
  • stud-mounting required
  • movable brackets for off-center stud placement
  • includes all necessary hardware
  • brackets: 18-3/4"W x 17-1/2"H x 11/16"D
  • warranty: 10 years
  • Our 60-day money-back guarantee

Sanus VML10 Reviews

Average Customer Review:

5 Reviews

Sanus VML10

Written by: Scuba Dave from Peachtree City, GA on February 13, 2013

Crutchfield Customer Review (What's this?)

This product exceeded my expectations for high quality and features when compared to other 'non-adjustable' low profile wall mount solutions on the market today.

Due to the design of the TV (Sony 46HX750 46 Inch 1080p LED) AUX input jacks; you will need to purchase RCA Right Angle Adapters when connecting component equipment.

Pros: Ample variety/sizes of mounting harware (Screws, bolts, washers etc.) when mounting in various construction environments.

Cons: None

Slim, snug fit

Written by: miwuk kid from Danville Ca on October 11, 2012

Crutchfield Customer Review (What's this?)

The mount is very thin and gives the LED TV a snug fit to the wall. So snug that it bent the HDMI cable when I mounted the TV to the wall bracket. I moved the cable to the side of the TV to overcome the problem. It has two pulleys that you use to have the TV snap into the bracket. They didn't work that well (maybe the power cord was in the way) and then they hung below the TV. I had to tape them behind the TV.

Pros: Very clean look. You don't see the bracket even from a side view.

Cons: Might be a lttle too snug for cables, the pulleys didn't do their job.

Simple & low profile

Written by: CC from Prospect Heights, IL on July 16, 2012

Crutchfield Customer Review (What's this?)

Needed low profile as I was hanging TV in a bedroom walk area. This item did the job. With Toshiba 40L5200U LED/LCD flat screen the TV/mount is only 1 3/4 " out from wall. Mount is pretty simple; a mounting plate and then 2 pcs that attach to TV. TV then just hooks on mounting plate, like hanging a picture. Not much room behind TV for cabling and electric but it worked fine. Clean install as the TV indeed looks like a picture hanging on the wall. Problem now is I need to find somewhere to put DVD, DVR/cable box.

Pros: Low profile, great for rooms with limited space. Low profile also offers great aesthetics as TV is not the first item in room catching your eye. Easy install

Cons: Not good if you need to adjust TV viewing angle(s) as mount is non-adjustable.

awesome kool

Written by: Andrew from Tununak AK on November 18, 2011

Crutchfield Customer Review (What's this?)

totally cool i love it amazing wall mount and my LED TV great big screen for my bed room so cool

Pros: wow its so slim and its really cool less space and light weight easy install just use one stud on the wall ( we call it in eskimo still 2x4 stud) yup


Good close contact to wall

Written by: Dr. Snyder from Payson, AZ on May 23, 2011

Crutchfield Customer Review (What's this?)

This was easy to put up and holds the TV very close and securely to the wall, It is also easy to take the TV off in case you want to temporarily move it or clean behind it. The only problem is that the TV is too close to the wall to plug in any computer cables, or anything on the back side. Since we purchased ours in part for doing power point presentations, that is a major drawback.



Hands-on research

What's in the box?

Download owner's manual

  • Wall plate
  • 2 TV mounting brackets
  • 4 Philips-head bolts (M4 x 12mm)
  • 4 Philips-head bolts (M5 x 12mm)
  • 4 Philips-head bolts (M6 x 14mm)
  • 4 Philips-head bolts (M8 x 16mm)
  • 4 Philips-head bolts (M4 x 30mm)
  • 4 Philips-head bolts (M5 x 30mm)
  • 4 Philips-head bolts (M6 x 40mm)
  • 4 Philips-head bolts (M8 x 45mm)
  • 4 Philips-head bolts (M4 x 40mm)
  • 4 Philips-head bolts (M5 x 40mm)
  • 4 Hex-head lag bolts (length=2.5")
  • 4 Plastic spacers (14mm)
  • 4 Plastic spacers (24mm)
  • 4 Flat washers (M4/M5)
  • 4 Flat washers (M6/M8)
  • 4 Plastic caps
  • 4 Wall anchors
  • Hex key
  • Instruction Manual

Product Research


Overview: The Sanus VisionMount VML10 Super Slim low-profile wall mount is designed to emphasize the sleek look of ultra-thin LCD, plasma, and LED TVs by placing them just 0.6875" from the wall. The VML10 features exclusive ClickStand technology, which holds the bottom of the TV away from the wall for easy cable access without removing the TV from the mount. Convenient quick-release tabs on the mounting brackets stay hidden, but easily pull down to unlock the TV from the wall plate for cable access. The VML10 also allows lateral shift adjustment, allowing the TV to slide left and right on the wall plate so it's positioned exactly where you want it, even with off-center wall studs. Universal mounting pattern fits virtually any 26" to 47" flat-panel TV up to 80 lbs.

Capacity: The VisionMount VML10 is designed for 26" to 47" flat-panel TVs. It has a maximum weight capacity of up to 80 lbs.

Bolt Pattern: The monitor bracket has multiple vertical slots and can accommodate vertical hole spacing (on the back of the TV) from 0.985" (25mm) up to 15.75" (400mm). The unit can expand horizontally for larger TVs. The vertical brackets can slide along the horizontal bars, accommodating a horizontal hole spacing from 1.968" (50mm) to nearly 16.75" (425mm). The VML10 comes with M4, M5, M6, and M8 size bolts of differing lengths to mount the brackets to your TV.

VESA Mount: Given the mounting bracket's range of motion, it will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:

  • 100mm x 100mm
  • 200mm x 200mm
  • 200mm x 200mm
  • 300mm x 200mm
  • 300mm x 300mm
  • 400mm x 200mm
  • 400mm x 300mm
  • 400mm x 400mm

Super Slim Design: This Super Slim low-profile mount places your TV just 0.6875" from wall to maximize its sleek, thin appearance.

ClickStand Technology: Innovative ClickStand technology holds TV away from wall for easy cable access without having to remove TV. The unique ClickStand feature makes it easy to access the rear-panel of  your wall-mounted television. Its "kick-stand" props the television 4" away from the wall so you can install cables without removing the TV from the mount.

Quick-Release Tabs: Convenient quick-release tabs on mounting brackets stay hidden, but easily pull down to unlock TV from wall plate for cable access.

Rail Design: The VML10's rail design allows your mounted TV to shift left and right for perfect placement, even with off-center studs.

Wall Mounting: The bracket should be mounted to a wood wall stud, solid concrete, or concrete block using the supplied wall-mount lag screws. Required tools include:

  • Stud finder
  • Level
  • Awl
  • Hammer
  • Phillips-head screwdriver
  • Drill with 3/16" bit for wood stud installations (3/8" bit for masonry)
  • Tape measure (ruler)

Steel Stud Mounting: If you wish to mount this Sanus wall mount in a building with steel stud walls, you will need the Sanus SSMK1 Steel Stud Mounting Kit (051SSMK1). Steel stud walls are typically found in commercial applications, such as office buildings, warehouses, and condominiums.


  • Wall Plate: 18.75" wide x 4.875" tall x 0.5625" deep
  • TV Bracket: 1.9375" wide x 17.5" tall x 0.625" deep

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.