Overview: The Sanus VisionMount VML10 Super Slim
low-profile wall mount is designed to emphasize the sleek look of ultra-thin
LCD, plasma, and LED TVs by placing them just 0.6875" from the wall. The VML10
features exclusive ClickStand technology, which holds the bottom
of the TV away from the wall for easy cable access without removing the TV from
the mount. Convenient quick-release tabs on the mounting brackets stay hidden,
but easily pull down to unlock the TV from the wall plate for cable access. The
VML10 also allows lateral shift adjustment, allowing the TV to slide left and
right on the wall plate so it's positioned exactly where you want it, even with
off-center wall studs. Universal mounting pattern fits virtually any 26" to 47"
flat-panel TV up to 80 lbs.
Capacity: The VisionMount VML10 is designed for 26" to 47"
flat-panel TVs. It has a maximum weight capacity of up to 80 lbs.
Bolt Pattern: The monitor bracket
has multiple vertical slots and can accommodate vertical hole spacing (on the
back of the TV) from 0.985" (25mm) up to 15.75" (400mm). The unit can expand
horizontally for larger TVs. The vertical brackets can slide along the
horizontal bars, accommodating a horizontal hole spacing from 1.968" (50mm) to
nearly 16.75" (425mm). The VML10 comes with M4, M5, M6, and M8 size bolts of
differing lengths to mount the brackets to your TV.
VESA Mount: Given the mounting bracket's
range of motion, it will accommodate the following VESA hole patterns in
accordance with industry standards set by the Video Electronics Standards
- 100mm x 100mm
- 200mm x 200mm
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 200mm
- 400mm x 300mm
- 400mm x 400mm
Super Slim Design: This Super Slim low-profile mount places your TV
just 0.6875" from wall to maximize its sleek, thin appearance.
ClickStand Technology: Innovative ClickStand technology holds TV away from wall
for easy cable access without having to remove TV.
The unique ClickStand feature makes it easy to access the rear-panel of
your wall-mounted television. Its "kick-stand" props the television 4" away from
the wall so you can install cables without removing the TV from the mount.
Quick-Release Tabs: Convenient quick-release tabs on mounting brackets
stay hidden, but easily pull down to unlock TV from wall plate for cable access.
Rail Design: The VML10's rail design allows your mounted TV to shift
left and right for perfect placement, even with off-center studs.
Wall Mounting: The bracket should be mounted to a wood wall
stud, solid concrete, or concrete block using the supplied wall-mount lag
screws. Required tools include:
- Stud finder
- Phillips-head screwdriver
- Drill with 3/16" bit for wood stud installations
(3/8" bit for masonry)
- Tape measure (ruler)
Steel Stud Mounting: If you wish to mount this Sanus wall mount in a
building with steel stud walls, you will need the Sanus SSMK1 Steel Stud
Mounting Kit (051SSMK1). Steel stud walls are typically found in commercial applications,
such as office buildings, warehouses, and condominiums.
- Wall Plate: 18.75" wide x 4.875" tall x 0.5625" deep
- TV Bracket: 1.9375" wide x
17.5" tall x 0.625" deep
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.