About the Sanus VML10
Want your flat-panel TV really close to the wall? The ultra-thin Sanus VML10 holds it a scant 11/16" out. Don't worry — this durable heavy-gauge design is strong enough to keep your TV firmly in place. The VML10 can support a TV with a screen size up to 47", and a weight of up to 80 lbs.
The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. You can also make small adjustments after the mount is affixed to the wall, to level it, or even change the height. And the handy ClickStand at the bottom of each vertical brace swings out to prop your mounted TV away from the wall, to make cable hookup a breeze — without removing the TV from the mount.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- fits most flat-panel plasma and LCD TVs with screen sizes from 26"-47"
- heavy-gauge steel construction with powder-coated finish
- supports up to 80 lbs.
- mount holds TV approximately 11/16" from wall
- built-in ClickStands hold mounted TV out from wall for cable installation
- stud-mounting required
- movable brackets for off-center stud placement
- includes all necessary hardware
- brackets: 18-3/4"W x 17-1/2"H x 11/16"D
- warranty: 10 years
- MFR # VML10-B1
What's in the box:
- Wall plate
- 2 TV mounting brackets
- 4 Philips-head bolts (M4 x 12mm)
- 4 Philips-head bolts (M5 x 12mm)
- 4 Philips-head bolts (M6 x 14mm)
- 4 Philips-head bolts (M8 x 16mm)
- 4 Philips-head bolts (M4 x 30mm)
- 4 Philips-head bolts (M5 x 30mm)
- 4 Philips-head bolts (M6 x 40mm)
- 4 Philips-head bolts (M8 x 45mm)
- 4 Philips-head bolts (M4 x 40mm)
- 4 Philips-head bolts (M5 x 40mm)
- 4 Hex-head lag bolts (length=2.5")
- 4 Plastic spacers (14mm)
- 4 Plastic spacers (24mm)
- 4 Flat washers (M4/M5)
- 4 Flat washers (M6/M8)
- 4 Plastic caps
- 4 Wall anchors
- Hex key
- Instruction Manual
Customer reviews for Sanus VML10
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus VML10
Features & specs
Features | ||
---|---|---|
Mount Type | Flat panel TV | |
Motion | ||
Tilt | No | |
Swivel | No | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | No | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | No | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Features
Overview: The Sanus VisionMount VML10 Super Slim low-profile wall mount is designed to emphasize the sleek look of ultra-thin LCD, plasma, and LED TVs by placing them just 0.6875" from the wall. The VML10 features exclusive ClickStand technology, which holds the bottom of the TV away from the wall for easy cable access without removing the TV from the mount. Convenient quick-release tabs on the mounting brackets stay hidden, but easily pull down to unlock the TV from the wall plate for cable access. The VML10 also allows lateral shift adjustment, allowing the TV to slide left and right on the wall plate so it's positioned exactly where you want it, even with off-center wall studs. Universal mounting pattern fits virtually any 26" to 47" flat-panel TV up to 80 lbs.
Capacity: The VisionMount VML10 is designed for 26" to 47" flat-panel TVs. It has a maximum weight capacity of up to 80 lbs.
Bolt Pattern: The monitor bracket has multiple vertical slots and can accommodate vertical hole spacing (on the back of the TV) from 0.985" (25mm) up to 15.75" (400mm). The unit can expand horizontally for larger TVs. The vertical brackets can slide along the horizontal bars, accommodating a horizontal hole spacing from 1.968" (50mm) to nearly 16.75" (425mm). The VML10 comes with M4, M5, M6, and M8 size bolts of differing lengths to mount the brackets to your TV.
VESA Mount: Given the mounting bracket's range of motion, it will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 100mm x 100mm
- 200mm x 200mm
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 200mm
- 400mm x 300mm
- 400mm x 400mm
Super Slim Design: This Super Slim low-profile mount places your TV just 0.6875" from wall to maximize its sleek, thin appearance.
ClickStand Technology: Innovative ClickStand technology holds TV away from wall for easy cable access without having to remove TV. The unique ClickStand feature makes it easy to access the rear-panel of your wall-mounted television. Its "kick-stand" props the television 4" away from the wall so you can install cables without removing the TV from the mount.
Quick-Release Tabs: Convenient quick-release tabs on mounting brackets stay hidden, but easily pull down to unlock TV from wall plate for cable access.
Rail Design: The VML10's rail design allows your mounted TV to shift left and right for perfect placement, even with off-center studs.
Wall Mounting: The bracket should be mounted to a wood wall stud, solid concrete, or concrete block using the supplied wall-mount lag screws. Required tools include:
- Stud finder
- Level
- Awl
- Hammer
- Phillips-head screwdriver
- Drill with 3/16" bit for wood stud installations (3/8" bit for masonry)
- Tape measure (ruler)
Steel Stud Mounting: If you wish to mount this Sanus wall mount in a building with steel stud walls, you will need the Sanus SSMK1 Steel Stud Mounting Kit (051SSMK1). Steel stud walls are typically found in commercial applications, such as office buildings, warehouses, and condominiums.
Dimensions:
- Wall Plate: 18.75" wide x 4.875" tall x 0.5625" deep
- TV Bracket: 1.9375" wide x 17.5" tall x 0.625" deep
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
totally cool i love it amazing wall mount and my LED TV great big screen for my bed room so cool
Andrew from Tununak AK