At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Dimensions
Features
Compatibility: The
VMPL50
universal wall-mount bracket is designed to fit flat-panel
plasma and LCD monitors from 30" to 56". The TV can have a maximum
weight of 130 pounds.
Construction: The bracket is
constructed of heavy-gauge steel with a durable powder coated black or silver finish.
Mounting: The wall plate must be
mounted to wall studs or anchored to a brick, block, or concrete wall using the supplied
lag bolts. The slots in the wall
plate can accommodate a variety of stud spacing, allowing you to easily mount
the TV to wall studs that are 16" or 24" on center. Once
the wall plate is anchored to the wall studs and the monitor brackets (with the TV
attached) are hooked onto the wall plate, the TV can slide left to right,
allowing you to center the TV on the wall. After
the TV is secured, it will be held approximately 2-3/8" from the wall.
Note: Each monitor bracket has
multiple bolt holes and can accommodate vertical hole
spacing (on the back of the TV) up to 17-3/8". Since the
monitor brackets can slide on the wall plate, the horizontal hole spacing on the
back of the TV can range from 1-3/4"
to 26-1/2".
Steel Stud Mounting: If you wish to mount this Sanus wall mount in a
building with steel stud walls, you will need the Sanus SSMK1 Steel Stud
Mounting Kit (051SSMK1). Steel stud walls are typically found in commercial applications,
such as office buildings, warehouses, and condominiums.
Mounting Hardware: The VMPL50
comes with M4, M5, M6, and M8 bolts to mount the monitor brackets to your TV.
VESA: Given the mounting
bracket's range of motion, it will accommodate the VESA 50, 75, 100, 200, 400, 200 x 100,
300 x 200, 400 x 200, 400 x 300, and 600 x 400 mounting hole patterns in accordance with industry
standards set by the Video Electronics Standards Association.
Virtual Axis Technology: Once the TV
is secured to the wall, you can adjust the TV's angle. With
the Virtual Axis fingertip tilt system, the TV can tilt 12°
up or down, and you can lock
the position by simply tightening a knob on each monitor bracket.
Dimensions
Dimensions:
- Wall Plate:
W=29",
H=7", D=0.816"
-
Monitor Brackets:
L=18.5", W=1.682", D=2.287"
