Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Full-Motion Design: The Sanus Premium Series VSF409
full-motion, wall-mount bracket provides a 3-points of movement for an optimal
viewing position. The VSF409 extends from the wall (3.25"-9.5"), tilts up/down
(+/-15°), and swivels left or right (+/-90°) for easy viewing anywhere in the
TV Capacity: The Sanus Premium Series VSF409 wall-mount
bracket is designed to support flat-panel TVs from 13" to 39", weighing up to
VESA Bolt Pattern: The VSF409 full-motion, wall-mount
bracket accommodates a horizontal hole spacing on back of the TV of 75mm-200mm
and a vertical hole spacing of 75mm-200mm. The Sanus VSF409 comes with M4, M5,
M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It
will accommodate the following VESA hole patterns in accordance with industry
standards set by the Video Electronics Standards Association:
- 75mm x 75mm
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm
Note: Additional hardware may be required for your specific
model of TV. For example; shorter or longer screws, thicker or slimmer
washers or spacers. These additional accessories can often be found at your
local hardware store.
The wall plate must be mounted to a wall stud or
anchored to a brick, block, or concrete wall using the supplied lag bolts
Construction: The bracket is constructed of heavy-gauge
steel with a durable powder-coated black finish.
Cable Management: A small plastic cover and two wire ties provide
Installation Tools: The following tools are recommended for
mounting the VSF409:
- Tape measure
- Stud finder/level (included)
- 7/32 Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- TV Bracket:
- Width = 9.125"
- Height = 9.375"
- Depth = 2.75"
- Arm/Wall-Plate Assembly:
- Width = 2.375"
- Height = 6.8125"
- Depth = 7.4375"
- Width = 11.75"
- Height = 9.375"
- Depth = 3.25"-9.5"