About the Sanus VSF409
The Sanus Premium Series VSF409 provides flexible positioning for a smaller flat-panel TV. This full-motion bracket can support TVs with screen sizes from 15" to 39" and weighing up to 60 lbs. The arm swings out, extending your TV up to 9-1/4" out from the wall. The mount lets you swivel your TV from side to side, and you can also tilt it up or down for optimal viewing. The mount's hollow arm lets you thread cables through it, keeping them out of sight and free from tangles.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for TVs 15"-39"
- supports up to 60 lbs.
- pivoting arm positions TV up to 9-1/4" away from wall
- vertical tilt range: +15° to -15° (may vary with size of TV)
- swivel range: +15° to -15°
- in-arm wire channel conceals cables without inhibiting movement
- stud-mounting required
- 11-3/4"W x 9-13/16"H x 3-1/2"D (up to 9-1/4" with arm extended)
- warranty: 10 years
- MFR # VSF409-B1
What's in the box:
- TV bracket
- Arm assembly/wall-plate
- Four M4 x 12mm bolts
- Four M4 x 30mm bolts
- Four M6 x 12mm bolts
- Four M6 x20mm bolts
- Four M6 x 35mm bolts
- Four M8 x 12mm bolts
- Four M8 x 20mm bolts
- Four M8 x 35mm bolts
- Eight M4 washers
- 4 M6/M8 washers
- Four M4 spacers
- Four M6/M8 spacers
- Two 5/16" x 2-3/4" lag bolts
- 2 Lag bolt washers
- 2 Anchors
- 4 Covers
- Pivoting pin
- 1/4"-20 x 3-1/4" Mounting bolt
- Two 8-32 x 1/2" screws
- Large washer
- 2 Small washers
- Nut
- Thin spacer
- Magnetic stud finder/level
- Cable plate
- 2 Wire-ties
- 5/32 Hex key
- Wall-Mount Template
- Instruction Manual
- Online Product Registration
- Stud Finder/Level note
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for Sanus VSF409
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus VSF409
Features & specs
Features | ||
---|---|---|
Mount Type | Wall Mount | |
Motion | ||
Tilt | Yes | |
Swivel | Yes | |
Extend/Retract | Yes | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | Yes | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | Yes | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
- Sanus VisionMount® SF208
- Sanus Classic MMF10-B1
- Sanus VisionMount® SF213B
- Sanus Classic MSF07-B1
- Sanus VisionMount® SF203
Product Research
Features
Full-Motion Design: The Sanus Premium Series VSF409 full-motion, wall-mount bracket provides a 3-points of movement for an optimal viewing position. The VSF409 extends from the wall (3.25"-9.5"), tilts up/down (+/-15°), and swivels left or right (+/-90°) for easy viewing anywhere in the room.
TV Capacity: The Sanus Premium Series VSF409 wall-mount bracket is designed to support flat-panel TVs from 13" to 39", weighing up to 50 lbs.
VESA Bolt Pattern: The VSF409 full-motion, wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 75mm-200mm and a vertical hole spacing of 75mm-200mm. The Sanus VSF409 comes with M4, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 75mm x 75mm
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm
Construction: The bracket is constructed of heavy-gauge steel with a durable powder-coated black finish.
Cable Management: A small plastic cover and two wire ties provide cable management.
Installation Tools: The following tools are recommended for mounting the VSF409:
- Tape measure
- Stud finder/level (included)
- Drill
- 7/32 Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- Hammer
- Pencil
Dimensions:
- TV Bracket:
- Width = 9.125"
- Height = 9.375"
- Depth = 2.75"
- Arm/Wall-Plate Assembly:
- Width = 2.375"
- Height = 6.8125"
- Depth = 7.4375"
- Overall:
- Width = 11.75"
- Height = 9.375"
- Depth = 3.25"-9.5"
The Sanus VSF409 replaces these items
Sanus VisionMount® SF208
- for TVs up to 27" and 45 lbs.
- articulating arm positions TV up to 8" from wall
- tilt range: +15° to -15°;swivel range: 90° left to 90° right
Sanus Classic MMF10-B1
- for TVs up to 40" and 100 lbs.
- holds TV up to 9-3/4" from wall
- swivel range: 30° left and right; tilt range: +5° up and -15° down
Sanus VisionMount® SF213B
- for TVs up to 27" and 45 lbs.
- tilt range: +15° to -15°
- swivel range: 90° left to 90° right
Sanus Classic MSF07-B1
- for TVs up to 26" and 30 lbs.
- extending arm holds TV up to 7-5/16" from wall
- swivel range: 45° left and right; tilt range: +15° up to -15° down
Sanus VisionMount® SF203
- for TVs up to 27" and 50 lbs.
- holds TV 3" from wall
- tilt range: +15° to -15°; swivel range: 30° left to 30° right
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...
I needed a swivel arm wall mount for a tv in my bar area, and this Sanus is perfect. Very easy to install. It even came with a stud finder and level. Instructions are fool proof.
Greg from Allentown Pa