Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Fixed-Position: The Sanus Premium Series VSL4 fixed-position
wall-mount bracket is perfect for viewing your wall-mounted flat-panel TV at eye
level. It places your TV only 0.625" away from the wall.
TV Capacity: The Sanus Premium Series VSL4 wall-mount
bracket is designed to support flat-panel TVs from 13" to 39", weighing up to 50
VESA Bolt Pattern: The VSL4 wall-mount bracket accommodates
a horizontal hole spacing on back of the TV of 75mm-200mm and a vertical hole
spacing of 75mm-200mm. The Sanus VSL4 comes with M4, M5, M6, and M8 size bolts
of differing lengths to mount the bracket to your TV. It will accommodate the
following VESA hole patterns in accordance with industry standards set by the
Video Electronics Standards Association:
- 75mm x 75mm
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm
(included extension brackets must be used)
Note: Additional hardware may be required for your specific
model of TV. For example; shorter or longer screws, thicker or slimmer
washers or spacers. These additional accessories can often be found at your
local hardware store.
The wall plate must be mounted to a single wall stud
or anchored to a brick, block, or concrete wall using the supplied lag bolts
Construction: The VSL4 bracket is constructed of heavy-gauge
steel with a durable powder-coated black finish.
Safety Tab: Once the wall bracket is anchored to the wall
stud and the TV bracket is attached to the back of your television, the TV
bracket then hooks into the wall bracket. An integrated safety tab on the TV
bracket provides a safe and easy connection to the wall bracket you can hear.
Installation Tools: The following tools are recommended for
mounting the VSL4:
- Tape measure
- Stud finder/level (included)
- 7/32" Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- Wall Bracket:
- Width = 2.1875"
- Height = 6.0"
- Depth = 0.25"
- TV Bracket:
- Width = 10.0625"
- Height = 6.0625"
- Depth = 0.5625"
- 200mm Extension Brackets:
- Width = 1.0"
- Height = 8.875"
- Depth = 0.125"