About the Sanus VisionMount® VST15-B1
The Sanus VST15-B1 is a simple solution for wall-mounting your small flat-panel TV. Just mount the wall plate and slide the bracket onto its tabs. This sturdy mount can support a TV with a screen size of up to 26" and weighing up to 50 lbs. It holds your set less than two inches from the wall. Sanus' Virtual Axis technology lets you smoothly tilt the mount with just a touch of a finger, so you can make precise adjustments.
Easy setup
Mount the wall plate tabs. Then just lift the TV backet onto the tabs and secure in place. Once you're satisfied with the angle, set the safety latch to lock your TV into position and you're done.
Will this mount work with my TV?
Use the Sanus MountFinder to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for flat-panel LCD TVs 13"-26"
- accommodates VESA 200 x 100 and 100 x 100 hole patterns
- supports up to 50 lbs.
- holds TV 1-13/16" from wall
- mounting hardware included
- tilt range: +12° up to -12° down
- Virtual Axis allows smooth tilt motion with the touch of a finger
- stud-mounting required
- 8-11/16"W x 7-1/2"H x 1-13/16"W
- warranty: 10 years
- MFR # VST15-B1
What's in the box:
Sanus VisionMount® VST15-B1 owner's manual
- Wall plate
- TV bracket
- Two 1/4" x 2.5" mounting screws
- Four M4 x 12mm machine screws
- Four M4/M5 flat-washers
- Installation Instructions
Customer reviews for Sanus VisionMount® VST15-B1
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus VisionMount® VST15-B1
Features & specs
Features | ||
---|---|---|
Mount Type | Flat panel TV | |
Motion | ||
Tilt | No | |
Swivel | No | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | No | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | No | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Features
Overview: The Sanus VisionMount VST15 is a tilting wall mount for 13" to 26" flat-panel TVs and monitors. Sanus System's Virtual Axis tilting technology provides effortless adjustment of viewing angle without the use of tools, while a low-profile design positions the TV just 1.8125" from the wall for a flush appearance. To install, simply lift the TV bracket onto wall plate tabs and secure into place. The VST15 features a safety latch that locks the TV into place for added security. VESA 200 x 100 and 100 x 100 mounting patterns fit virtually any 13" to 26" LCD TVs up to 50 lbs.
VESA Mounting: This VESA TV bracket fits 200mm x 100mm and 100mm x 100mm hole patterns to fit most 13" to 26" TVs, up to 50 lbs. M4 (4mm) mounting hardware is included.
Virtual Axis: The Sanus VisionMount VST15 utilizes Virtual Axis technology to provide smooth tilt motion (+/-12°) with the touch of a finger.
Easy Installation: Once the wall-bracket is attached to your wall using the supplied mounting screws and your television installed to the TV bracket with the supplied machine screws, simply lift TV bracket onto wall-plate tabs and secure into place.
Safety Latch: The bracket's safety latch locks your TV into place for added security.
Installation Tools: The following tools are recommended for mounting the VST15:
- Stud finder
- Awl
- Level
- Phillips-head screwdriver
- Electric drill
- Drill bits: 1/8" (wood studs)
- Wrench or ratchet and socket: 1/2"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
This mount works great for my security system monitor on the wall. All cables are run through the wall and you can't see any of them. I mounted the monitor high on the wall and can tilt it down when needed.
Raymond from Hamilton, Oh