About the Sanus Premium Series VST4
The Sanus Premium Series VST4 tilt mount features fingertip control so you can easily adjust the tilt without tools. The mount can support TVs with screen sizes from 19” to 40” and weighing up to 50 lbs.
A safe design for mounting
Once you've secured the brace to the wall, the mount just slides into position. Safety locks that close with audible clicks let you know it's securely in place. The mount can be shifted slightly left or right on the wall plate so the TV is centered, even if your wall studs are off-center.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for TVs 19"-40"
- supports up to 50 lbs.
- vertical tilt range: +12° to -12°
- easy one finger tilt adjustment
- stud-mounting required
- mounting hardware included
- 8-3/4"W x 7-1/2"H x 1-3/4"D
- warranty: 10 years
- MFR # VST4-B1
What's in the box:
Sanus Premium Series VST4 owner's manual
- Wall plate
- TV bracket
- 2 Extension brackets
- Four M4 x 12mm bolts
- Four M4 x 30mm bolts
- Four M6 x 12mm bolts
- Four M6 x 20mm bolts
- Four M6 x 35mm bolts
- Four M8 x 12mm bolts
- Four M8 x 20mm bolts
- Four M8 x 35mm bolts
- Eight M4 washers
- Eight M6/M8 washers
- Two 1/4" x 2-1/2" lag bolts
- Four M6 x 12mm extension bolts
- 4 Hex-nuts
- Magnetic stud finder/level
- Wall-Mount Template
- Instruction Manual
- Online Product Registration
- Stud Finder/Level note
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for Sanus Premium Series VST4
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus Premium Series VST4
Features & specs
Features | ||
---|---|---|
Mount Type | Wall Mount | |
Motion | ||
Tilt | Yes | |
Swivel | No | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | Yes | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | Yes | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Features
Tilting Design: The Sanus Premium Series VST4 tilting mount gives you the best view of your wall-mounted television from the floor or couch. You'll be able to tilt your TV from -12° to + 12° in order to give you a better viewing angle of your wall-mounted TV; a tension knob tightens the bracket in place. Tilting the TV also provides easier access to cable connections on back of the television.
TV Capacity: The Sanus Premium Series VST4 wall-mount bracket is designed to support flat-panel TVs from 19" to 40", weighing up to 50 lbs.
VESA Bolt Pattern: The VST4 wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 75mm-200mm and a vertical hole spacing of 75mm-200mm. The Sanus VST4 comes with M4, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 75mm x 75mm
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm (included extension brackets must be used)
Construction: The VST4 bracket is constructed of heavy-gauge steel with a durable powder-coated black finish.
Safety Latch: Once the wall bracket is anchored to the wall stud and the TV bracket is attached to the back of your television, the TV bracket then hooks into the wall bracket. An integrated safety latch ensures a safe and secure fit.
Installation Tools: The following tools are recommended for mounting the VST4:
- Tape measure
- Stud finder/level (included)
- Drill
- 7/32" Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- Hammer
Dimensions:
- Wall Bracket:
- Width = 1.875"
- Height = 6.1875"
- Depth = 0.5"
- TV Bracket:
- Width = 8.6875"
- Height = 7.5625"
- Depth = 1.625"
- 200mm Extension Brackets:
- Width = 1.0"
- Height = 8.875"
- Depth = 0.125"
The Sanus Premium Series VST4 replaces these items
Sanus Classic MST15-B1
- for TVs up to 26" and 50 lbs.
- holds TV 2" from wall
- tilt range: +15° up to -15° down
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
What a GREAT product! It was easy to install with simple to understand instructions, plus I like the fact that you can adjust the tilt just by moving the television with a slight touch and it will stay where you place it.
Bill from Bloomington, Mn.