About the Sanus VXF220-B1 HDpro
The rugged Sanus VXF220-B1 HDpro lets you mount a weather-proof TV outdoors, like on your patio or deck. The mount's made of weather-resistant stainless steel. Part of Sanus' VisionMount HDpro™ series, this full-motion bracket can support TVs with screen sizes of 42" to 84" and weighing up to 175 lbs. Two articulated arms can extend your TV up to 20-1/2" out from the wall. The mount lets you swivel your TV from side to side up to 60°, and you can also tilt it for optimal viewing.
After installation, the mount's "level" adjustment lets you fine-tune your TV's position to ensure that the screen is perfectly level. The mount's hollow arm lets you thread cables through it, keeping them out of sight and free from tangles.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for flat-panel plasma and LCD TVs 42"-84"
- supports up to 175 lbs.
- weather-resistant stainless steel construction for outdoor installation
- TV mounting distance from wall: up to 28"
- vertical tilt range: +5° to -15° (may vary with size of TV)
- side-to-side swivel range: +30° to -30° (may vary with size of TV)
- level adjustment: +5° to -5°
- in-arm cable management
- stud-mounting required
- 31-1/8"W x 23-3/4"H x 3-3/8"D (20-1/2"D fully extended)
- warranty: 10 years
- MFR # VXF220-B1
What's in the box:
Sanus VXF220-B1 HDpro owner's manual
- TV bracket assembly
- Wall-mount bracket
- Articulating arm
- Four M4 x 20mm screws
- Four M4 x 30mm screws
- M4 x 40mm screws
- M5 x 20mm screws
- M5 x 30mm screws
- M5 x 40mm screws
- M6 x 25mm screws
- M6 x 40mm screws
- M8 x 25mm screws
- M8 x 45mm screws
- Four 4mm spacers
- Four 7mm spacers
- Four 14mm spacers
- Four 24mm spacers
- Four M4/M5 washers
- Four M6/M8 washers
- Five 5/16"x3-1/2" lag bolts
- Five wall-anchors
- Five 5/16" washers
- 4 Inserts
- 10-32mm x 1/4" Screw
- Four 5/16"-18 x 1" screws
- 1/4" Hex-key
- 5/32" Hex-key
- Instruction Manual
Customer reviews for Sanus VXF220-B1 HDpro
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus VXF220-B1 HDpro
Features & specs
Features | ||
---|---|---|
Mount Type | Full-motion | |
Motion | ||
Tilt | No | |
Swivel | No | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | No | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | No | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized |
Product Research
Features
All-Weather TV Wall Mount: The Sanus HDpro Series VXF220 is an all-weather wall mount that features a rust-resistant coating and stainless steel hardware that stands up to the elements, making this mount an ideal choice for indoor or outdoor use. It also features a pre-assembled interface and strong, ultra-light extruded aluminum wall plate for the quickest, easiest installation possible.
Capacity: The SANUS HDpro Series VXF220 fits TVs from 42" to 84" (weight up to 175lbs).
Bolt Pattern: The monitor bracket has multiple vertical slots and can accommodate vertical hole spacing (on the back of the TV) from 1.968" (50mm) up to 22.047" (560mm). The unit can expand horizontally for larger TVs. The vertical brackets can slide along the horizontal bars, accommodating a horizontal hole spacing from 5.314" (135mm) to nearly 36.929" (938mm). The VXF220 comes with M4, M5, M6, and M8 size bolts of differing lengths to mount the brackets to your TV. Given the mounting bracket's range of motion, it will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- VESA 800 x 500
- VESA 800 x 400
- VESA 600 x 400
- VESA 400 x 400
- VESA 400 x 300
- VESA 400 x 200
- VESA 300 x 300
- VESA 300 x 200
- VESA 200 x 200
- VESA 200 x 100
QuickConnect: The QuickConnect system makes it easy to attach your TV to the mount's arm assembly and lock it in place in one easy movement. Simply insert the locking tab on the monitor plate into the opening on the arm assembly and let it slide downward into place. An audible click will let you know the parts are correctly assembled. To remove your TV, just push in on the locking tab to disengage it from the are assembly.
ProSet: Once installed, your TV or wall-mounted furniture may not appear completely level with its surroundings. ProSet technology lets you make micro-adjustments to height and level (+/-5°) after mounting to ensure perfect positioning. The VXF220 arm assembly shifts left and right on the wall plate for easy TV centering, even with off-center wall studs.
Full-Motion: It's strong dual arms allow even the largest TVs to retract and extend (3.4375" to 20.5") from the wall with ease. It also tilts (5°/-15°), swivels (+/-30°), and pans (+/-180°).
Virtual Axis Tilting Technology: This exclusive patented technology allows smooth, easy tilting motion by balancing the weight of the TV on itself. You are able to tilt your TV up or down with just the touch of a finger (not tools are required to adjust the viewing angle). This helps to easily reduce glare and reflections caused by lights or windows.
FollowThru In-Arm Cable Channel: This innovative in-arm cable channel protects and conceals cables the entire length of the extension arm without inhibiting movement, even through the elbow. This exclusive design allows mount to extend, retract, and pan with the easiest, most fluid motion possible. An adjustable tension rig lets you find and keep the perfect position for you TV.
Wall Mounting: The bracket should be mounted to a wood wall stud, solid concrete, or concrete block using the supplied wall-mount lag screws. Required tools include:
- Stud finder
- Level
- Awl
- Phillips-head screwdriver
- Ratchet with 1/2" sockets (or 1/2" box wrench)
- Drill with 7/32" bit for wood stud installations (or 3/8" for masonry)
- Hammer
- Tape measure (ruler)
Dimensions:
- Wall Plate: 31.125" (w) x 19.1875" (h) x 1.375"
- TV Bracket: 22.75"-38.5" (w) x 23.75" x 1.6875"
- Articulating Arm: extends 3.4375" to 20.5" from wall
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Easy to install. Came with multiple combinations of screws and spacers to accommodate just about any circumstance. Directions were easy to follow. Material construction is excellent quality. TV articulates with little to no effort after install.
DrJ from Scottsdale, AZ