Chat
Contact us
Close contact box
Connect ID #
252 558 897 4
Connect ID #
252 558 897 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Sanus WSS1 Stand for Sonos Play:1 or Play:3 speaker (Black)

Item # 051WSS1B

The Sanus WWS1 speaker stand was designed for a Sonos Play:1 or Play:3 speaker.

The Sanus WWS1 speaker stand was designed for a Sonos Play:1 or Play:3 speaker.

3 questions - 11 answers

Item # 051WSS1B

Shop all Sanus Speaker Stands

About the Sanus WSS1

Ralph Graves
The Sanus WWS1 speaker stand was designed for a Sonos Play:1 or Play:3 speaker. It comes with three different brackets. One for a Play:1 speaker, and two for the Play:3, so you can mount it in either a horizontal or vertical position.

The Sanus WWS1 speaker stand was designed for a Sonos Play:1 or Play:3 speaker. It comes with three different brackets. One for a Play:1 speaker, and two for the Play:3, so you can mount it in either a horizontal or vertical position.

The stand's hollow post lets you run cables through it, preserving a clean, uncluttered appearance. And the base comes with both rubber isolation pads for hardwood floors and carpet spikes to ensure the stand sits stably on a carpet or rug.

READ LESS

Product highlights:

  • for Sonos Play:1 and Play:3 speakers
  • Play:3 speaker can be oriented horizontally or vertically
  • hollow stand column for cables
  • stand height: 34"
  • base plate measures 10" x 13"
  • carpet spikes to help minimize vibrations on floor coverings
  • rubber isolation pads to help minimize vibrations on hardwood floors
  • not compatible with the Sonos One powered speaker
  • warranty: 60 days
  • MFR # WSS1-B1

What's in the box:

  • Upright tube
  • Base
  • Play:1 bracket
  • Play:3 vertical bracket
  • Play:3 horizontal bracket
  • Top collar
  • Bottom collar
  • 1/4"-20 x 3/4" Screw
  • 1/4"-20 x 5/8" screw
  • 1/4"-20 x 3/8" screw
  • Lock washer
  • 4 Rubber isolation pads
  • 4 Carpet spikes
  • 4 Hex-nuts (for spikes)
  • Felt pad
  • Instruction Manual

Customer reviews for Sanus WSS1

Loading reviews...

Average review:

5.0 out of 5 stars
19 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Sanus WSS1

Russ B.

Features & specs

Number of Stands Included 1
Stand Type N/A
Compatibility Sono Play 1/Play3
Height 34
Weight Capacity 5.8
Base Dimensions 12.75 x 10
Top Plate Dimensions See More Info
Materials Metal
Adjustable No
Wire Management Yes
Fillable No

Product Research

Features

Compatibility: The Sanus WSS1-B1 speaker stand is designed to work with both the Sonos Play:1 and Play:3 speakers (sold separately). The stand positions the Sonos speakers at the speaker manufacturer's recommended angle for accurate dispersion and securely support the speaker for optimum bass response.

Horizontal or Vertical Mounting: The Sanus WSS1-B1 speaker stand mounts the Sonos Play:1 speaker vertically. It can mount the Sonos Play:3 speaker either vertically or horizontally. The WSS-B1 comes with three different mounting plates based on the the type of Sonos speaker and the orientation you will be mounting the speaker.

  • Sonos Play:1 Bracket: measures 2.625" (w) x 2.6875" (h) x 3.75" (d)
  • Sonos Play:3 Vertical Bracket: measures 3.375" (w) x 2.8125" (h) x 4.25" (d)
  • Sonos Play:3 Horizontal Bracket: measures 4.0625" (w) x 2.625" (h) x 4.5" (d)
Note: These brackets mount to the stand's post using a 1/4"-20 x 5/8" screw and then to your Sonos speaker using a 1/4"-20 x 3/8" screw. A felt pad is placed between the bracket and the bottom the Sonos speaker.

Wire Management: The speaker stand's column and base have wire channels to conceal cables. The wire channels are large enough to route and conceal your Sonos speaker's power and Ethernet cables.

Rubber or Spike Feet: The Sanus WSS1-B1 speaker stand comes with both rubber and spike feet to accommodate different flooring. The rubber feet should be used on hardwood, laminate, and tile flooring. The spike feet should be used on carpeted flooring. Both types of feet screw into the bottom of the stand's base.

Note: The rubber feet add approximately 0.25" to the overall height of the stand. The spike feet add approximately 0.375" to the overall height of the stand.

Tools Required: All you'll need is a phillips-head screwdriver to assemble the speaker stand and to mount your Sonos speaker to the stand.

Loading accessories...

Customer Q&A

3 questions already asked

Q
Is this steel?
bob  Nov 25, 2015
1 answer
A
Yes. But not to heavy. I bought them for the sonos play 3 speakers. They work perfect, price was right. I would highly recommend these speaker stands.
gary  Nov 26, 2015
Q
how tall is the speaker stand?
kevin  Aug 04, 2016
4 answers
A
34.5 inches. From floor to speaker mount. Love them!
gary  Aug 05, 2016
A
34", as it says on the product page
marc  Aug 05, 2016
A
35" w/o speaker
thomas  Aug 05, 2016
A
With Sonos 1 attached on top it's approximately 40.75"
richard p  Aug 05, 2016
Q
Photos look like there are 2 plugs. One is a standard 2 prong electrical end. What is the other end? Do you need it?
ggreen  Dec 24, 2015
6 answers
A
Unsure of the question. The stands do not contain any plugs. If you are refering to the Sonos 1, there is one connection for electrical and one for a hardwired network connection (RJ-45). Sonos 1's are not included with this product..
av by design,  Dec 28, 2015
A
There are no power cords with this strand . Your sonos speaker has 1 power cord which runs thought the stand
gary  Dec 27, 2015
A
The other is an Ethernet socket. You only need it if you use your speaker as the bridge.
oren  Dec 26, 2015
A
For the Sonos speakers, only one cord is necessary if you are using WIFI. The power cord is all that's necessary. There is a spot for an Ethernet cord, but really not necessary.
tracy  Dec 26, 2015
A
there is one power cord from the speaker that is fed through the tube and out the bottom.... the other wire with plug is only if you want to Hard Wire the speakers .... if you are using the wireless connection to surround sound then there will only be the one speaker wire connected to your nearest electrical outlet. i have 2 stands both behind the couch ... the stands are great... heavy and great. any more questions let me know ... - rob
robert f  Dec 26, 2015
A
There are no cables included. The picture is just for reference only to show how you can run power and Ethernet cables through the stand.
kenneth  Dec 26, 2015 (Staff)

Loading articles...

Compare the sound