About the Boston Acoustics NEO Type-M SE
Does your vehicle's sound system suffers from muddy highs? These NEO Type-M SE tweeters from Boston Acoustics will help add some sparkle, with 1" alloy domes that really deliver all the high-frequency details. Properly placed and tuned, these tweeters will improve your stereo imaging and raise the soundstage in your vehicle up to ear level.
Bring on the detail
Does your vehicle's sound system suffers from muddy highs? These NEO Type-M SE tweeters from Boston Acoustics will help add some sparkle, with 1" alloy domes that really deliver all the high-frequency details. Properly placed and tuned, these tweeters will improve your stereo imaging and raise the soundstage in your vehicle up to ear level.
Multiple mounting options
The NEO Type-M SE tweeters come with multiple options for flush- or surface-mounting. Their quick-fit mounting cup makes installing the tweeters even easier by making all connections to the tweeter when it's placed in the cup. Boston includes external crossovers that can be docked together or separated, depending on your installation. These tweeters will handle up to 50 watts RMS.
Product highlights:
- 1" anodized alloy dome tweeter
- flush- and surface-mount hardware included
- external crossovers
- power handling: 2-50 watts RMS (100 watts peak power)
- frequency response: 3,000-22,000 Hz
- sensitivity: 90 dB
- top-mount depth: 7/8"
- warranty: 1 year
- MFR # NEO TM SE
What's in the box:
Boston Acoustics NEO Type-M SE owner's manual
- 2 Tweeters
- 2 Tweeter crossovers
- 2 Tweeter grilles
- Two 5' lengths of speaker wire (each with female quick slides on one end and male quick slides on the other)
- 2 Flush mount housings
- Two 2-piece angled surface mount housings
- Eight 1" Self-tapping screws
- Four 1/2" Self-tapping screws
- Two 3/8" Tweeter housing screws
- Two 2-piece metal tweeter spring mounting clips
- 2.5mm Allen wrench
- Installation Instructions
- Warranty information
- Product Registration card
- Crossover note
Customer reviews for Boston Acoustics NEO Type-M SE
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Boston Acoustics NEO Type-M SE
Features & specs
| General | ||
|---|---|---|
| Speaker Size | ||
| Design | 1-way | |
| Tweeter Design | 1" Dome | |
| Impedance (Ohms) | 8 | |
| Tweeter Composition | Alloy | |
| Woofer Composition | --- | |
| Woofer Surround | --- | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | 90 | |
| Sensitivity at 2.83 volts | N/A | |
| Frequency Response | 3000 - 22k Hz | |
| Minimum RMS Wattage | 2 | |
| Maximum RMS Wattage | 50 | |
| Peak Power Handling (Watts) | 100 | |
| Top-mount Depth (Inches) | 0 7/8 | |
| Bottom-mount Depth (Inches) | N/A | |
| Cutout Diameter or Length (inches) | 1 3/4 | |
| Mounting Height (Inches) | 0.4 | |
| Frame Width | 2.034 | |
| Frame Length | 2.034 | |
Product Research
Features
Tweeters: The Neo Type-M SE Imaging System tweeters are 1" Type M-1 anodized alloy domes with AMD (Amplitude Modification Device) for a smooth high frequency response and linearity. AMD is a patented acoustical tuning device that uses precisely sized hollow tubes positioned in front of the tweeter to refocus short wavelength energy and create an extremely smooth, flat response. This is done without using elaborate electronic components that can degrade the sound's purity. The supplied Quick-fit mounting cup simplifies tweeter installation.
Mounting Options: The tweeter can be flush mounted or surface mounted (at approximately 45°).
Mounting Dimensions:
| Flush Mount | Angled Surface Mount | |
|---|---|---|
| Mounting Height | 0.4" | 1.5" |
| Depth | 0.845" | 0.428" (screw depth) |
| Frame Diameter | 2.034" | N/A |
| Cutout Diameter | 1.718" | N/A |
| Frame Width | N/A | 1.878" |
| Frame Length | N/A | 1.746" |
Crossovers: The crossovers' inputs and outputs are set screw terminals and will accept bare wire up to 14 gauge. A set of outputs (unaffected by the crossover) is shorted to the inputs, making it easy to add the tweeters to existing speaker wire.
Tweeter Attenuation: A jumper on each crossover allows you to adjust the tweeter output; select un-attenuated tweeter output (0dB attenuation) or an attenuated output of -3 dB, -6 dB, or -9 dB.
Imaging Mode: Another jumper on each crossover changes the imaging mode. In SQ mode the crossover point is 8 kHz; in SPL mode the crossover point is 3 kHz.
Crossover Dimensions:
- Length: 6.458"
- Height: 1.553"
- Width: 1.942"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
