Boston Acoustics NEO Type-M SE
1" alloy dome tweeters
Item #: 065NEOTMSE
This item is no longer available.
Original Price: $129.99 pair
Bring on the detail
Does your vehicle's sound system suffers from muddy highs? These NEO Type-M SE tweeters from Boston Acoustics will help add some sparkle, with 1" alloy domes that really deliver all the high-frequency details. Properly placed and tuned, these tweeters will improve your stereo imaging and raise the soundstage in your vehicle up to ear level.
Multiple mounting options
The NEO Type-M SE tweeters come with multiple options for flush- or surface-mounting. Their quick-fit mounting cup makes installing the tweeters even easier by making all connections to the tweeter when it's placed in the cup. Boston includes external crossovers that can be docked together or separated, depending on your installation. These tweeters will handle up to 50 watts RMS.
- 1" anodized alloy dome tweeter
- flush- and surface-mount hardware included
- external crossovers
- power handling: 2-50 watts RMS (100 watts peak power)
- frequency response: 3,000-22,000 Hz
- sensitivity: 90 dB
- top-mount depth: 7/8"
- warranty: 1 year
- Our 60-day money-back guarantee
Boston Acoustics NEO Type-M SE Reviews
Average Customer Review:
Crutchfield Customer Review (What's this?)
I replaced a set of the Boston ISTS imaging tweeters with these for no other reason than just to have matching tweeters for my Boston Pro SE Component set. I thought the ISTS series tweeters sounded great, as evidenced by my review on them. I used these in the stock dash locations on a 2010 Dodge Ram Pick-up truck, and gave them 50 watts. Wow, there was definitely an improvement over the ISTS series, as those were little harsher. The ISTS sounded great in the system, but the NEO's take the cake. The crossover is huge, has a tweeter protection circuit (light bulb in the crossover for over power), and is adjustable in two ways....There is a jumper selection for SPL setting (3,000hz crossover point) and Imaging (8,000hz crossover point). There is also a second jumper on each crossover for attenuation (0db, -3db, -6db, -9db). Additionally, there is a set of outputs on the crossovers for daisy-chaining speakers. I am very pleased with these as they have brightened my front sound stage more so than the ISTS series. I would recommend the ISTS to anyone with an entry level to mid-level system. However, if you have a more complex or higher level, definitely get these!
Pros: Tweeter protection circuit, crossover options, clarity!
Cons: Enormous Crossover for a small tweeter!!!
What's in the box?
- 2 Tweeters
- 2 Tweeter crossovers
- 2 Tweeter grilles
- Two 5' lengths of speaker wire (each with female quick slides on one end and male quick slides on the other)
- 2 Flush mount housings
- Two 2-piece angled surface mount housings
- Eight 1" Self-tapping screws
- Four 1/2" Self-tapping screws
- Two 3/8" Tweeter housing screws
- Two 2-piece metal tweeter spring mounting clips
- 2.5mm Allen wrench
- Installation Instructions
- Warranty information
- Product Registration card
- Crossover note
Features and Specs
|Tweeter Design||1" Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Frequency Response||3000 - 22k Hz|
|High-Pass Crossover Frequency||---|
|RMS Power Range (Watts)||2-50|
|Peak Power Handling (Watts)||100|
|Top-mount Depth (Inches)||7/8|
|Cutout Diameter or Length (inches)||1 3/4|
Tweeters: The Neo Type-M SE Imaging System tweeters are 1" Type M-1 anodized alloy domes with AMD (Amplitude Modification Device) for a smooth high frequency response and linearity. AMD is a patented acoustical tuning device that uses precisely sized hollow tubes positioned in front of the tweeter to refocus short wavelength energy and create an extremely smooth, flat response. This is done without using elaborate electronic components that can degrade the sound's purity. The supplied Quick-fit mounting cup simplifies tweeter installation.
Mounting Options: The tweeter can be flush mounted or surface mounted (at approximately 45°).
|Flush Mount||Angled Surface Mount|
|Depth||0.845"||0.428" (screw depth)|
Crossovers: The crossovers' inputs and outputs are set screw terminals and will accept bare wire up to 14 gauge. A set of outputs (unaffected by the crossover) is shorted to the inputs, making it easy to add the tweeters to existing speaker wire.
Tweeter Attenuation: A jumper on each crossover allows you to adjust the tweeter output; select un-attenuated tweeter output (0dB attenuation) or an attenuated output of -3 dB, -6 dB, or -9 dB.
Imaging Mode: Another jumper on each crossover changes the imaging mode. In SQ mode the crossover point is 8 kHz; in SPL mode the crossover point is 3 kHz.
- Length: 6.458"
- Height: 1.553"
- Width: 1.942"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.