Boston Acoustics designed the PRO60 SE component speaker system to bring high fidelity sound into your mobile environment. The package combines two 6-3/4" woofers, a pair of 1" dome tweeters, and a set of sophisticated crossover networks to deliver superior reproduction of everything from light classical to the heaviest rock.

Accurate, powerful bass
A rigid cast-aluminum frame supports the tough copolymer woofer cone so that no extraneous vibrations interfere with the clean reproduction of your music. The woofer's lightweight neodymium magnet and large voice coil help transfer electrical energy into sound efficiently and precisely. Boston's proprietary heatsinks and air vents keep the speaker's inner workings running cool, ensuring dependable and long-term play. The included adapter brackets let you install the woofers in 6-1/2" or 5"x7" factory openings.

Superb high-frequency response
The 1" dome tweeter, made of a lightweight metallic alloy, produces crisp, detailed high notes without being harsh. For best results, you should mount the component tweeters separately so they'll broadcast the high frequencies more directly to your ears. If that's not an option in your vehicle, a unique design lets you install these tweeters in the woofer cones, so they'll mount in your vehicle's factory speaker locations.

Excellent balance
The crossovers use separate high- and low-pass filters to assign the appropriate frequencies to the woofers and tweeters in the proper balance. You can adjust the tweeter level to improve high-frequency balance, and also to compensate for a tweeter that's been axis-mounted on the woofer. The crossovers can be docked together to provide another convenient installation option.

Important Note: These Boston Acoustics speakers use a low impedance design to pull more power safely from your car stereo or amplifier. This design is compatible with virtually all factory and aftermarket stereos.

Note: Boston describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake we list it as a 6-3/4" speaker.

Product Highlights:

  • component speaker system includes two woofers, two tweeters, two external crossovers
  • 6-3/4" copolymer woofer with rubber surround and cast aluminum basket
  • 1" Type-M1 anodized alloy dome tweeter with axis-, flush-, and surface-mount options
  • dockable crossover with bi-wire and bi-amp options
  • also fits 6-1/2" and 5"x7" openings (use supplied adapter brackets and redrill screw holes)
  • grilles included
  • power range: 2-125 watts RMS (250 watts peak power)
  • frequency response: 50-22,000 Hz
  • sensitivity: 90 dB
  • top-mount depth: 2-3/8"
  • warranty: 2 years
  • Our 60-day money-back guarantee

Why install component speakers?

A component speaker system gives you the best possible performance from your car audio system. A system consists of separate woofers, tweeters, and crossovers, each designed to cover one specific range of frequencies. As separate components, the woofer can move freely to deliver more powerful performance, while the tweeter can be custom-mounted in a better spot up closer to your ears, revealing a whole new world of detail. Separate crossovers are far superior to the simple filters wired into full-range speakers, so the components work together for smoother, more focused sound.

Hands-on research

What's in the box?

Download owner's manual

  • 2 Woofers
  • 2 Tweeters (installed in axis mount)
  • 2 Tweeter axis mounts (installed)
  • 4 Axis mount bolts (installed)
  • 2 Woofer crossovers
  • 2 Tweeter crossovers
  • 2 Woofer grilles
  • 2 Woofer grille frames
  • 2 Tweeter grilles
  • 4 Woofer gaskets
  • Two 5' lengths of tweeter speaker wire (each with gold-plated 0.11" male quick slides on one end and 0.11" female quick slides on the other end)
  • 2 Flush mount tweeter cups
  • 2 Angle mount tweeter bases (bottom sections)
  • 2 Angle mount tweeter housings (top sections)
  • Two metal 6-3/4" rings (converts ear tabs to full flange)
  • Two metal 6-3/4" multi-hole adapter rings
  • Two metal 5"x7" adapters
  • Two 1/2" Spacer rings (convert to 6-1/2" opening)
  • Four 1" Self-tapping screws
  • Four 1/2" Self-tapping screws for securing tweeter mounts
  • Two 3/8" Self-tapping screws
  • Two 2-piece metal tweeter spring mounting clips
  • 3/32" Hex bit for Allen-head screws
  • Sixteen 1-1/8" Self-tapping Allen-head screws
  • Six 1/4" Allen-head machine screws (8-32)
  • Six 11/16" Allen-head machine screws (8-32)
  • 8 Flat washers
  • 4 Insulated female quick slides (2 x 0.205" and 2 x 0.11")
  • Woofer hardware bag contents list
  • 2.5mm Hex key (with plastic handle)
  • Installation Instructions
  • Tweeter removal instructions
  • Warranty information
  • Product Registration card

Product Research

Features
Fit Notes

Features

Woofer: The PRO60SE component system includes copolymer woofers with rubber surrounds. Each woofer has a 1-1/2" diameter voice coil and a neodymium magnet which has a high power-to-weight ratio and a compact size; about one-tenth the size of traditional iron-ferrite magnets. The speaker features a cast-aluminum basket, Radiavent cooling, and an integrated Twinstage aluminum heat sink to draw heat away from the voice coil, increasing the power handling capacity.

Tweeter: The PRO60SE includes 1" Type M-1 anodized alloy dome tweeters with AMD (Amplitude Modification Device) for a smooth high frequency response and linearity. AMD is a patented acoustical tuning device that uses precisely sized hollow tubes positioned in front of the tweeter to refocus short wavelength energy and create an extremely smooth, flat response. This is done without using elaborate electronic components that can degrade the sound's purity. The supplied Quick-fit mounting cup simplifies tweeter installation. The tweeters come mounted to the woofer using the axis-mount bracket; they can be removed and with the supplied brackets be flush-mounted or surface-mounted at an angle.

Tweeter Dimensions:

  Frame Diameter Cutout Diameter Mounting Height Mounting Depth
Flush Mount 2.040" 1.718" 0.377" 0.981"
Angled Surface Mount 1.870" Screw holes only 1.502" Screw depth only

Note: See Fit Notes below for PRO60SE dimensions when configured as a coaxial speaker.

Crossovers: The PRO60SE system comes with separate woofer and tweeter crossovers for each channel. Each crossover can be mounted separately, docked in pairs, or all four crossovers docked together and mounted as one unit. The crossover inputs and outputs are set screw terminals and will accept bare wire up to 10 gauge. The following crossover adjustments can be made:

  • Tweeter Attenuation: On the tweeter crossovers, you can adjust the tweeter output by placing the supplied jumper on the appropriate terminals; select an un-attenuated tweeter output (0dB attenuation) or an attenuated output of -2dB or -4dB. The factory setting is -2dB.
  • Axis/Component Configuration: On the woofer crossovers you can set the output for axis mount or component configuration. If the tweeter is mounted to the woofer using the axis mount bracket, the jumper should be placed on the Axis terminals (factory position). If the tweeter is removed from the woofer and mounted separately in the flush-mount or angled surface-mount cups, the jumper should be placed on the component terminals.
  • Input Configurations:
    • Separate Inputs: Each crossover (woofer and tweeter) has independent inputs, allowing you bi-amp (separately powering the woofer and tweeter with different amplifier channels) or bi-wire (powering the woofer and tweeter with separate wires from the same amplifier channels) the system. The supplied signal bridge, which shorts the woofer and tweeter inputs together, is removed to bi-amp or bi-wire.
    • Single Input: When powering the component system with a single full-range input, you will need to connect the woofer and tweeter crossover inputs together. This can be accomplished using the supplied signal bridge when the woofer and tweeter crossovers are mounted together.
    • Daisy Chain: When not mounted together, the woofer and tweeter crossovers can be daisy-chained together. The signal output from the amplifier is connected to one of the crossover's inputs; the signal output from that crossover is then wired to the other crossover's input.

      Note: No crossover frequency or slope information was provided by the manufacturer.

Crossover Dimensions:

  • Length: 6.476"
  • Height: 1.560"
  • Width:
    • Individual: 1.961"
    • Pair: 3.789"
    • All four: 7.405"

Fit Notes

PRO60SE Coaxial Mounting: When the tweeters are mounted on the axis mount, the PRO60SEs have the following dimensions:

Speaker Size Mounting Depth
(Top Mount)
Mounting Height Flange Height Cutout Diameter Frame Diameter
6-1/2" 2.030" 1.570" 1.375" 4.922" 5.779"
6-3/4" 2.379" 1.221" 0.957" 5.217" 6.536"
5x7/6x8 2.333" 1.267" 0.947" 5.302" 5.82" x 8.03"
5-1/4" 2.230" 1.098" 0.896" 4.650" 5.479"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Boston Acoustics Pro60 SE Reviews

Average Customer Review:

13 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Boston Acoustics Pro60 SE

Written By Anonymous, Chula vista, CA on Monday, April 08, 2013

Crutchfield Customer Review (What's this?)

Love this set of speaker they sound very clean

boston pro 60

Written By danb, 22015 on Thursday, December 27, 2012

Crutchfield Customer Review (What's this?)

2nd set of these and just love the clarity. Sending 150watts a side via a jl audio 600/4. Stellar performance for the money. And $200 off each set makes the decision easy

Pros: Everything

Cons: None

Update from previous review!!!! BA Pro 60SE's

Written By Marc D, Brevad County, FL on Tuesday, April 17, 2012

I thought I would add this update on this component set to give people a fair assessment. I originally had (2) two channel amps feeding 70w to the woofers, and splitting 70 w to tweeters shared with the Boston ISTS imaging tweeters. The component set itself was seeing approximately 105 w. This set up sounded great, and was crystal clear as my previous post said. However, at higher listen levels, I could hear distortion. I read online where people were running double the power I was running to them with no problems, and suggested this set was power hungry. So I took the plunge, and purchased a refurbished Rockford Fosgate Power T600-4 100x4 at 4 ohms (from Crutchfield). Well that amp has totally changed the sound of this set up. I said before I wasn't sure how the set could sound better. Well, the answer to that question is power. My front sound stage has completely come alive with power. The set is seeing approximately 150 w each side, and the difference is just tremendous. I feel like the set could easily use another 25 - 50 w a side, but that would be complete overkill, and too loud to bare. Don't even think about sending less than rms wattage to these puppies, or you are just wasting valuable sound. Try the SR's 60's (wife loves hers at 62.5w x 4 bi-amped) if you don't have the 125 watts x 2 available. Mine are bi-amped with the woofers now at 100w x2, and 2 sets of tweeters now at 100w x2 (50w a set). Amazing difference more power makes! Honest review!

Pros: Well, after the wattage increase, I don't even know what to say...Phenomenal sound! Tweeters require a fair amount of tuning or they get bright (some call it harsh) very quickly. Excellent mid-bass. Just Wow!!!

Cons: Nothing musically.....Knit picking would be the large crossovers, and high price when not on sale. And as stated before, the instructions leave much to be desired on wiring options and impedance changes with the different wiring options.

Boston Acoustics Pro60 SE

Written By Brian, Boston,MA on Monday, April 16, 2012

Crutchfield Customer Review (What's this?)

great speakers and sound but not worth that kind of money. was hoping to get alittle bit of bass out of these but nothing.

Cons: harness doesnt work

Boston Acoustics Pro60 SE

Written By David, W Springfield, MA on Tuesday, February 07, 2012

Crutchfield Customer Review (What's this?)

I had high expectations; but these speakers exceeded them. They sounded nice with 18 watts rms, but 125 watts really woke them up. I would suggest that a good powerful amp is necessary.

The tweeters are very impressive; but the amount of bass the woofers can put out is fantastic ( in a large van). Great transient response, great dynamic range. Great speakers.

Pros: Performance.

Cons: Large investment.

Just Bananas!

Written By Marc D, Brevard County, FL on Thursday, January 12, 2012

Well, where should I start. I decided I wanted a sound quality set up this time around instead of just bass, so i purchased these while they were on sale for $399.00. Finally got them installed and I am amazed. Its not even close when comparing these to the two previous comp sets I had (Infinity ref 6.5s and Jbl comps). The pro 60se's have the ability to be bi-amped so that's what I did. 70x2 arc audio 125.2 amp to the woofers, and 70x2 arc audio amp to the tweeters (two sets of tweeters, one from pros, one set of the Ists BA imaging tweeters). All I can say is I was not disappointed. Seriously, my vocals are crystal clear, and mid bass is punchy. The sound is unbelievable. Look no further than these. I don't see how you could honestly get much better sound from speakers. Of course your amps have to be tuned right, but once they are, game over!

Pros: Hmmmmmm! I gonna have to go with crystal clear sound when amped and tuned properly, and the different wiring options for the crossovers.

Cons: Other than the high price, the installation instructions are not clear on the difference between the wiring options for the crossovers and speakers! It does not indicate the impedance changes with wiring options, or the pros or cons of either way.

Boston Acoustics Pro60 SE

Written By Anonymous, on Tuesday, October 25, 2011

Crutchfield Customer Review (What's this?)

Exceptional speakers

Written By Russell, California on Friday, September 09, 2011

When I was shopping around for a set of component speakers to install in my 2000 Toyota Tacoma Xtra Cab, I settled between the Polk Audio Mobile Monitor 6.5 component set and this set of components. In my last car I used a set of Rockford Fosgate 5-1/4" components and 6x9 coaxials. These Boston Acoustics Pro60SE components blow anything I've ever heard out of the water.

I ran two pairs of these components in my truck off of a JVC head unit before purchasing and installing an Alpine PDX-5 amp with a pair of Polk Audio MM840 subwoofers. When these components were driven by the dash receiver, they sounded positively amazing. They were so clear and they had impressive bass response for 6.5" speakers. I set the tweeters to the -4db attenuation jumper position because they were a tad too bright for me. After setting the jumper, the tweeters were softened a little and just right.

Once I completed the system with a PDX-5 amp and Polk Audio subs, these speakers REALLY started to shine! At high volume, these speakers do not show any sign of distortion. They are crystal clear and they handle power very well. I can ear every nuance of my music with these wonderful speakers and I believe this is the best speaker related purchase I have ever made.

I would highly recommend these speakers to anyone who has the budget for them and who wants great and clear sound.

You get what you pay for

Written By NY Medic, Woodmere NY on Monday, October 25, 2010

Well all you need to know is that they just sound amazing. If money is not an
issue then this is the way to go.

Exceptional Sound

Written By Kirk, Albuquerque, NM on Monday, April 13, 2009

These speakers sound incredible. They have very detailed and articulate sound. Just like the overview says, set them up as components if you can. Tweeter level adjustments keep your highs how you like, smooth or bright. They play clean and very loud. They are efficient, but I would recommend getting them at least 100 watts of power per channel. You'll be rewarded with great sound with all types of music if you install them nicely. They hold their own if you plan to use them alone. However, if you want more bass add a subwoofer. I would definitely purchase these again and recommend them.

UNTOUCHABLE

Written By Robert, MIAMI, FL on Saturday, March 28, 2009

I went from the old school components I had for 7 years to these. The speakers were extraordinary in their own right. They were unfortunately retired due to auto accident. So I searched for a replacement that could be in the same league. I was told to use these BA speakers and I have to say I will never look back.

Sound is unparalleled in comparison to pretty much any other component system I have heard. They have good bass response for 6 1/2" woofer. I have thrown everything at them as far as genre and they don't hesitate to reproduce it perfectly. Classical, Opera, Classic Rock, Metal, Hip/Hop & R&B.

I have these powered by a kicker 350.4 teamed with the Kappa 462.9cfp's in rear pillars. Kenwood KVT 819 DVD, 3 farad Capacitor, Kicker 750.1 sub amp, 4 Kicker 10" cvt's. Squeezed into a regular cab Silverado. It's sounds like I am the studio. I could not possibly ask for better sound. IT is loud, clear, extremely accurate.

In closing if you have the budget for these speakers then there is nothing further to discuss.

EAR BLEEDING SUPER CLEAN SOUND

Written By Rehn, MILILANI, HI on Saturday, February 21, 2009

These Speakers are a bit on the expensive side but if you have a truck like i do, and don't have alot of options for getting tons of speakers. are the BEST.even if you only put in one pair of these they will not disapoint. at 3/4 volume i hit 115db and they still sounded crisp and clean. i would have gone to the max but when you turn it off and have a ringing in your ears for several mins, yeah. and rather not get the cops on my tail.

Boston Massacre

Written By riveraguy, Mission Viejo, CA on Monday, September 22, 2008

Awsome speakers not bass producers but amazing highs, but not worried about bass because I have 1 12" BOSTON ACOUSTICS G5 sub Clean and hits hard and does not bug your ears at all.

Get everything you’ll need to enjoy your new Boston Acoustics Pro60 SE

Reduce ambient road noise and your vehicle's "rattles," for better sound inside your car.
You'll need speaker wire to connect your speakers to your amp.
Keep your speakers clean and dry. They compress to fit behind your speakers.
The right tools will help keep your installation simple and clean.
Dynamat 10415 Xtreme Speaker Kit

Dynamat 10415 Xtreme Speaker Kit

Two 10-in. x 10-in. Sheets

Item #: 15410415

(46)

$26.99
Add to Cart
Dynamat 10435 Xtreme Door Kit

Dynamat 10435 Xtreme Door Kit

With four 12" x 36" sheets — covers two doors

Item #: 15410435

(32)

$99.99
Add to Cart
Dynamat SuperLite Tri-Pak

Dynamat SuperLite Tri-Pak

Triple package — 3 sheets, 12 square feet (Model #10612)

Item #: 15410612

(17)

$69.99
Add to Cart
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(31)

Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B

(53)

Boom Mat 6-3/4

Boom Mat 6-3/4" Speaker Baffles

Protect your speakers
Regular and slim-line sizes (Slim-line: 3" depth)

Item #: 696B050341

(9)

$9.99
Add to Cart
XTC 6-1/2

XTC 6-1/2" Speaker Baffles

Protect your speakers (3-1/4" depth)

Item #: 237XT65

(157)

$7.99
Add to Cart
Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT

(15)

$19.99
Add to Cart
S&G Tool Aid 87615

S&G Tool Aid 87615

Window and Door Clip Removal Tool

Item #: 18187615

(12)

S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(71)

Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL

(54)

$24.99
Add to Cart
Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042

(8)

$49.99
Add to Cart
Spec Tools SQR-200a Squeeze Wrench

Spec Tools SQR-200a Squeeze Wrench

Narrow space ratchet kit with 18 sockets

Item #: 180SQR200A

(1)

$49.99
Add to Cart
Install Bay 3320

Install Bay 3320

Auto-ranging digital multimeter

Item #: 1203320

$39.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL

(4)

$29.99
Add to Cart