Boston Acoustics SR Series speakers bring exceptional sound quality to your car. These speakers handle high power with ease, and deliver amazing detail that you've probably never heard before, even with your favorite tracks.

The SR50 component system features a strong 5-1/4" copolymer woofer that delivers the bass beat with ease. A heatsink cooling system ensures the motor assembly won't overheat, no matter how long or hard you push it. A small but powerful neodymium magnet keeps the mounting depth shallow so you can fit your SR Series speakers in lots of different vehicles. Mounting options include grilles that add a stylish touch to your custom installation.

The separate soft dome tweeter disperses high notes in an especially wide pattern — everyone hears natural-sounding music, no matter where they're sitting. The 1" tweeter can be either surface- or flush-mounted to match your installation preference. The external crossover, with its 3-level tweeter control, ensures that the tweeter and woofer mesh together perfectly for a smooth response.

Product Highlights:

  • component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
  • 5-1/4" copolymer woofer with rubber surround
  • 1" Kortec® dome tweeter with flush- and angle-mount options
  • external detachable crossover with bi-wire and bi-amp options
  • tweeter attenuation circuits (0, -2, -4 dB)
  • grilles included
  • power range: 2-85 watts RMS (250 watts peak power)
  • frequency response 50-20,000 Hz
  • sensitivity: 90 dB
  • top-mount depth: 2-1/4"
  • warranty: 2 years
  • Our 60-day money-back guarantee

Why install component speakers?

A component speaker system gives you the best possible performance from your car audio system. A system consists of separate woofers, tweeters, and crossovers, each designed to cover one specific range of frequencies. As separate components, the woofer can move freely to deliver more powerful performance, while the tweeter can be custom-mounted in a better spot up closer to your ears, revealing a whole new world of detail. Separate crossovers are far superior to the simple filters wired into full-range speakers, so the components work together for smoother, more focused sound.

Hands-on research

What's in the box?

Download owner's manual

  • 2 Woofers
  • 2 Tweeters
  • 2 Woofer crossovers
  • 2 Tweeter crossovers
  • 2 Woofer grilles
  • 2 Woofer grille frames
  • 2 Tweeter grilles
  • 2 Woofer gaskets
  • Two 5' lengths of tweeter speaker wire (each with female quick slides on one end and bare wire on the other)
  • 2 Tweeter flush mounts
  • Two 2-piece tweeter angle mounts
  • Twenty 1" Self-tapping screws
  • 8 Metal speed clips
  • Four 1/2" Self-tapping screws
  • Two 3/8" Tweeter housing screws
  • Two 2-piece metal tweeter spring mounting clips
  • 2.5mm Allen wrench
  • Installation Instructions
  • Warranty information
  • Product Registration card

Product Research


Woofer: The SR50 component system is equipped with copolymer woofers with butyl rubber surrounds. Each woofer has a neodymium magnet, which has a high power-to-weight ratio and a compact size about one-tenth the size of traditional iron-ferrite magnets. The dual-stage aluminum heat sink is integrated into the motor structure to draw heat away from the voice coil increasing the power handling capability.

Tweeter: The SR50 component system features 1" Type S-1 Kortec soft-dome tweeters for a smooth high frequency response and linearity. Kortec is a specially engineered material with the rigidity of a composite dome and the smoothness and detailed response of cloth. The supplied Quick-fit mounting cup simplifies tweeter installation. The tweeters come with flush and angled surface mount brackets.

Tweeter Dimensions:

  Frame Diameter Cutout Diameter Mounting Height Mounting Depth
Flush Mount 2.046" 1.734" 0.369" 0.72"
Angled Surface Mount 1.872" Screw holes only 1.505" Screw depth only

Crossover: The SR50 system comes with two-way adjustable crossovers. Additionally, each crossover comes in two pieces (a woofer crossover and a tweeter crossover), and can be mounted separately or docked together and mounted as one piece. The following adjustments can be made on each crossover:

  • Tweeter Attenuation: On the tweeter crossover, you can adjust the tweeter output by placing the supplied jumper on the appropriate terminals. You can select an unattenuated tweeter output (0dB attenuation), or an attenuated output of -2dB or -4dB. The factory default position is -2dB attenuation.
  • On Axis/Off Axis Configuration: On the woofer crossover you can configure the output of the woofer for on-axis (listener is directly between the left and right woofers) or off-axis (listener is behind or in front of the area between the woofers) performance. For on-axis configuration, the supplied jumper should be placed on the SQ1 terminals (factory position). For off-axis listening, the jumper goes on the SQ2 terminals.
  • Input Configurations:
    • Separate Inputs: If you are bi-amping the component system (separately powering the woofer and tweeter with different amplifier channels), no additional wiring needs to be done. The woofer crossover and the tweeter crossover each have their own separate inputs and outputs.
    • Single Input: If you are powering the component system with a single full-range input, you will need to wire the woofer crossover and the tweeter crossover together using the supplied jumper wires (there are two). The speaker wire from the amplifier connects to the input on the tweeter crossover. The woofer and tweeters are then connected to their respective outputs.

      Note: No crossover frequency or slope information was provided by the manufacturer.

Crossover Dimensions:

  • Length: 6.679"
  • Height: 1.498"
  • Width: 1.717" (mounted individually)
  • Width: 3.232" (docked together)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Boston Acoustics SR50 Reviews

Average Customer Review:

11 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $350 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Significant Upgrade

Written By Steve H, Bentonville, AR on Thursday, February 07, 2013

Crutchfield Customer Review (What's this?)

Replaced the stock speakers in my son's Celica, the music is much cleaner! We had already replaced the stock head unit, so next step was the speakers. It is not any louder than before (just not enough power coming out of head unit to maximize the potential of these speakers), but sounds so much better. Next step will be an amp to really push the speakers to new levels, I know they can handle it.


Written By Mike T, Florida on Tuesday, November 06, 2012

Crutchfield Customer Review (What's this?)

Not impressed. Bass speaker has weird rattle noise at certain volume levels. Tried different amps, no difference. Crossovers are bulky. Basically a waste of money.


Written By rrmdeuce, Winnetka CA on Saturday, September 29, 2012

Crutchfield Customer Review (What's this?)

Installed these today to replace a pair of Polk component speakers. The BA's sound good at low to mid volumes but break-up when you put serious power to them. I also think the Polk had better bass so that's a trade off. One of the tweeter didn't work out of the box... but Crutchfield is sending a new set out Monday no questions asked, that's why I love dealing with them. If I had it to do over again I would have just replaced my Polk speakers save some $ and some time screwing with the tweeters.

Pros: Sound good but gave up some bass

Cons: Those tweeters, what a PAIN... who came up with that mounting system? and one of them not working out of the box.

Boston Accoustics SR50

Written By Daren, Spokane WA on Wednesday, September 05, 2012

Crutchfield Customer Review (What's this?)

These speakers sound terrific, especially for 51/4". Turns out I could have fit 61/2", but I still love them.

Pros: Terrific sound from very small sprakers.

Cons: Crossovers are a little too large.

Really good sound

Written By Roberto A., Buena Park Ca on Tuesday, July 17, 2012

Crutchfield Customer Review (What's this?)

Great sound I love them

Pros: Lots of power. I paired them with a Rockford fosgate prime

Cons: Tweeter a little hard to install


Written By Frank, Texas on Sunday, June 10, 2012

Crutchfield Customer Review (What's this?)

These speakers were easy to install, and sound great at all levels!

best bet

Written By Rich, Long Island, NY on Saturday, April 14, 2012

Crutchfield Customer Review (What's this?)

Was skeptical about these because of the low price. Bottom line I have spent over 2k with Crutchfield over the last few years and these were the best purchase yet. If you're hesitant, you should just buy these! I have 4 of these powered by a JL4500 and the sound is amazing in my ford f350 crew cab! Don't waste time like I did with the full range speakers, jump to these and save!!

Pros: Easy of install

Cons: Nothing really, but mounting the tweeters to the supplied cups is a pain.

great sound

Written By Aaron, portage, michigan on Saturday, March 03, 2012

i put these in my grand marquis and the sound was outstanding I wish i could have went with the 6.5 instead but it would not fit in my doors.

Pros: sound

Cons: none

Great speakers

Written By Anonymous, GA on Friday, December 30, 2011

Crutchfield Customer Review (What's this?)

Just bought these and had them installed in my truck. Replaced a pair of infinity kappas and these bostons blew them out of the water. I would say the difference between the infinitys and these is equivalent to the difference between stock speakers and the infinitys. Give them a good amp and you will not be disappointed. 100% recommended.

Loud and extremely clear!

Written By Aaron, Connecticut on Tuesday, October 04, 2011

After much research for the perfect component speakers I finally decided to go with these because I do have experience with Boston Acoustic and I have always liked there sound. I bought these, installed them and they go extremely loud but stay extremely clear. Like the other person said, I removed my rear speakers because of how loud these are. You can clearly hear crystal clear vocals in the back seat. Also though you NEED to get the proper amp for these or you will not be happy. When I first got them I tried running them off headunit power and was very unimpressed. Bought a JL audio slash 300/2 amp, and WOW, what a difference! Anyone looking to buy these you will not be disappointed. I am running these with 2 diamond audio d6 12's and it sounds incredible!

Loud Speakers

Written By crescentfallen, Nj on Thursday, July 14, 2011

I always buy polk speakers but decided to give these a try.. replaced my front door speakers on my E39 and though I wasted my money. BMW factory alpine amp could'nt cut it.. I then hooked up the front doors to a Pioneer GM amp using the crossovers and man what a difference.. These babys are loud, clear even at high decibels.. I disconnected my rear speakers did'nt need them anymore, got a 10" sealed rockford sub in the trunk.. Honestly this setup sounds way better than my altima with Polk momos up front and rear with 2 10s in the trunk.. I would definately recommend these speakers just make sure you have an amp to power these bad boys

Get everything you’ll need to enjoy your new Boston Acoustics SR50

Reduce ambient road noise and your vehicle's "rattles," for better sound inside your car.
You'll need speaker wire to connect your speakers to your amp.
Keep your speakers clean and dry. They compress to fit behind your speakers.
The right tools will help keep your installation simple and clean.
Dynamat 10415 Xtreme Speaker Kit

Dynamat 10415 Xtreme Speaker Kit

Two 10-in. x 10-in. Sheets

Item #: 15410415


Add to Cart
Dynamat 10435 Xtreme Door Kit

Dynamat 10435 Xtreme Door Kit

With four 12" x 36" sheets — covers two doors

Item #: 15410435


Add to Cart
Dynamat SuperLite Tri-Pak

Dynamat SuperLite Tri-Pak

Triple package — 3 sheets, 12 square feet (Model #10612)

Item #: 15410612


Add to Cart
T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1


XTC 5-1/4

XTC 5-1/4" Speaker Baffles

Protect your speakers (Slim-line: 2-1/2" depth)

Item #: 237XT52


Add to Cart
Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT


Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100


Add to Cart
S&G Tool Aid 87615

S&G Tool Aid 87615

Window and Door Clip Removal Tool

Item #: 18187615


S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650


Pro.Fit Hook Tool Set

Pro.Fit Hook Tool Set

Installation tools — pair

Item #: 042DM3022


Pro.Fit Trim Panel Tool

Pro.Fit Trim Panel Tool

Remove your vehicle's trim panels without damage

Item #: 042DM4022


Pro.Fit Wire Worm

Pro.Fit Wire Worm

Installation tool helps route wiring through tight spaces

Item #: 042DM4533


Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL


Add to Cart
Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042


Add to Cart
Spec Tools SQR-200a Squeeze Wrench

Spec Tools SQR-200a Squeeze Wrench

Narrow space ratchet kit with 18 sockets

Item #: 180SQR200A


Add to Cart
Install Bay 3320

Install Bay 3320

Auto-ranging digital multimeter

Item #: 1203320

Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL


Add to Cart