About the Boston Acoustics SX95
The clear, well-balanced sound of Boston's SX speakers offers an excellent performance boost to almost any car audio system.
The SX95 6"x9" speaker combines two Type-S2 tweeters with a heavy duty copolymer woofer and a durable rubber surround. A contoured tweeter plane provides an extended stereo "sweet spot" for smooth, realistic high-frequency response — no matter where you're sitting.
A built-in crossover sculpts the frequencies going to the woofer and tweeters for smooth blending of the highs and mids, and protects the tweeter against power overload. Compact, lightweight neodymium magnets reduce the size of these speakers so they can fit in more vehicles without sacrificing performance.
Priced per pair
Product highlights:
- 6"x9" 2-way speakers (pair)
- copolymer woofer cone with butyl rubber surround
- dual Type-S2 Kortec dome tweeters
- compact neodymium magnets for shallower mounting depth
- power range: 2-60 watts RMS (200 watts peak power)
- frequency response: 35-20,000 Hz
- sensitivity: 92 dB
- top-mount depth: 2-5/8"
- warranty: 2 years
- MFR # SX95
What's in the box:
Boston Acoustics SX95 owner's manual
- Two 2-way speakers (with 2 Tweeters each)
- 2 Grills
- 2 Adhesive backed foam gaskets
- Two 8" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other)
- Eight 1-1/2" Allen head screws
- Eight 2-1/4" Bolts
- Eight flat washers
- Eight nuts
- Allen wrench driver attachment
- 8 Speed clips
- 4 Butt connectors
- Specification sheet
- Warranty information
- Product registration card
Customer reviews for Boston Acoustics SX95
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Boston Acoustics SX95
Features & specs
| General | ||
|---|---|---|
| Speaker Size | ||
| Design | 2-way | |
| Tweeter Design | Dome x 2 | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Kortec | |
| Woofer Composition | Copolymer | |
| Woofer Surround | Butyl rubber | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | 92 | |
| Sensitivity at 2.83 volts | N/A | |
| Frequency Response | 35 - 20k Hz | |
| Minimum RMS Wattage | 2 | |
| Maximum RMS Wattage | 60 | |
| Peak Power Handling (Watts) | 200 | |
| Top-mount Depth (Inches) | 2 5/8 | |
| Bottom-mount Depth (Inches) | 3 1/4 | |
| Cutout Diameter or Length (inches) | 0 | |
| Mounting Height (Inches) | 0.752 | |
| Frame Width | 6.43 | |
| Frame Length | 9.298 | |
Product Research
Features
Tweeter: Each speaker uses two type-S2, 3/4" Kortec dome tweeters. The dual tweeters exhibit smoother frequency response and higher output than conventional two-way or three-way designs. Kortec is a silky fabric saturated on the underside with a proprietary stiffening agent. Because the inside surface of the dome is ultra stiff, the tweeter tracks the signal with ease and produces an excellent transient attack. Simultaneously, the soft, self-dampening top layer eliminates unwanted resonance, so the sound is smooth and articulate. The contoured tweeter plane delivers smooth extension and strong on-axis and off-axis response.
Woofer: The copolymer woofer cone has a durable butyl rubber surround and stands up to the harsh automotive environment.
Crossover: All SX speakers feature specifically tuned crossovers to deliver the best blend between the tweeter and woofer. Each also features tweeter protection for optimal performance and reliability.
Voice Coil: The oversized 1-1/2" voice coil increases overall power handling and reliability.
Installation: The compact size of the magnet allows SX series speakers to fit where other high quality speakers don't. Neodymium magnets offer extraordinary power-to-weight ratio, approximately ten times the magnetic strength of a conventional iron-ferrite magnet of equal size.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
