Skip Navigation

Retrosound R-413N

RetroMod™ 4"x10" 2-way car speakers

8 Reviews

Item #: 068R413N

This item is no longer available.

Original Price: $129.99 pair

Shop all 4"x10" Speakers

Add to Cart

$129.99 pair

Overview

Our take on the Retrosound R-413N

Retrosound makes it easy to replace the factory speakers in almost any classic, vintage, or even new car. Their RetroMod Series speakers feature extremely shallow chrome baskets designed to fit into a wide variety of standard speaker locations. They may look old school, but Retrosound builds their speakers from the ground up, using the latest techniques and materials.

A vintage fit

Retrosound makes it easy to replace the factory speakers in almost any classic, vintage, or even new car. Their RetroMod Series speakers feature extremely shallow chrome baskets designed to fit into a wide variety of standard speaker locations. They may look old school, but Retrosound builds their speakers from the ground up, using the latest techniques and materials.

Each R-413N 4"x10" speaker features a powerful neodymium magnet and a low-carbon steel chrome frame that form a strong foundation. The sturdy pulp composite woofer with its Santoprene surround delivers powerful performance while standing up to heat and humidity. The Mylar dome tweeter broadcasts detailed highs without sounding shrill, and its low profile helps increase installation options.

Although efficient enough to play well with any receiver alone, these RetroMod speakers can handle the high power from aftermarket amplifiers to deliver your music with plenty of impact. Replace your wornout old 4"x10"s with these updated Retrosounds, and your tunes will sound new again, just like your classic ride.

Priced per pair

What's in the Box:

  • Two 2-way 4x10 SVC speakers
  • Two 5' Lengths of speaker wire
  • Eight 1-1/8" Self tapping screws
  • 8 Speed clips
  • 2 Grilles
  • 2 Grille rings
  • 2 Pieces of grille putty
  • Owner's manual

Product Highlights:

  • 4"x10" 2-way speakers (pair)
  • pulp composite woofer cone with Santoprene surround
  • Mylar dome tweeter
  • power range: 2-90 watts RMS (160 watts peak power)
  • frequency response: 43-21,000 Hz
  • sensitivity: 87 dB
  • top-mount depth: 1-3/4"
  • grilles included
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Retrosound R-413N Reviews

Average Customer Review:

8 Reviews

Retrosound R-413N

Ethan L from Lowell, AR. on 2/19/2013

1987 Pontiac Fiero
Crutchfield Customer Review (What's this?)

Great sound restorred to a fun vehicle.

Pros: extremely simple installation, cost effective, tremendous follow-up seervice

Cons: None

Not at all happy

BrianB from Decatur, IL on 1/17/2013

1993 Chevrolet S10
Crutchfield Customer Review (What's this?)

Not at all happy with these speakers. The sound is horrible. Retrosound is a fitting name since they sound exactly like the speakers that were in my 72 Ford LTD with the 8-track player. I will be looking for another 4x10 set to replace these. Crutchfield on the other hand, awesome. Really liked the item specific instructions that were sent. Made installation a breeze.

Pros: They fit

Cons: Not worth the price, terrible sound quality

I agree...not great

Soup from Chicago IL on 9/1/2012

Crutchfield Customer Review (What's this?)

I have to agrea with Beau...everything he sadi was right on!!!

Pros: They fit

Cons: over priced for the quality...deceiving description of watt capability!!!

not great

beau from houston on 6/22/2012

1995 Chevrolet Tahoe
Crutchfield Customer Review (What's this?)

was excited when I saw how many watts these claim to handle, but when i opened them up, they were cheap and the magnet was about a third the size of the factory speakers in my tahoe. wouldn't recommend them.

Pros: not many

Cons: expensive, cheaply built, not great sound.

rear speaker for s-10

Anonymous from Wyoming on 7/24/2011

Crutchfield Customer Review (What's this?)

These are pretty decent speakers but they don't fit as well as they could. They have a shorter depth for clearance but their frame width near the base and on sides has less clearance (or narrowness) than stock speakers. Btw, there is no need for the extra size of frame metal at those points because the speaker cone comes no where close to hitting the metal frame. Also why the two small tweeters instead of having just one that gives higher quality sound? I like their fairly high RMS numbers considering many cd/radio units now a days put out a good amount power. Their bass is ok but could be richer sounding. I would buy these again and would also pay more money if they improved them along the lines I've mentioned. Bob

Pros:

Cons:

Retrosound R-413N

whitgallman from Charlotte, NC on 6/15/2011

1990 Dodge D Series
Crutchfield Customer Review (What's this?)

The Crutchfield guys led me to believe these would take some modification work on my 1990 Cummins Powered Ram Dodge to install. On the contrary, they went in easily. 2 screws held in the cover and 2 nuts held down the speaker to the cover. All the connectors you sent made it quick & easy. The RamDodge sounds really sweet inside AND outside now.

Pros:

Cons:

Easy Install, Good Quality

MarkN from Sunnyvale, CA on 9/9/2010

Crutchfield Customer Review (What's this?)

The install was flawless, all the parts were there and it was so clear even my 4 year old understood what to do and helped on the install. The quality of the speakers were good....not the quality of Infinity or JBL, but definately better then the stock speakers it replaced. Definately well worth the money. Thanks Crutchfield for making sure all the help I needed was in the box :)

Pros:

Cons:

Retrosound R-413N

JEFF from ASHEVILLE, NC on 2/4/2010

1983 Chevrolet Suburban
Crutchfield Customer Review (What's this?)

I bought these speakers for a 1983 Chevy truck. The advisor told me that I might have some issues installing them, however there were none. They fit great. I reused the factory screws to mount them in the same mounting holes they came out of. The only fabrication required is to lenghthen the speaker wires, as the new terminals are on the top, and factory is on the bottom. I reused the factory speaker grilles, as they fit perfectly. The sound quailty is greatly improved over the factory. They are a great buy for the money, and installation was a breeze.

Pros:

Cons:

Details

Hands-on research

Features and Specs

General
Design 2-way
Tweeter Design Dual Domes
Tweeter Composition Mylar
Woofer Composition Pulp Composite
Woofer Surround Santoprene
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity 87 dB at 1 watt
Frequency Response 43 - 21k Hz
RMS Power Range (Watts) 2-80
Peak Power Handling (Watts) 160
Impedance (Ohms) 4
Top-mount Depth (Inches) 1 3/4
Bottom-mount Depth (Inches) 2 3/16

Product Research

Features

Woofer: The speakers feature a rigid pulp composite cone woofer with a Santoprene surround. The woofer uses a Neodymium magnet to achieve its shallow depth, so it fits in tight factory locations.

Tweeters: Each speaker has two Mylar dome tweeters.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Library