About the Retrosound R-413N
A vintage fit
A vintage fit
Retrosound makes it easy to replace the factory speakers in almost any classic, vintage, or even new car. Their RetroMod Series speakers feature extremely shallow chrome baskets designed to fit into a wide variety of standard speaker locations. They may look old school, but Retrosound builds their speakers from the ground up, using the latest techniques and materials.
Each R-413N 4"x10" speaker features a powerful neodymium magnet and a low-carbon steel chrome frame that form a strong foundation. The sturdy pulp composite woofer with its Santoprene surround delivers powerful performance while standing up to heat and humidity. The Mylar dome tweeter broadcasts detailed highs without sounding shrill, and its low profile helps increase installation options.
Although efficient enough to play well with any receiver alone, these RetroMod speakers can handle the high power from aftermarket amplifiers to deliver your music with plenty of impact. Replace your wornout old 4"x10"s with these updated Retrosounds, and your tunes will sound new again, just like your classic ride.
Priced per pair
Product highlights:
- 4"x10" 2-way speakers (pair)
- pulp composite woofer cone with Santoprene surround
- Mylar dome tweeter
- power range: 2-90 watts RMS (160 watts peak power)
- frequency response: 43-21,000 Hz
- sensitivity: 87 dB
- top-mount depth: 1-3/4"
- grilles included
- warranty: 1 year
- MFR # RETROSOUND R-413N
What's in the box:
Retrosound R-413N owner's manual
- Two 2-way 4x10 SVC speakers
- Two 5' Lengths of speaker wire
- Eight 1-1/8" Self tapping screws
- 8 Speed clips
- 2 Grilles
- 2 Grille rings
- 2 Pieces of grille putty
- Owner's manual
Customer reviews for Retrosound R-413N
Loading...
Loading reviews...
Average review:
3.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Retrosound R-413N
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | Dual Domes | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Mylar | |
Woofer Composition | Pulp Composite | |
Woofer Surround | Santoprene | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 87 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 43 - 21k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 80 | |
Peak Power Handling (Watts) | 160 | |
Top-mount Depth (Inches) | 1 3/4 | |
Bottom-mount Depth (Inches) | 2 3/16 | |
Cutout Diameter or Length (inches) | 0 | |
Mounting Height (Inches) | 0.473 | |
Frame Width | 4.374 | |
Frame Length | 10.138 |
Product Research
Features
Woofer: The speakers feature a rigid pulp composite cone woofer with a Santoprene surround. The woofer uses a Neodymium magnet to achieve its shallow depth, so it fits in tight factory locations.
Tweeters: Each speaker has two Mylar dome tweeters.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...