About the Retrosound R-693
A vintage fit
A vintage fit
Retrosound makes it easy to replace the factory speakers in almost any classic, vintage, or even new car. Their RetroMod Series speakers feature extremely shallow baskets designed to fit into a wide variety of standard speaker locations. They may look old school, but Retrosound builds their speakers from the ground up, using the latest techniques and materials.
Each R-693 6"x9" speaker features a powerful neodymium magnet and a low-carbon steel chrome frame that form a strong foundation. The stiff polypropylene woofer cone with its Santoprene surround delivers powerful performance while standing up to heat and humidity. The Mylar dome tweeter and midrange driver broadcast detailed highs and mids without sounding shrill. The tweeter assembly's low profile allows this speaker to fit behind more factory grilles.
Although efficient enough to play well with any receiver alone, these RetroMod speakers can handle the high power from aftermarket amplifiers to deliver your music with plenty of impact. Car makers put paper cone 6"x9" speakers on the rear decks of many older vehicles. Replace them with these up-to-date Retrosounds, and your tunes will sound new again, just like your classic ride.
Priced per pair
Product highlights:
- 6"x9" 3-way speakers (pair)
- polypropylene woofer cone with Santoprene surround
- Mylar dome midrange and tweeter
- power range: 2-100 watts RMS (200 watts peak power)
- frequency response: 40-21,000 Hz
- sensitivity: 90 dB
- top-mount depth: 2-7/16"
- grilles included
- warranty: 1 year
- MFR # R-693
What's in the box:
Retrosound R-693 owner's manual
- Two 3-way 6x9 speakers
- 2 Grilles
- Two 12' Lengths of speaker wire
- Eight 1-1/2" Self tapping screws
- 8 Speed clips
- Owner's manual
Customer reviews for Retrosound R-693
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Retrosound R-693
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 3-way | |
Tweeter Design | Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Mylar | |
Woofer Composition | Poly | |
Woofer Surround | Santoprene | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 90 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 40 - 21k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 100 | |
Peak Power Handling (Watts) | 200 | |
Top-mount Depth (Inches) | 2 7/16 | |
Bottom-mount Depth (Inches) | 2 15/16 | |
Cutout Diameter or Length (inches) | 0 | |
Mounting Height (Inches) | 0.475 | |
Frame Width | 6.545 | |
Frame Length | 9.195 |
Product Research
Features
Woofer: The speakers feature poly cone woofers with Santoprene surrounds.
Midrange/Tweeters: The tweeters and midranges are low profile Mylar domes.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
These speakers were the exact match to the power output of my new Alpine Head Unit. The reviews were a deciding factor in purchasing this set of speakers. I was not disappointed.
Mike S. from Fayetteville, NC