2010 Dodge Journey
Crutchfield Customer Review (What's this?)
Pros: Fit good,sound better, than the old.
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item #: 068R69N
RetroSound makes it easy to replace the factory speakers in almost any classic, vintage, or even new car. Their RetroMod Series speakers feature extremely shallow chrome baskets designed to fit into a wide variety of standard speaker locations. They may look old school, but RetroSound builds their speakers from the ground up, using the latest techniques and materials.
The single R-69N 6"x9" speaker is designed for a classic car with only one speaker opening on its dash or rear deck. The woofer features dual voice coils, each one connected to its own tweeter. Your stereo receiver connects to both voice coils, so you get a stereo mix from a single speaker. In effect, you get two 2-way speakers in one frame, for modern sound in your vintage application.
The R-69N speaker features a powerful neodymium magnet and a low-carbon steel chrome frame that form a strong foundation. The sturdy pulp composite woofer with its Santoprene surround delivers powerful performance while standing up to heat and humidity. The two Mylar dome tweeters broadcast detailed highs without sounding shrill, and their low profile helps increase installation options.
Although efficient enough to play well with any receiver alone, this RetroMod speaker can handle the high power from aftermarket amplifiers. Replace that wornout old 6"x9" with this updated RetroSound, and your tunes will sound new again, just like your classic ride.
Important Note: This is a single 6"x9" speaker, so you'll need to purchase a pair for vehicles with two 6"x9" openings.
Priced per single speaker
Nestor, Puerto Rico
Pros: Fit good,sound better, than the old.
Replaces the in dash mono speaker that late model firebirds all came with.... Shortly to get blown out and never replaced. This speaker fits the dash and sounds reasonably good compared to the old AC Delco. It sounds a little "tinny" but not bad for what it is.
Pros: Replacement for a hard to find mono dash speaker. Now it's two voice coils on one. This would have been great in the 70's.
Cons: I expected it to be comparable to the rear speakers (different brand) in sound quality. Really tinny monoish frequency response
Speakers are very clear. Great replacement for original 1998 speakers. Clear and crisp sound. No regrets or problems
Great retro speaker for classic cars
Pros: Sounds great
Cons: Mounting holes was a little offset for my classic vehicle, had to modify it
Last year I replaced the ancient AM/FM/cassette deck in my 1964 Plymouth Belvedere with a RetroSound Model One radio. I've really been enjoying the modern radio in my vintage Mopar. About six months ago I replaced the original speaker under the dash with a RetroSound R-48N dual-voice speaker. That provided much-improved sound quality. I am in the process of redoing some of the interior in the car. Since I had the rear seat and package tray out of the car, I decided to take advantage of the rear access and replace the 20+ year-old pair of cheapo speakers in the rear with a RetroSound R-69N 6x9-inch, dual-voice speaker mounted under the center of the new package tray. I ordered the speaker from Crutchfield, who in turn forwarded my order to RetroSound. I received the new speaker the very next day! You can't get any better service than that! The new speaker's mounting holes lined up perfectly with the factory mounting opening under the package tray support, so it took me about 15 minutes to bolt in the new speaker. The wiring was simple. I just spliced in the wires that came with the speaker to the rear wires I'd installed in the car many years ago. I am definitely not an audiophile, and my car's sound system is pretty basic and low-powered, but I think the R-69N sounds great. It mates up perfectly with the RetroSound Model One, and the available volume is plenty for my needs. RetroSound and Crutchfield are great to deal with. Good products and fast service.
Pros: The speaker is cool looking with chromed frame. It was a shame to have to hide it under the package tray. The speaker is relatively shallow, so it will fit into the tight confines under a dashboard or other places. The speaker is very nicely made and provides excellent performance for the price.
Cons: Can't think of any cons about the speaker.
Excellent speaker fit well in the dash of my truck sounds great.
Pros: Perfect for old cars
Nice low profile, fit perfectly in the old car I was upgrading sound in.
Pros: Great instructions for varying impedence! Very clear. This speaker is very versatile.
Cons: None. Just a little trebley.
Works good in old Pontiac
Cons: None that I see
Product was as described. Installed easily. Good sound.
I purchased a pair of these speakers for a 2008 Nissan Sentra to go in the front door openeings and they fit prefectly even in this car. Thesound quality is excellent and they are a incredible upgrade from any factory they arent the best speakers but they are very nice. The sound is evenly matched to my back JVC 6x9's which can handle up to 330W max but have a higher RMS at 100. The sound is crisp as well as clear and maintains in tact even at very high volumes or during big bass excursions. I highly recommend these for highs and maybe mids at an entry level but work best with a complete 4 channel system upgrade as the replacement for vocal speakers. They offer so so bass so dont expect to get a pounding from these but are overall a very nice choice for any car that can hold a 6x9.
Pros: Excellent speaker for high tones and notes as well as maintains consistency thru high levels of bass
Cons: Doesnt provide much bass by itself
I installed this dual core speaker in my 98 Vanden Plas due to factory oem speaker had blown i had and upholstery shop nearby to fit it my car had a dual core subwoofer on rear parcel however i needed a slim one as far as depth due to very tight area over gas tank .....this speaker worked perfectly however the bass could be better but at lower levels it works just fine so this speaker is great if bass was a little tighter i would give five stars
Pros: Great Dual core output
Cons: needs a little tighter bass
I installed a 6x9 and 4x10 speaker in my 67 Fury convertible, one in the dash and the other in the back seat. Both fit perfect and sound great. These speakers were the solution to my desire to install a modern stereo unit and use the original speaker locations in a car that originally had a mono system . This can present a real problem in classic cars, many of which have very little room under the dash. They can be used in either stereo or mono mode, giving you the flexibility to install the system that suits your sound needs best. I recommend these speakers to anyone who wants to keep the original look of their classic wheels while utilizing modern audio technology.
I purchased this for my 1991 Honda Accord LX wagon, which comes with a 6x9 bass speaker at the very rear of the car on the driver's side. The stamped steel frame of this speaker is unnecessarily large in dimension right where it transitions to the mounting plane, making it too large (by just 1/16") to fit in the standard 6"x9" relief well, into which any other typical 6"x9" speaker would fit just fine. If you have a difficult-to-modify relief well opening (the Honda's is steel, and indeed difficult to modify), think twice before purchasing this speaker. Sound quality is passable, but not impressive in any way. The Crutchfield site does not acknowledge the wagon as one of the available Honda Accord LX body styles for 1991. The wagon has different speaker sizes in the rear than either the Accord sedan or coupe - would be great if they updated their site to include the wagons.
I purchased this speaker as a replacement for the single rear dual voice coil in my Honda 94 Accord Wagon. Crutchfield do not recommend this unit because of fit and for someone not familiar with tools that is correct. I have the speaker in the car and it works great. The catch? You have to work a little to get the fit. Tools are Dremel, screw driver, soldering gun, and 4 two inch machine screws with same threading as originals. Time if you review job before work about 1 hour or less. You have to cut the mount tabs on the left and right of speaker off and trim out a little of the interior wall material where the speaker mounts. I used factory wiring and tack soldered connections.
|Tweeter Design||Dual Dome|
|Woofer Composition||Pulp Composite|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
90 dB at 1 watt
|Frequency Response||40 - 21k Hz|
|RMS Power Range (Watts)||2-100|
|Peak Power Handling (Watts)||200|
|Top-mount Depth (Inches)||1 13/16|
|Bottom-mount Depth (Inches)||2 1/4|
Woofer: The speaker features a rigid pulp composite cone woofer with a Santoprene surround. The woofer uses a Neodymium magnet to achieve its shallow depth, so it fits in tight factory locations.
Tweeters: Two Mylar tweeters are wired separately so this single speaker will accept a stereo input.
Dual Voice Coils: The woofer has dual voice coils, each wired with one of the tweeters. The stereo input is useful in many older cars with a single speaker location in the dash or rear deck. If used in a standard two speaker application the inputs should be wired in parallel (to present a 2Ω load) or series (to present an 8Ω load).
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
These speakers from Retrosound make it a lot easier to enjoy modern stereo sound in a pre-1960s vintage car or truck.