RetroSound R-69N

Single 6"x9" 2-way car speaker with dual voice coils

Item #: 068R69N

In Stock

12 Reviews

Installation gear for most cars

Your price: $75.99 each Earn up to 76 Rewards points

Add to Cart

+ Add to wishlist + Email me alerts for this product

Ships Free From Manufacturer

View all associated offers

Does it fit my car?

Select your car

Find what fits your car

Retrosound R-69N

One classic speaker

RetroSound makes it easy to replace the factory speakers in almost any classic, vintage, or even new car. Their RetroMod Series speakers feature extremely shallow chrome baskets designed to fit into a wide variety of standard speaker locations. They may look old school, but RetroSound builds their speakers from the ground up, using the latest techniques and materials.

The single R-69N 6"x9" speaker is designed for a classic car with only one speaker opening on its dash or rear deck. The woofer features dual voice coils, each one connected to its own tweeter. Your stereo receiver connects to both voice coils, so you get a stereo mix from a single speaker. In effect, you get two 2-way speakers in one frame, for modern sound in your vintage application.

The R-69N speaker features a powerful neodymium magnet and a low-carbon steel chrome frame that form a strong foundation. The sturdy pulp composite woofer with its Santoprene surround delivers powerful performance while standing up to heat and humidity. The two Mylar dome tweeters broadcast detailed highs without sounding shrill, and their low profile helps increase installation options.

Although efficient enough to play well with any receiver alone, this RetroMod speaker can handle the high power from aftermarket amplifiers. Replace that wornout old 6"x9" with this updated RetroSound, and your tunes will sound new again, just like your classic ride.

Important Note: This is a single 6"x9" speaker, so you'll need to purchase a pair for vehicles with two 6"x9" openings.

Priced per single speaker

Product Highlights:

  • single 6"x9"" 2-way speaker
  • pulp composite woofer cone with Santoprene surround
  • dual voice coils for 2-channel operation
  • dual mylar dome tweeters
  • power range: 2-100 watts RMS (200 watts peak power)
  • frequency response: 40-21,000 Hz
  • sensitivity: 90 dB
  • top-mount depth: 1-13/16"
  • grille not included
  • warranty: 1 year
  • Our 60-day money-back guarantee

Why replace your car's original speakers?

The speakers that originally came in your car were made from inexpensive materials, designed to create acceptable sound at the lowest possible cost to the manufacturer. If you love music, you deserve better. Name-brand aftermarket speakers deliver fuller, richer sound with considerably more detail and nuance, and they're capable of playing louder and cleaner than factory speakers. Connect new speakers to your factory radio and you'll get the best possible sound from your dealer-equipped system. Pair them up with a new car stereo for a level of enjoyment that can rival a high-fidelity home audio experience.

RetroSound R-69N Reviews

Average Customer Review:

12 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $350 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Great Speaker

Written By John, Massachusetts on Monday, November 16, 2015

Crutchfield Customer Review (What's this?)

Speakers are very clear. Great replacement for original 1998 speakers. Clear and crisp sound. No regrets or problems

Great retro speaker

Written By RickyV, Texas on Monday, September 28, 2015

Crutchfield Customer Review (What's this?)

Great retro speaker for classic cars

Pros: Sounds great

Cons: Mounting holes was a little offset for my classic vehicle, had to modify it

RetroSound R-69N Review

Written By BillW, California on Monday, March 30, 2015

Crutchfield Customer Review (What's this?)

Last year I replaced the ancient AM/FM/cassette deck in my 1964 Plymouth Belvedere with a RetroSound Model One radio. I've really been enjoying the modern radio in my vintage Mopar. About six months ago I replaced the original speaker under the dash with a RetroSound R-48N dual-voice speaker. That provided much-improved sound quality. I am in the process of redoing some of the interior in the car. Since I had the rear seat and package tray out of the car, I decided to take advantage of the rear access and replace the 20+ year-old pair of cheapo speakers in the rear with a RetroSound R-69N 6x9-inch, dual-voice speaker mounted under the center of the new package tray. I ordered the speaker from Crutchfield, who in turn forwarded my order to RetroSound. I received the new speaker the very next day! You can't get any better service than that! The new speaker's mounting holes lined up perfectly with the factory mounting opening under the package tray support, so it took me about 15 minutes to bolt in the new speaker. The wiring was simple. I just spliced in the wires that came with the speaker to the rear wires I'd installed in the car many years ago. I am definitely not an audiophile, and my car's sound system is pretty basic and low-powered, but I think the R-69N sounds great. It mates up perfectly with the RetroSound Model One, and the available volume is plenty for my needs. RetroSound and Crutchfield are great to deal with. Good products and fast service.

Pros: The speaker is cool looking with chromed frame. It was a shame to have to hide it under the package tray. The speaker is relatively shallow, so it will fit into the tight confines under a dashboard or other places. The speaker is very nicely made and provides excellent performance for the price.

Cons: Can't think of any cons about the speaker.

excellent speaker

Written By Bob, 32680 on Thursday, November 27, 2014

Crutchfield Customer Review (What's this?)

Excellent speaker fit well in the dash of my truck sounds great.

Pros: Perfect for old cars

Cons: None

Retrosound 6X9 Speaker

Written By Jim R, SAnford NC on Sunday, August 10, 2014

Crutchfield Customer Review (What's this?)

Nice low profile, fit perfectly in the old car I was upgrading sound in.

Pros: Great instructions for varying impedence! Very clear. This speaker is very versatile.

Cons: None. Just a little trebley.

Nice speaker for old car

Written By Sunshine, Louisiana on Tuesday, August 13, 2013

Crutchfield Customer Review (What's this?)

Works good in old Pontiac

Pros: Works

Cons: None that I see

RetroSound R-69N

Written By Adogman, Calif on Tuesday, April 16, 2013

Crutchfield Customer Review (What's this?)

Product was as described. Installed easily. Good sound.

Mr. Hooyah

Written By Hooyah, Bridgeport, CT on Thursday, December 13, 2012

Crutchfield Customer Review (What's this?)

I purchased a pair of these speakers for a 2008 Nissan Sentra to go in the front door openeings and they fit prefectly even in this car. Thesound quality is excellent and they are a incredible upgrade from any factory they arent the best speakers but they are very nice. The sound is evenly matched to my back JVC 6x9's which can handle up to 330W max but have a higher RMS at 100. The sound is crisp as well as clear and maintains in tact even at very high volumes or during big bass excursions. I highly recommend these for highs and maybe mids at an entry level but work best with a complete 4 channel system upgrade as the replacement for vocal speakers. They offer so so bass so dont expect to get a pounding from these but are overall a very nice choice for any car that can hold a 6x9.

Pros: Excellent speaker for high tones and notes as well as maintains consistency thru high levels of bass

Cons: Doesnt provide much bass by itself

Jaguar Vanden Plas

Written By tj, Palatine Il on Saturday, June 02, 2012

Crutchfield Customer Review (What's this?)

I installed this dual core speaker in my 98 Vanden Plas due to factory oem speaker had blown i had and upholstery shop nearby to fit it my car had a dual core subwoofer on rear parcel however i needed a slim one as far as depth due to very tight area over gas tank .....this speaker worked perfectly however the bass could be better but at lower levels it works just fine so this speaker is great if bass was a little tighter i would give five stars

Pros: Great Dual core output

Cons: needs a little tighter bass

RetroSound R-69N

Written By Mulch, Yorba Linda, CA on Friday, September 09, 2011

Crutchfield Customer Review (What's this?)

I installed a 6x9 and 4x10 speaker in my 67 Fury convertible, one in the dash and the other in the back seat. Both fit perfect and sound great. These speakers were the solution to my desire to install a modern stereo unit and use the original speaker locations in a car that originally had a mono system . This can present a real problem in classic cars, many of which have very little room under the dash. They can be used in either stereo or mono mode, giving you the flexibility to install the system that suits your sound needs best. I recommend these speakers to anyone who wants to keep the original look of their classic wheels while utilizing modern audio technology.

oversize housing at mounting plane can make for a difficult fit

Written By Jonathan, Albany, CA on Sunday, May 01, 2011

Crutchfield Customer Review (What's this?)

I purchased this for my 1991 Honda Accord LX wagon, which comes with a 6x9 bass speaker at the very rear of the car on the driver's side. The stamped steel frame of this speaker is unnecessarily large in dimension right where it transitions to the mounting plane, making it too large (by just 1/16") to fit in the standard 6"x9" relief well, into which any other typical 6"x9" speaker would fit just fine. If you have a difficult-to-modify relief well opening (the Honda's is steel, and indeed difficult to modify), think twice before purchasing this speaker. Sound quality is passable, but not impressive in any way.

The Crutchfield site does not acknowledge the wagon as one of the available Honda Accord LX body styles for 1991. The wagon has different speaker sizes in the rear than either the Accord sedan or coupe - would be great if they updated their site to include the wagons.

Retrosound observations

Written By editmon, Georgia on Friday, June 04, 2010

Crutchfield Customer Review (What's this?)

I purchased this speaker as a replacement for the single rear dual voice coil in my Honda 94 Accord Wagon. Crutchfield do not recommend this unit because of fit and for someone not familiar with tools that is correct. I have the speaker in the car and it works great. The catch? You have to work a little to get the fit. Tools are Dremel, screw driver, soldering gun, and 4 two inch machine screws with same threading as originals. Time if you review job before work about 1 hour or less. You have to cut the mount tabs on the left and right of speaker off and trim out a little of the interior wall material where the speaker mounts. I used factory wiring and tack soldered connections.

Hands-on research

What's in the box?

Download owner's manual

  • One 2-way 6x9 stereo input DVC speaker
  • 12' Length of speaker wire
  • Eight 1-1/8" Self tapping screws
  • 8 Speed clips
  • Owner's manual

Features and Specs

Design 2-way
Tweeter Design Dual Dome
Tweeter Composition Mylar
Woofer Composition Pulp Composite
Woofer Surround Santoprene
Parts Warranty 1 Year
Labor Warranty 1 Year
Sensitivity 90 dB at 1 watt
Frequency Response 40 - 21k Hz
RMS Power Range (Watts) 2-100
Peak Power Handling (Watts) 200
Impedance (Ohms) 4
Top-mount Depth (Inches) 1 13/16
Bottom-mount Depth (Inches) 2 1/4

Product Research


Woofer: The speaker features a rigid pulp composite cone woofer with a Santoprene surround. The woofer uses a Neodymium magnet to achieve its shallow depth, so it fits in tight factory locations.

Tweeters: Two Mylar tweeters are wired separately so this single speaker will accept a stereo input.

Dual Voice Coils: The woofer has dual voice coils, each wired with one of the tweeters. The stereo input is useful in many older cars with a single speaker location in the dash or rear deck. If used in a standard two speaker application the inputs should be wired in parallel (to present a 2Ω load) or series (to present an 8Ω load).

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Product reviews from the Crutchfield Labs

If you've ever tried to install a modern car stereo in a pre-1960s vintage automobile, you know how challenging it can be to get stereo sound into a vehicle with one center dash speaker. These...

What are the Labs?