Retrosound R-69N

Single 6"x9" 2-way car speaker with dual voice coils

Item #: 068R69N

In Stock

9 Reviews | Ask Questions

Free Installation gear for most cars

Your price: $75.99 each Earn up to 76 Rewards points

Add to Cart Free Shipping Lifetime Tech Support

+ Add to wishlist + Email me alerts for this product

Ships Free From Manufacturer

View all associated offers




Does it fit my car?

Select your car

Find what fits your car

Retrosound R-69N

One classic speaker

Retrosound makes it easy to replace the factory speakers in almost any classic, vintage, or even new car. Their RetroMod Series speakers feature extremely shallow chrome baskets designed to fit into a wide variety of standard speaker locations. They may look old school, but Retrosound builds their speakers from the ground up, using the latest techniques and materials.

The single R-69N 6"x9" speaker is designed for a classic car with only one speaker opening on its dash or rear deck. The woofer features dual voice coils, each one connected to its own tweeter. Your stereo receiver connects to both voice coils, so you get a stereo mix from a single speaker. In effect, you get two 2-way speakers in one frame, for modern sound in your vintage application.

The R-69N speaker features a powerful neodymium magnet and a low-carbon steel chrome frame that form a strong foundation. The sturdy pulp composite woofer with its Santoprene surround delivers powerful performance while standing up to heat and humidity. The two Mylar dome tweeters broadcast detailed highs without sounding shrill, and their low profile helps increase installation options.

Although efficient enough to play well with any receiver alone, this RetroMod speaker can handle the high power from aftermarket amplifiers. Replace that wornout old 6"x9" with this updated Retrosound, and your tunes will sound new again, just like your classic ride.

Important Note: This is a single 6"x9" speaker, so you'll need to purchase a pair for vehicles with two 6"x9" openings.

Priced per single speaker

Product Highlights:

  • single 6"x9"" 2-way speaker
  • pulp composite woofer cone with Santoprene surround
  • dual voice coils for 2-channel operation
  • dual mylar dome tweeters
  • power range: 2-100 watts RMS (200 watts peak power)
  • frequency response: 40-21,000 Hz
  • sensitivity: 90 dB
  • top-mount depth: 1-13/16"
  • grille not included
  • warranty: 1 year
  • Our 60-day money-back guarantee

Why replace your car's original speakers?

The speakers that originally came in your car were made from inexpensive materials, designed to create acceptable sound at the lowest possible cost to the manufacturer. If you love music, you deserve better. Name-brand aftermarket speakers deliver fuller, richer sound with considerably more detail and nuance, and they're capable of playing louder and cleaner than factory speakers. Connect new speakers to your factory radio and you'll get the best possible sound from your dealer-equipped system. Pair them up with a new car stereo for a level of enjoyment that can rival a high-fidelity home audio experience.

Hands-on research

What's in the box?

Download owner's manual

  • One 2-way 6x9 stereo input DVC speaker
  • 12' Length of speaker wire
  • Eight 1-1/8" Self tapping screws
  • 8 Speed clips
  • Owner's manual

Features and Specs

Design 2-way
Tweeter Design Dual Dome
Tweeter Composition Mylar
Woofer Composition Pulp Composite
Woofer Surround Santoprene
Parts Warranty 1 Year
Labor Warranty 1 Year
Sensitivity 90 dB at 1 watt
Frequency Response 40 - 21k Hz
RMS Power Range (Watts) 2-100
Peak Power Handling (Watts) 200
Impedance (Ohms) 4
Top-mount Depth (Inches) 1 13/16
Bottom-mount Depth (Inches) 2 1/4

Product Research


Woofer: The speaker features a rigid pulp composite cone woofer with a Santoprene surround. The woofer uses a Neodymium magnet to achieve its shallow depth, so it fits in tight factory locations.

Tweeters: Two Mylar tweeters are wired separately so this single speaker will accept a stereo input.

Dual Voice Coils: The woofer has dual voice coils, each wired with one of the tweeters. The stereo input is useful in many older cars with a single speaker location in the dash or rear deck. If used in a standard two speaker application the inputs should be wired in parallel (to present a 2Ω load) or series (to present an 8Ω load).

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Retrosound R-69N Reviews

Average Customer Review:

9 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

excellent speaker

Written By Bob, 32680 on Thursday, November 27, 2014

Crutchfield Customer Review (What's this?)

Excellent speaker fit well in the dash of my truck sounds great.

Pros: Perfect for old cars

Cons: None

Retrosound 6X9 Speaker

Written By Jim R, SAnford NC on Sunday, August 10, 2014

Crutchfield Customer Review (What's this?)

Nice low profile, fit perfectly in the old car I was upgrading sound in.

Pros: Great instructions for varying impedence! Very clear. This speaker is very versatile.

Cons: None. Just a little trebley.

Nice speaker for old car

Written By Sunshine, Louisiana on Tuesday, August 13, 2013

Crutchfield Customer Review (What's this?)

Works good in old Pontiac

Pros: Works

Cons: None that I see

Retrosound R-69N

Written By Adogman, Calif on Tuesday, April 16, 2013

Crutchfield Customer Review (What's this?)

Product was as described. Installed easily. Good sound.

Mr. Hooyah

Written By Hooyah, Bridgeport, CT on Thursday, December 13, 2012

Crutchfield Customer Review (What's this?)

I purchased a pair of these speakers for a 2008 Nissan Sentra to go in the front door openeings and they fit prefectly even in this car. Thesound quality is excellent and they are a incredible upgrade from any factory they arent the best speakers but they are very nice. The sound is evenly matched to my back JVC 6x9's which can handle up to 330W max but have a higher RMS at 100. The sound is crisp as well as clear and maintains in tact even at very high volumes or during big bass excursions. I highly recommend these for highs and maybe mids at an entry level but work best with a complete 4 channel system upgrade as the replacement for vocal speakers. They offer so so bass so dont expect to get a pounding from these but are overall a very nice choice for any car that can hold a 6x9.

Pros: Excellent speaker for high tones and notes as well as maintains consistency thru high levels of bass

Cons: Doesnt provide much bass by itself

Jaguar Vanden Plas

Written By tj, Palatine Il on Saturday, June 02, 2012

Crutchfield Customer Review (What's this?)

I installed this dual core speaker in my 98 Vanden Plas due to factory oem speaker had blown i had and upholstery shop nearby to fit it my car had a dual core subwoofer on rear parcel however i needed a slim one as far as depth due to very tight area over gas tank .....this speaker worked perfectly however the bass could be better but at lower levels it works just fine so this speaker is great if bass was a little tighter i would give five stars

Pros: Great Dual core output

Cons: needs a little tighter bass

Retrosound R-69N

Written By Mulch, Yorba Linda, CA on Friday, September 09, 2011

Crutchfield Customer Review (What's this?)

I installed a 6x9 and 4x10 speaker in my 67 Fury convertible, one in the dash and the other in the back seat. Both fit perfect and sound great. These speakers were the solution to my desire to install a modern stereo unit and use the original speaker locations in a car that originally had a mono system . This can present a real problem in classic cars, many of which have very little room under the dash. They can be used in either stereo or mono mode, giving you the flexibility to install the system that suits your sound needs best. I recommend these speakers to anyone who wants to keep the original look of their classic wheels while utilizing modern audio technology.

oversize housing at mounting plane can make for a difficult fit

Written By Jonathan, Albany, CA on Sunday, May 01, 2011

Crutchfield Customer Review (What's this?)

I purchased this for my 1991 Honda Accord LX wagon, which comes with a 6x9 bass speaker at the very rear of the car on the driver's side. The stamped steel frame of this speaker is unnecessarily large in dimension right where it transitions to the mounting plane, making it too large (by just 1/16") to fit in the standard 6"x9" relief well, into which any other typical 6"x9" speaker would fit just fine. If you have a difficult-to-modify relief well opening (the Honda's is steel, and indeed difficult to modify), think twice before purchasing this speaker. Sound quality is passable, but not impressive in any way.

The Crutchfield site does not acknowledge the wagon as one of the available Honda Accord LX body styles for 1991. The wagon has different speaker sizes in the rear than either the Accord sedan or coupe - would be great if they updated their site to include the wagons.

Retrosound observations

Written By editmon, Georgia on Friday, June 04, 2010

Crutchfield Customer Review (What's this?)

I purchased this speaker as a replacement for the single rear dual voice coil in my Honda 94 Accord Wagon. Crutchfield do not recommend this unit because of fit and for someone not familiar with tools that is correct. I have the speaker in the car and it works great. The catch? You have to work a little to get the fit. Tools are Dremel, screw driver, soldering gun, and 4 two inch machine screws with same threading as originals. Time if you review job before work about 1 hour or less. You have to cut the mount tabs on the left and right of speaker off and trim out a little of the interior wall material where the speaker mounts. I used factory wiring and tack soldered connections.

Get everything you’ll need to enjoy your new Retrosound R-69N

Reduce ambient road noise and your vehicle's "rattles," for better sound inside your car.
You'll need speaker wire to connect your speakers to your amp.
Keep your speakers clean and dry. They compress to fit behind your speakers.
These speaker connectors are handy if you're running new speaker wire or if your speakers have oversized terminals.
The right tools will help keep your installation simple and clean.
Dynamat 10415 Xtreme Speaker Kit

Dynamat 10415 Xtreme Speaker Kit

Two 10-in. x 10-in. Sheets

Item #: 15410415


Add to Cart
Dynamat 10435 Xtreme Door Kit

Dynamat 10435 Xtreme Door Kit

With four 12" x 36" sheets — covers two doors

Item #: 15410435


Add to Cart
Dynamat SuperLite Tri-Pak

Dynamat SuperLite Tri-Pak

Triple package — 3 sheets, 12 square feet (Model #10612)

Item #: 15410612


Add to Cart
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1


T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1


Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B


Boom Mat 6

Boom Mat 6"x9" Speaker Baffles

Protect your speakers
Regular and slim-line sizes (Regular: 4-1/2" depth)

Item #: 696B050380


Add to Cart

XTC 6"x9" Speaker Baffles

Protect your speakers (5" depth)

Item #: 237XT69


Add to Cart
Metra Female Quick Slides

Metra Female Quick Slides

An assortment of female quick slide connectors for connecting to speaker terminals

Item #: 120FQS10PK


Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT


Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100


Add to Cart
S&G Tool Aid 87615

S&G Tool Aid 87615

Window and Door Clip Removal Tool

Item #: 18187615


S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650


Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL


Add to Cart
Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042


Add to Cart
Spec Tools SQR-200a Squeeze Wrench

Spec Tools SQR-200a Squeeze Wrench

Narrow space ratchet kit with 18 sockets

Item #: 180SQR200A


Add to Cart
Install Bay IB35400

Install Bay IB35400

Premium door panel and trim tool

Item #: 12035400

Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL


Add to Cart
Install Bay 3320

Install Bay 3320

Auto-ranging digital multimeter

Item #: 1203320

Add to Cart
Posi-Products™ Car Speaker Connectors

Posi-Products™ Car Speaker Connectors

8 connectors for installing car speakers

Item #: 669PP502


Add to Cart
DEI Heat Shrink Tubing

DEI Heat Shrink Tubing

Black 4-foot length (Assortment)

Item #: 696010839


Add to Cart

Questions & Answers Ask the community. Share your knowledge.