Skip Navigation

RetroSound R-C652N

RetroMod™ 6-3/4" component speaker system

1 Review | 1 question - 1 answer

Item #: 068RC652N

In Stock

Add to Cart

Ships Free From Manufacturer

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Add to Cart

RetroSound R-C652N

Overview

Our take on the RetroSound R-C652N

RetroSound makes it easy to replace the factory speakers in almost any car — classic, vintage, or even brand new. Their RetroMod Series speakers feature extremely shallow baskets designed to fit into a wide variety of standard speaker locations. They may look old school, but RetroSound builds their speakers from the ground up, using the latest techniques and materials.

Retrosound R-C652N

The right speakers for your vintage vehicle

RetroSound makes it easy to replace the factory speakers in almost any car — classic, vintage, or even brand new. Their RetroMod Series speakers feature extremely shallow baskets designed to fit into a wide variety of standard speaker locations. They may look old school, but RetroSound builds their speakers from the ground up, using the latest techniques and materials.

Sturdy materials, detailed sound

Each R-C652N 6-3/4" woofer features a powerful neodymium magnet and a low-carbon steel frame that form a strong foundation. The rigid polypropylene cone with its Santoprene surround delivers powerful performance while standing up to moisture and humidity. The separate silk dome tweeter broadcasts detailed highs without sounding shrill, and it comes with flush or surface mounting options. The water-resistant external crossover keeps any moisture in your doors away from its sensitive electronics. 

Although efficient enough to play well with any receiver alone, these RetroMod speakers can handle the high power from aftermarket amplifiers to deliver your music with plenty of impact. 6-3/4" speakers first appeared in the doors of many 80's vehicles. Replace them with these up-to-date RetroSounds, and your tunes will sound new again, just like your classic ride.

Note: RetroSound describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake, we list it as a 6-3/4" speaker.

Installation note: In many cases, you'll need a pair of our universal backstraps to install the tweeters.

What's in the Box:

  • 2 Woofers
  • 2 Tweeters (each has attached 9" speaker leads with bullet connectors)
  • 2 Woofer grilles
  • 2 Grille frames
  • Grille putty
  • 2 Crossovers
  • 2 Flush-mount tweeter housings
  • 2 Flush-mount securing rings
  • 2 Surface-mount housings
  • Four 5/8" Self-tapping flat head screws
  • Owner's manual

Product Highlights:

  • component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
  • 6-3/4" water-resistant polypropylene woofers with Santoprene surround
  • silk dome tweeters
  • water-resistant external crossover network with 3 tweeter levels (0, -3, -6 dB)
  • power range: 2-85 watts RMS (150 watts peak power)
  • frequency response: 52-21,000 Hz
  • sensitivity: 89 dB
  • woofer top-mount depth: 2-1/8"
  • grilles are included
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

RetroSound R-C652N Reviews

Average Customer Review:

1 Review

Great components and other Crutchfield gear in a 2013 Jeep Wrangler Un

John U from Kenosha, Wi on 8/13/2013

My Daughter just started driving and she wanted a Jeep. So a few months back we got her a 2013 Jeep Wrangler unlimited. Last weekend I had our local audio shop install all Crutchfield sourced gear into her Jeep. Head unit: Alpine 927 Navigation, Alpine 5 channel amp, JL Stealth box w/ 13" slim woofer, Retrosound component kit, Retrosound 652N 6.5" speakers, and the shop supplied the hard work to put it in--- also got from crutchfield the back up camera, and they recommended a special package and interface so she gets to keep her steering wheel controls, the installer had no problems putting the gear in, and all the crutchfield gear fit and worked flawlessly. I'm writing this review because I want everyone to know how darn good these component speakers sounded, I use Retrosound gear in all my classic cars ( 66 VW bug & 66 Mustang) --- WOW, I was blown away, how nice these sounded, the combo of the stealth box, amp and these components with the Retrosound 6.5" were downright breathtaking--- truly the best system I have ever heard in a car. a night and day upgrade from the gutless factory system. Kudos need to go to crutchfield for making sure I had all the wiring and interfaces to do the install myself (which would never happen in these newer cars)--- my installer was impressed with what Crutchfield supplied (apparently here in Wisconsin, they're a bit behind with some of the new car tech). I'm just plain jealous now! --- John

Pros: I have to say, when it comes to selling radios for new cars, crutchfield is on the ball, their website and phone service Rocks! they've always been spot on when I've purchased my Retrosound products, but now I'll go this route too for my newer cars--- Car stereo is still alive!!

Cons: Pricing was fair, their RCA cable selection seemed a bit sparse, so I had to get them locally, but that's really the only con i have.

Details

Hands-on research

Features and Specs

General
Speaker Size 6 3/4
Design 2-way
Tweeter Design Dome
Tweeter Composition Silk
Woofer Composition Polypropylene
Woofer Surround Santoprene
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity 89 dB
Frequency Response 52 - 21k Hz
Minimum RMS Wattage 2
Maximum RMS Wattage 85
Peak Power Handling (Watts) 150
Impedance (Ohms) 4
Top-mount Depth (Inches) 2 1/8
Bottom-mount Depth (Inches) 2 5/16
Cutout Diameter or Length (inches) 5 11/16

Product Research

Features

Water Resistant: The woofers, tweeters, and crossovers are water resistant, so they can be installed in doors, kick panels, and any other area that might be susceptible to leaks.

Woofer Mounting: Although these speakers are marketed as 6-1/2", they will not fit in standard 6-1/2" speaker openings (approximately 5" diameter). Crutchfield has traditionally referred to this size speaker as a 6-3/4" (approximately 5-5/8" diameter cutout required).

Tweeter Mounting: The tweeters can be surface or flush mounted using the included housings. In either housing the tweeter's mounting angle is adjustable to improve imaging.

Mounting Dimensions:

  Surface Mount Flush Mount
Mounting Height 1.657" 0.326"
Depth 0.5" (screw depth) 0.77"
Frame Diameter N/A 2.116"
Cutout Diameter N/A 1.825"
Frame Width 1.812" N/A
Frame Length 1.823" N/A

Crossovers: The crossovers' input and output wires are attached. The 18" woofer output wires are terminated with female quick slides that plug directly onto the woofer terminals. The 18" tweeter output wires are terminated with bullet connectors that mate with the wire attached to the tweeters. The 16" input wires are terminated with 0.25" male quick slides. The crossovers have three tweeter output level options, -6 dB, -3 dB, and 0 dB (flat). The crossovers also have an electronic tweeter protection circuit to minimize the possibility of failure.

Crossover Dimensions:

  • Width: 3-5/8"
  • Height: 1-1/2"
  • Depth: 3-1/4"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Staff Reviews

Product reviews from the Crutchfield Labs

What are the Labs?
Q & A

Customer Q&A

1 question already asked

The actual physical tweeter size isn't provided, but when using the included surface-mount housings, the tweeters have a 1.812" diameter; and when using the flush-mount housings the diameter is 2.116". I hope that helps. My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=159 [ Larry  Mar 07, 2016 ]  Staff
Library