Chat
Contact us
Close contact box
Connect ID #
438 197 797 4
Connect ID #
438 197 797 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

RetroSound RPOD6 Surface-mount modules for 5-1/4" or 6-1/2" speakers

Item # 068RPOD6

You've got a classic vehicle that needs some music in it, but your vehicle didn't include factory speaker...

You've got a classic vehicle that needs some music in it, but your vehicle didn't include factory speaker...

10 questions - 19 answers

Item # 068RPOD6

Shop all RetroSound Custom Panels without Speakers

About the RetroSound RPOD6

Dave Delamere

Where no speaker has gone before

You've got a classic vehicle that needs some music in it, but your vehicle didn't include factory speaker locations, and there's no room behind the factory panels for installing new speakers. Enter Retrosound's RetroPod modules.

Where no speaker has gone before

You've got a classic vehicle that needs some music in it, but your vehicle didn't include factory speaker locations, and there's no room behind the factory panels for installing new speakers. Enter Retrosound's RetroPod modules.

The RetroPod RPOD6 surface-mount module lets you choose the locations for new speakers in your vehicle. Mount the two modules on your kick panels, doors, rear deck, or any suitable flat surface, then run some speaker wire to your car stereo or amplifier. You can then install your choice of 5-1/4" or 6-1/2" speakers in the modules.

Customize your application

You can paint or carpet the ABS plastic modules to match your interior. The modules also include mesh grilles to complete the installation.

Installation note: Using the template that Retrosound provides in the modules, you'll need to cut and file the mounting hole in the modules for the speakers you install. You'll also need to drill mounting holes for screws that secure the speakers. The mounting tabs on the rear of the modules are also made of ABS plastic. You'll want to consider professional installation if you don't have the proper tools.

READ LESS

Product highlights:

  • two RetroPod speaker modules for 5-1/4" or 6-1/2" speakers
  • paintable rugged ABS plastic
  • mesh grilles included
  • warranty: 1 year
  • MFR # RPOD6

What's in the box:

  • 2 RetroPod modules
  • 2 Grilles
  • Instructions

Customer reviews for RetroSound RPOD6

Loading reviews...

Average review:

4.5 out of 5 stars
46 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the RetroSound RPOD6

Pat M.

Product Research

Features

Overview: RetroSound's R-POD6 surface-mount modules offer an easy way to add speakers to non-factory locations. They are mounted using screws (not included) to secure four ABS plastic tabs on the under side of the module to a flat surface (approximately 9-1/4" diameter minimum) in the vehicle.

Installation: You will need to cut out the speaker mounting holes in the ABS plastic R-POD6. Three circular lines are scored on the speaker mounting surface, designed for 5-1/4, 6-1/2, and 6-3/4 speakers (diameters are 4.6, 5.2, and 5.7 inches respectively, be sure to measure your specific speakers before cutting). Because the R-POD is angled (approximately 10°), the exact allowable mounting depth varies with size and shape of the speaker basket. The depth is 2-1/16 inches at the center of the opening, so the allowable depth of a typical speaker is approximately 1-3/4 inches. Using the included grilles, there is approximately 3/4 of an inch allowable mounting height and the frame diameter of the speakers should not exceed 6.7 inches. Once the hole is cut for the speaker, the four mounting tabs are accessible through the opening.

Compatibility: RetroSound recommends using their R-525N, R-652N, or R-612 speakers with the R-POD6, but other brand speakers can also be used.

Loading accessories...

Customer Q&A

10 questions already asked

Q
Are these weather proof? Was thinking of using these to Mount marine speakers on the side of my RV
tim  Mar 25, 2021
1 answer
A
Yes. I too mounted them on the side of my RV. They work great. Easy to paint as well. Happy with my purchase.
jake  Mar 25, 2021
Q
Can these fit 6 inch speakers?
fredrick  Aug 31, 2020
2 answers
A
hello, I used these for 6 inch speakers. you will have to cut a hole for the voice coil(magnet). it is easy to cut and then use the supplied hardware that comes with your speakers. Take Care, Todd
todd  Aug 31, 2020
A
I purchased the RetroSound RPOD6 with a set of Polk Audio DB 652 6 1/2 inch marine speakers. I installed them on the outside of my camper. They fit perfectly. They can be cut to fit either 5.25 or 6.5 inch speakers. Don't know why they couldn't be cut to fit 6 inch speakers.
brian  Aug 31, 2020
Q
Can these fit 6 inch speakers?
fredrick  Aug 31, 2020
2 answers
A
Would not fit my application (vehicle).
jason  Aug 31, 2020
A
They didn't work out for me. I returned them.
ken  Aug 31, 2020
Q
If these are essentially sealed against the mounting surface would this not create a very small enclosure which would affect sound quality? Thanks
nathaniel  Jul 06, 2020
3 answers
A
hi the housing are not sealed in the back just mounting tabs that you can screw to a wall or what ever i just cut the face for the speaker size screw the mount to wall, screw speaker to the frame, snap in the covers & your done i guess all systems are Ok i don't notice or see the speaker or mount i turn on the radio & it plays music. g not real happy on my radio selection but it will do for now, wish they had a return exchange program GOOD LUCK
bill  Jul 07, 2020
A
I installed a set of focals mounted in my rv. The sound is clear with depth great choice
danny  Jul 07, 2020
A
I Installed mine on my golf cart roof inside and they sound fine.
jay  Jul 06, 2020
Q
With Alpine S-S65 speakers fit in these?
jeff  Aug 14, 2019
1 answer
A
They will not, the Alpine S65 need a depth of 2 3/8", while these pod are limited to approximately 1.75".
thomas  Aug 22, 2019 (Staff)
Q
Will my 6.5 pioneer pro speakers fit? The magnet is big
slim216  Apr 23, 2019
1 answer
A
No, they are too deep but not too wide.
gregory  Apr 23, 2019
Q
are the pods black or gray?
david  Dec 18, 2016
7 answers
A
The Speaker Pods are Black.
peter  Dec 20, 2016
A
black..you can paint them whatever
edward  Dec 19, 2016
A
dark gray...almost black
daniel  Dec 19, 2016
A
black
phillip  Dec 19, 2016
A
I used them unpainted, they are black.
scott  Dec 19, 2016
A
Black
david  Dec 19, 2016
A
Pods are black
rick  Dec 19, 2016
Q
Will these accept infinity 6.75 and 6.5s? And my car didnt come with door speakers and this is where i want to put thw 62.11s do i have to cut out the door panel behind the pod?
jai  Mar 08, 2016
1 answer
A
For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to give you the details on if this will fit and what you will need for an installation in your vehicle.
kenneth  Mar 08, 2016 (Staff)
Q
Can these be installed under a 1974 VW dashboard? I don't want to cut into my door panels.
michelle  Jun 17, 2015
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Jun 18, 2015 (Staff)
SHOW MORESHOW LESS

Loading articles...

Compare the sound