About the RetroSound R-TW84-ENCL
A sub box that's only 4" deep
A sub box that's only 4" deep
RetroSound's R-TW84-ENCL enclosure houses their R-TW84 shallow-mount 8" subwoofer in a sealed box that's only four inches deep. The 4-ohm sub features a mica-injected polypropylene cone with a Santoprene surround for distortion-free bass, in a strong cast-aluminum basket for superior accuracy. Neodymium magnets allow high power handling without adding a lot of weight.
This enclosure measures just 15-7/8" x 12-3/4" x 4", perfect for vehicles where space is limited, and it's a perfect match for the sub. The enclosure's MDF construction and carpet covering will withstand the typical bumps and lumps of the road. The enclosure also includes deluxe push terminals and a rugged grille.
Installation Note: You'll need mounting screws to install the sub in its enclosure.
Product highlights:
- sealed MDF enclosure with charcoal carpeting and deluxe speaker terminals
- ultra-thin 8" 4-ohm flat subwoofer
- neodymium magnet structure
- rigid cast aluminum basket
- injected poly mica cone
- Santoprene surround for smooth, natural sound
- 1-3/4" voice coil on a Kapton® former
- power handling: 250 watts RMS/500 watts peak
- enclosure volume: .312 cubic foot
- dimensions: 15-7/8"W x 12-3/4"H x 4"D (4-7/8" w/grille)
- sensitivity: 88 dB
- frequency response: 32-5000 Hz
- warranty: 1 year
- MFR # R-TW84-ENCL
What's in the box:
- One 8" Subwoofer
- Enclosure for a single 8" subwoofer
- Polyester lining (installed)
- Grille
- Owner's manual
Customer reviews for RetroSound R-TW84-ENCL
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the RetroSound R-TW84-ENCL
Features & specs
General | ||
---|---|---|
Woofer Size (inches) | 8 | |
Speakers Per Box | 1 | |
Woofer Material | Injected Poly-Mica | |
Enclosure Type | Sealed | |
Color | Charcoal | |
Pieces in System | 1 | |
Width (inches) | 15-7/8 | |
Height (inches) | 12-3/4 | |
Depth (inches) | 4-7/8 | |
Connector Type | Spring post | |
Frequency Response | 32-5000 Hz | |
Power Range (Watts RMS) | 250 | |
Maximum Wattage | 500 | |
Sensitivity | 88 dB | |
Impedance | 4 ohms | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
Product Research
Features
Overview: This package includes one RetroSound R-TW84 8" subwoofer, the R-TWENCL sealed enclosure designed for that sub, and a protective grille.
Note: The sub is not factory mounted in the enclosure and mounting hardware is not included, so eight mounting screws must be purchased separately. (One option is item number 120HWP0001.)
Materials: The enclosure is built from 1/2" MDF (medium-density fiberboard), covered in charcoal colored carpet.
Internal Box Volume: The enclosure's internal volume is 0.312 cubic feet.
Terminals: The spring-post speaker terminals are mounted on the enclosure's side panel. They will accept bare wire up to 10 gauge, pin connectors, and single banana plugs. Inside the enclosure the terminals have an attached 15" length of speaker wire for connecting the subwoofer.
Brackets: Brackets for securing the enclosure to your vehicle are recommended.
The RetroSound R-TW84-ENCL replaces these items
RetroSound R-TW82-ENCL
- ultra-thin 8" 2-ohm flat subwoofer
- power handling: 250 watts RMS/500 watts peak
- sensitivity: 88 dB
Loading...
Loading accessories...
Customer Q&A
4 questions already asked
Loading...
Loading articles...