About the Axxera AS65C
A fresh look
Axxera includes external crossovers for precise frequency distribution.
A fresh look
Upgrading your car's sound system should be fun, and Axxera brings excitement to the speaker realm with a fresh look and inspired materials. This AS65C 6-3/4" component speaker system is hard to ignore with its big, contoured grilles and cool blue woofer cones, but they're not all flash. Every element contributes to a dynamic, natural sound that's a night-and-day difference from what your factory speakers can produce.
Sound staging
This Axxera component system lets you optimize the sound staging in your car so you'll feel as if the music is playing across your dash. By mounting the separate 1" silk dome tweeters up closer to your ears, you'll gain better stereo separation with more detail. The included passive crossover network directs the right frequencies to the woofer and tweeter.
Minimal distortion
Axxera has made a concerted effort to minimize distortion with these speakers. The woofer features a lightweight yet stiff 3-Layer Honeycomb Glass Fiber cone that delivers high accuracy while minimizing resonances. A cast-aluminum basket provides a rock-solid housing for the woofer, giving the midbass frequencies an extra kick. This system will handle up to 60 watts RMS, so you can add to their mojo by powering them with an amplifier.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
Note: Axxera describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake we list it as a 6-3/4" speaker.
Highlights:
- component system includes 2 woofers, 2 tweeters, and 2 crossovers
- 6-3/4" glass fiber and honeycomb composite woofer cone
- 1" silk dome tweeter
- power range: 2-60 watts RMS (200 watts peak power)
- frequency response: 20-20,000 Hz
- top-mount depth: 2-5/8"
- sensitivity: 89 dB
- impedance: 4 ohms
- grilles included
- warranty: 1 year
- MFR # AS65C
What's in the box:
- Two woofers
- Two tweeters (each with a 30" length of speaker wire attached)
- 2 Flush mount tweeter cups (installed)
- 2 Angled surface mount tweeter adapters
- 2 Crossovers
- 2 Woofer grilles
- 2 Woofer spacer rings
- Four 40" Lengths of speaker wire
- 2 Metal tweeter mounting straps
- 16 Speed clips
- Eight 1-1/4" Self-tapping screws
- Eight 1" Self-tapping screws
- 2 Adhesive backed pads
- Owner's manual
Customer reviews for Axxera AS65C
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Axxera AS65C
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk | |
Woofer Composition | Glass Fiber Honeycomb | |
Woofer Surround | Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 89 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 20 - 20k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 200 | |
Top-mount Depth (Inches) | 2 5/8 | |
Bottom-mount Depth (Inches) | 2 13/16 | |
Cutout Diameter or Length (inches) | 5 11/16 | |
Mounting Height (Inches) | 0.357 | |
Frame Width | 6.523 | |
Frame Length | 6.523 |
Product Research
Features
Woofer Cone: The 3-layer honeycomb glass fiber composite woofer cone is extremely stiff, minimizing resonance and off-axis movement, resulting in less distortion.
Woofer Baskets: The cast aluminum woofer baskets provide a rigid structure for the woofer, and don't resonate like many stamped steel baskets.
Woofer Terminals: The speaker wire is connected to set screw terminals that will accept up to 12-gauge wire.
Tweeter: The laminated silk dome tweeters provide clear treble reproduction and a wide frequency response.
Tweeter Mounting: The tweeters can be flush mounted, surface mounted, or surface mounted at an angle (approximately 45°) using the included adapters.
Tweeter Dimensions:
Flush Mount | Surface Mount | Angled Surface Mount | |
---|---|---|---|
Mounting Height | 0.455" | 1.105" | 1.720" |
Depth | 0.715" | screw depth | screw depth |
Frame Diameter | 2.240" | 1.905" | 1.916" x 2.0" |
Cutout Diameter | 1.910" | N/A | N/A |
Crossover: The input and outputs are screw terminal strips; they will accommodate bare wire or spade connectors up to 0.35" wide. The crossover slope is 12 dB/octave.
Crossover Dimensions:
- Width: 5-1/2"
- Height: 1-7/16"
- Depth: 3-3/4"
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
I installed a pair of these in my car and I'm impressed by the sound stage and clarity, clean mid-bass low distortion. Worth every penny.
Michael from Jamaica, W.I.