Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Power Output: The Axxera AX350DM is a mono subwoofer amp.
The power output is 368 watts RMS into 4Ω (CEA-2006) and 662 watts RMS into
Signal Inputs: In addition to the RCA inputs, a speaker level
input harnesses is included to plug into the high level input port on the amp.
Auto Turn-on: When using a speaker level input, the amp will
turn on automatically when it senses the input signal.
Level Control (Gain): The input level range is 0.25 Volts to
Crossover: Because the AX350DM is a subwoofer amp, the low
pass crossover is always engaged. The crossover point is continuously variable
from 35 to 350 Hz and the slope is 12 dB/octave.
Subsonic Filter: The subsonic crossover point is continuously
variable from 10 to 50 Hz. Like the low pass crossover, the subsonic filter is
always engaged and the slope is 12 dB/octave.
Bass Boost: The bass boost, centered at 45 Hz, is continuously
variable from 0 dB (flat) to +18 dB.
Wired Remote: A wired remote level control is included. The
remote has integrated flanges and screws are included to mount the unit under
the dash. It includes a 15' cable to connect to the amplifier.
Note: The wired remote measures
approximately 1-5/8" wide (2-1/4" including
the mounting flanges) x 1" tall x 1-5/8" deep
(2-1/4" including the knob and cable).
Power Input: Set-screw terminals are provided for connecting
power, ground, and remote turn-on wires. The terminals accept up to 8-gauge wire.
The set screws are tightened/loosened with a Phillips head screw driver (not
Speaker Outputs: One pair of speaker output set-screw
terminals will accept up to 8-gauge wire. The set screws are tightened/loosened
with a Phillips head screw driver (not included).
Line Input: There is one pair of RCA input jacks.
Speaker Level Input: The amplifier has a high level input
port, for use with the included speaker level harness.
Remote: The wired remote cable plugs into the RJ-14 (phone
type) jack on the amp.
Fuses: The amp has two 30-amp ATO fuses.