Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The Dual DC365W is a
single, 2-way rectangular, in-wall speaker, part of the Architectural Series of
speakers. The speakers are designed to work within nearly all interior
decorating schemes where in-wall or flush-mounting is feasible.
Woofers: The DC365W uses a
black 6-1/2" carbon fiber woofer with a Santoprene surround. The speaker is
totally enclosed in a hard plastic enclosure.
Tweeters: The DC365W has a 1"
titanium dome tweeter. The tweeter can be rotated to adjust the angle, up to
The tweeter is wired with a special protection circuitry. The output of the
tweeter can be adjusted, if desired (-3dB, 0dB, +3dB).
Inputs: The speaker's spring
loaded posts will accept pin connectors or bare wire up to 12 gauge.
The speaker terminals are gold plated for corrosion resistance and maximum
Paintable: Both the frame and
grille can be painted to match the ceiling or wall. A plastic paint shield is included to protect
Installation: After a
10-15/16" x 7-1/2" cutout is made (either vertically or horizontally), the speaker is
installed in the hole and held in place by a rugged plastic screw-set bracket.
The only tool required (after the hole is cut) is a #2 Phillips head screwdriver
to tighten the clamps. The clamps spread up to 1.375", so they should cover
almost any application (most drywall is 1/2" thick). The required depth to
install this speaker is 4".