About the Focal Polyglass 130 VRS
Focal's Integration VR Slim component speaker systems use precision craftmanship and advanced materials to make a strong sonic impression. And these systems include shallow-mount woofers that'll fit in the factory speaker locations in a wide range of vehicles.
Shallow-mount woofer with 2-layer cone
The 130 VRS system features a 5-1/4" woofer with a Polyglass cone that's created by depositing a layer of hollow glass microbeads over a layer of cellulose pulp. This unique material combines the warm sound of cellulose with the incredible strength of glass, for a cone that responds rapidly with extremely low resonance. A butyl rubber surround helps control cone movement and promotes high power handling. The zamak (zinc alloy) basket provides a non-magnetic, non-resonant housing that won't color the sound. The woofer measures less than 2 inches deep, so you can count on an easy installation.
Unique tweeter design
Focal designed the aluminum/magnesium inverted dome tweeter to disperse high frequencies evenly for a big, open soundstage. The external 2-way crossover ensures a smooth transition from lows to highs, so vocals and instruments sound natural. You can select from 3 tweeter levels to get the right balance in your vehicle. Grilles are included.
Product highlights:
- 5-1/4" component speaker system (includes 2 woofers, 2 tweeters, 2 crossover networks, and hardware)
- shallow-mount Polyglass woofer with butyl rubber surround
- non-resonant zamak (zinc alloy) basket
- aluminum/magnesium inverted dome tweeter
- outboard crossover with 3-level tweeter control and midrange matching
- grilles included
- 2-50 watts RMS power range (100 watts peak)
- frequency response: 80-28,000 Hz
- sensitivity: 91 dB
- depth: 1-15/16"
- warranty: 1 year
- MFR # 130VRS
What's in the box:
Focal Polyglass 130 VRS owner's manual
- Two 5-1/4" Woofers
- Two inverted dome tweeters (with attached 22" length of speaker wire)
- 2 Tweeter flush mount cups (installed)
- 2 Tweeter angle mount cups
- Tweeter removal tool
- 2 Crossover networks
- 2 Woofer grilles
- 2 Woofer grille mounting rings
- 2 Tweeter flush mount clamps
- 2 Woofer mounting gaskets
- 8 Speed clips
- 2 Machine screws (for flush mounting)
- Four 5/8" Self-tapping screws
- Twelve 1" Self-tapping screws
- Owner's manual (English/ French)
- Focal window sticker
- Serial number card
Featured video:
Customer reviews for Focal Polyglass 130 VRS
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal Polyglass 130 VRS
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | Inverted Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Aluminum/Magnesium | |
Woofer Composition | Polyglass-coated Cellulos | |
Woofer Surround | Butyl Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 91 | |
Frequency Response | 80 - 28k Hz | |
Minimum RMS Wattage | 6 | |
Maximum RMS Wattage | 50 | |
Peak Power Handling (Watts) | 100 | |
Top-mount Depth (Inches) | 1 15/16 | |
Bottom-mount Depth (Inches) | 2 1/8 | |
Cutout Diameter or Length (inches) | 4 9/16 | |
Mounting Height (Inches) | 0.346 | |
Frame Width | 5.133 | |
Frame Length | 5.133 |
Product Research
Woofer
Tweeter
Crossover
Dimensions
Woofer
Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.
Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Zamak Basket: The woofer features a cast Zamak basket. Zamak is a rigid alloy of Zinc, Aluminum, Magnesium, and Copper. Zamak is non-magnetic.
Neodymium Magnets: The speaker uses a Neodymium magnet, which has the same magnetic flux power as a ceramic magnet 10 times its size, reducing the size and weight of the speaker.
Tweeter
Inverted Dome Tweeter: The tweeter is an inverted aluminum/magnesium dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.
Mounting Options: The tweeter can be surface or flush mounted using the included adapters. Focal recommends flush mounting, but the included angled cup allows surface mounting at one of two angles; approximately 10° and approximately 30°.
Crossover
Components: Focal uses audiophile grade polypropylene capacitors and air core inductors to ensure high definition and a dynamic sound quality.
Tweeter Level: You can adjust the output level of the tweeter on the crossover to -6 dB, -3 dB, or 0 dB.
Wiring: The inputs and outputs are screw terminals; they will accept bare wire or spade connectors up to 0.3" wide.
Dimensions
Tweeters:
Flush Mount | Angled Surface Mount | |
---|---|---|
Mounting Height | 0.274" | 1.186" |
Depth | 0.688" (1.01" including screw) | 0.527" (screw depth) |
Frame Diameter | 2.054" | 1.842" |
Cutout Diameter | 1.828" | N/A |
Crossover:
- Width: 2.537"
- Height: 1.246"
- Depth: 4.704"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...