Cone Material: The Dual Fiberglass Structure Membrane (DFS)
is a light, rigid, woven glass fiber woofer cone. The butyl rubber surround is
resistant to ultraviolet rays, temperature extremes, and humidity to add to the
speaker's reliability and longevity.
Phase Plug: The bullet-shaped phase plug in the
center of the woofer ensures a smooth, flat off-axis frequency response by
preventing the higher frequency sound waves emanating from one side of the
cone from interfering with sound waves from the other side of the cone.
Basket: The woofer features an ABS basket reinforced with 20%
Voice Coil: The voice coil is wound around a 1" diameter
low-mass Kapton former, ensuring no coil deformation.
Size Classification Note: Some manufacturers, including Focal,
call this size speaker a 6-1/2". Because it requires a larger cutout than a
standard 6-1/2" speaker, Crutchfield has traditionally referred to this size
woofer as a 6-3/4". Please refer to the Crutchfield Vehicle Selector to confirm
fit in your vehicle.
Inverted Dome Tweeter: The tweeter is an inverted aluminum
dome, producing a broad sound stage. The tweeter has a Neodymium magnet to
provide a powerful magnetic field for the voice coil, while still maintaining
the tweeter's compact dimensions.
Mounting Options: The tweeter can be surface or flush mounted
using the included adapters. Focal recommends flush mounting, but the included
angled cup allows surface mounting at approximately 20° or approximately 40°.
The top of the angle mount cup and the bottom of the flush mount cup can be
combined to create another surface mount (non-angled).
Components: Focal uses audiophile grade polypropylene
capacitors and air core inductors to ensure high definition and a dynamic sound
Tweeter Level: You can adjust the output level of the tweeter
on the crossover to -6 dB, -3 dB, or 0 dB.
Crossover Slopes: The crossover uses 2nd order, 12 dB per
octave low-pass and high-pass filters. The crossover frequency for both is 5,000
Wiring: The inputs and outputs are screw terminals; they
will accept bare wire or spade connectors up to 0.3" wide.
||20° Surface Mount
||40° Surface Mount
||0.667" (screw depth)
||0.675" (screw depth)
||0.675" (screw depth)
- Width: 3.16"
- Height: 1.375"
- Depth: 4.515"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.