Cone Material: The Dual Fiberglass Structure Membrane (DFS)
is a light, rigid, woven glass fiber woofer cone. The butyl rubber surround is
resistant to ultraviolet rays, temperature extremes, and humidity to add to the
speaker's reliability and longevity.
Basket: The woofer features an ABS basket reinforced with 20%
Voice Coil: The voice coil is wound around a 1" diameter
low-mass Kapton former, ensuring no coil deformation.
Size Classification Note: Some manufacturers, including Focal,
call this size speaker a 6-1/2". Because it requires a larger cutout than a
standard 6-1/2" speaker, Crutchfield has traditionally referred to this size
woofer as a 6-3/4". Please refer to the Crutchfield Vehicle Selector to confirm
fit in your vehicle.
Cone: Like the woofer, the midrange uses a DFS cone and
butyl rubber surround.
Size: The midrange drivers are not a standard size, Focal
calls them 3". They can be top or bottom mounted and have these dimensions:
- Depth (top mount): 1.706"
- Mounting height: 0.25"
- Flange height: 0.181"
- Depth (bottom mount): 1.887"
- Tweeter protrusion: 0.069"
- Cutout diameter: 2.991"
- Frame diameter: 3.706"
Terminals: The inputs are quick slide terminals; 0.187"
(+) and 0.110" (-).
Inverted Dome Tweeter: The tweeter is an inverted aluminum
and magnesium dome, producing a broad sound stage. The tweeter has a Neodymium
magnet to provide a powerful magnetic field for the voice coil, while still
maintaining the tweeter's compact dimensions.
Mounting Options: The tweeter can be surface or flush mounted
using the included adapters. Focal recommends flush mounting, but the included
angled cup allows surface mounting at approximately 20° or approximately 40°.
The top of the angle mount cup and the bottom of the flush mount cup can be
combined to create another surface mount (non-angled).
Components: Focal uses audiophile grade polypropylene
capacitors and air core inductors to ensure high definition and a dynamic
Tweeter Level: You can adjust the output level of the
tweeter on the crossover to -3 dB, 0 dB, or +3 dB.
Crossover Specs: The crossover uses 2nd order, 12 dB per
octave high-pass, low-pass, and band-pass filters. The crossover points are 450
Hz and 3,500 Hz.
Wiring: The inputs and outputs are screw terminals; they
will accept bare wire or spade connectors up to 0.3" wide.
||20° Surface Mount
||40° Surface Mount
||0.667" (screw depth)
||0.675" (screw depth)
||0.675" (screw depth)
- Width: 3-1/2"
- Height: 1-9/16"
- Depth: 5-1/2"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.