About the Focal Polyglass 165 VR3
Focal's 3-way Polyglass VR3 component speaker system uses precision craftmanship and advanced materials to make a strong sonic impression. The system includes two 6-3/4" woofers, two 4" midrange drivers, two tweeters, two external crossovers, and assorted hardware.
2-layer woofer cone
The 165 VR3 system features a 6-3/4" woofer with a Polyglass cone that's created by depositing a layer of hollow glass microbeads over a layer of cellulose pulp. This unique material combines the warm sound of cellulose with the incredible strength of glass, for a cone that responds rapidly with extremely low resonance. A butyl rubber surround helps control cone movement and promotes high power handling. The zamak (zinc alloy) basket provides a non-magnetic, non-resonant housing that won't color the sound.
Unique tweeter design
Focal designed the aluminum/magnesium inverted dome tweeter to disperse high frequencies evenly for a big, open soundstage. The external 2-way crossover ensures a smooth transition from lows to highs, so vocals and instruments sound natural. You can select from 3 tweeter levels to get the right balance in your vehicle.
4" midrange speaker
The shallow-mount 4" midrange driver, identical in construction to the woofer, adds focus and detail. Mount the midrange and tweeter as close to ear level as possible in your vehicle, and enjoy the powerful soundstage created by these precision speakers.
Note: This component speaker set consists of a separate woofer, midrange speaker, and tweeter. Our Car Selector checks to make sure the woofer will fit in your factory location. You'll have to custom install the midrange and tweeter.
Note: Focal describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake we list it as a 6-3/4" speaker.
Product highlights:
- 3-way component speaker system (includes 2 woofers, 2 midrange drivers, 2 tweeters, 2 crossover networks, and hardware)
- 6-3/4" Polyglass woofer with butyl rubber surround
- 4" Polyglass midrange with butyl rubber surround
- non-resonant zamak (zinc alloy) basket for woofer and midrange
- aluminum/magnesium inverted dome tweeter
- outboard crossover with 3-level tweeter control
- 4-ohm total impedance
- grilles included
- 6-80 watts RMS power range (160 watts peak)
- frequency response: 55-28,000 Hz
- sensitivity: 93 dB
- depth: 2-11/16" (woofer); 1-9/16" (midrange)
- warranty: 1 year
- MFR # 165VR3
What's in the box:
Focal Polyglass 165 VR3 owner's manual
- Two 6-3/4" Woofers
- Two 4" Midrange
- Two inverted dome tweeters (with attached 22" length of speaker wire)
- 2 Tweeter flush mount cups (installed)
- 2 Tweeter angle mount adapters
- 2 Crossover networks
- 2 Woofer grilles
- 2 Woofer grille mounting rings
- 2 Midrange grilles
- 2 Midrange grille mounting rings
- 2 Woofer mounting gaskets
- 2 Midrange mounting gaskets
- 16 Speed clips
- 4 Machine screws (for flush mounting tweeters)
- Eight 5/8" Self-tapping screws
- Twenty-four 1" Self-tapping screws
- Owner's manual (English/ French)
- Serial number card
Customer reviews for Focal Polyglass 165 VR3
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal Polyglass 165 VR3
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 3-way | |
Tweeter Design | 1-3/4" Inverted Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Aluminum/Magnesium | |
Woofer Composition | Polyglass-coated Cellulos | |
Woofer Surround | Butyl Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 93 | |
Frequency Response | 55 - 28k Hz | |
Minimum RMS Wattage | 6 | |
Maximum RMS Wattage | 80 | |
Peak Power Handling (Watts) | 160 | |
Top-mount Depth (Inches) | 2 11/16 | |
Bottom-mount Depth (Inches) | 2 7/8 | |
Cutout Diameter or Length (inches) | 5 9/16 | |
Mounting Height (Inches) | 0.403 | |
Frame Width | 6.528 | |
Frame Length | 6.528 |
Product Research
Woofer
Midrange
Tweeter
Crossover
Dimensions
Woofer
Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.
Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Zamak Basket: The woofer features a cast Zamak basket. Zamak is a rigid alloy of Zinc, Aluminum, Magnesium, and Copper. Zamak is non-magnetic.
Voice Coil: The voice coil is wound around a 1" diameter low-mass Kapton former, ensuring no coil deformation.
Midrange
Polyglass Cone: Like the woofers, the midrange drivers use Polyglass cones with butyl rubber surrounds.
Zamak Basket: The midrange drivers also feature a cast Zamak basket.
Neodymium Magnets: The midrange drivers use Neodymium magnets, which have the same magnetic flux power as a ceramic magnet 10 times their size, reducing the size and weight of the speaker.
Size: The 4" midrange drivers will fit most factory 4" speaker locations. They can be top or bottom mounted and have these dimensions:
- Depth (top mount): 1.57"
- Mounting height: 0.33"
- Flange height: 0.19"
- Depth (bottom mount): 1.76"
- Tweeter protrusion: 0.14"
- Cutout diameter: 3.672"
- Frame diameter: 4.022"
Tweeter
Inverted Dome Tweeter: The tweeter is an inverted aluminum/magnesium dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.
Mounting Options: The tweeter can be surface or flush mounted using the included adapters. Focal recommends flush mounting, but the included angled cup allows surface mounting at one of two angles; approximately 10° and approximately 30°.
Crossover
Components: Focal uses audiophile grade polypropylene capacitors and solid core inductors to ensure high definition and a dynamic sound quality.
Tweeter Level: You can adjust the output level of the tweeter on the crossover to -6 dB, -3 dB, or 0 dB.
Crossover Slopes: The crossover uses 2nd order (12 dB/octave) low-pass, band-pass, and high-pass filters. The crossover points are 400 Hz and 4,000 Hz.
Wiring: The inputs and outputs are screw terminals; they will accept bare wire or spade connectors up to 0.3" wide.
Dimensions
Tweeters:
Flush Mount | Angled Surface Mount | |
---|---|---|
Mounting Height | 0.274" | 1.186" |
Depth | 0.688" (1.01" including screw) | 0.527" (screw depth) |
Frame Diameter | 2.054" | 1.842" |
Cutout Diameter | 1.828" | N/A |
Crossover:
- Width: 3.313"
- Height: 1.568"
- Depth: 5.085"
The Focal Polyglass 165 VR3 replaces these items
Focal Access 165A3
- humidity-resistant, woven glass-fiber woofer and midrange
- aluminum inverted dome tweeter
- 6-80 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...