Skip Navigation

Focal Polyglass 165 VR3

3-way 6-3/4" component speaker system

1 Review

Item #: 091165VR3

This item is no longer available.

Original Price: $899.99

Shop all Component Systems

Add to Cart

Focal Polyglass 165 VR3

Overview

Our take on the Focal Polyglass 165 VR3

Focal's 3-way Polyglass VR3 component speaker system uses precision craftmanship and advanced materials to make a strong sonic impression. The system includes two 6-3/4" woofers, two 4" midrange drivers, two tweeters, two external crossovers, and assorted hardware.

Focal's 3-way Polyglass VR3 component speaker system uses precision craftmanship and advanced materials to make a strong sonic impression. The system includes two 6-3/4" woofers, two 4" midrange drivers, two tweeters, two external crossovers, and assorted hardware.

2-layer woofer cone
The 165 VR3 system features a 6-3/4" woofer with a Polyglass cone that's created by depositing a layer of hollow glass microbeads over a layer of cellulose pulp. This unique material combines the warm sound of cellulose with the incredible strength of glass, for a cone that responds rapidly with extremely low resonance. A butyl rubber surround helps control cone movement and promotes high power handling. The zamak (zinc alloy) basket provides a non-magnetic, non-resonant housing that won't color the sound.

Unique tweeter design
Focal designed the aluminum/magnesium inverted dome tweeter to disperse high frequencies evenly for a big, open soundstage. The external 2-way crossover ensures a smooth transition from lows to highs, so vocals and instruments sound natural. You can select from 3 tweeter levels to get the right balance in your vehicle.

4" midrange speaker
The shallow-mount 4" midrange driver, identical in construction to the woofer, adds focus and detail. Mount the midrange and tweeter as close to ear level as possible in your vehicle, and enjoy the powerful soundstage created by these precision speakers.

Note: This component speaker set consists of a separate woofer, midrange speaker, and tweeter. Our Car Selector checks to make sure the woofer will fit in your factory location. You'll have to custom install the midrange and tweeter.

Note: Focal describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake we list it as a 6-3/4" speaker.

What's in the Box:

  • Two 6-3/4" Woofers
  • Two 4" Midrange
  • Two inverted dome tweeters (with attached 22" length of speaker wire)
  • 2 Tweeter flush mount cups (installed)
  • 2 Tweeter angle mount adapters
  • 2 Crossover networks
  • 2 Woofer grilles
  • 2 Woofer grille mounting rings
  • 2 Midrange grilles
  • 2 Midrange grille mounting rings
  • 2 Woofer mounting gaskets
  • 2 Midrange mounting gaskets
  • 16 Speed clips
  • 4 Machine screws (for flush mounting tweeters)
  • Eight 5/8" Self-tapping screws
  • Twenty-four 1" Self-tapping screws
  • Owner's manual (English/ French)
  • Serial number card

Product Highlights:

  • 3-way component speaker system (includes 2 woofers, 2 midrange drivers, 2 tweeters, 2 crossover networks, and hardware)
  • 6-3/4" Polyglass woofer with butyl rubber surround
  • 4" Polyglass midrange with butyl rubber surround
  • non-resonant zamak (zinc alloy) basket for woofer and midrange
  • aluminum/magnesium inverted dome tweeter
  • outboard crossover with 3-level tweeter control
  • 4-ohm total impedance
  • grilles included
  • 6-80 watts RMS power range (160 watts peak)
  • frequency response: 55-28,000 Hz
  • sensitivity: 93 dB
  • depth: 2-11/16" (woofer); 1-9/16" (midrange)
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Focal Polyglass 165 VR3 Reviews

Average Customer Review:

1 Review

Hands Down, Focals are the best!!

Written by: 2fast4thelaw from Denver, CO on September 2, 2009

These speakers are absolutely amazing. I have owned several sets of Focal speakers and that is all I will buy. They are loud and clear with detail you never knew existed! The midbass is very strong! Those little 4" mids really crank! I have these installed in my 2006 Nissan Armada. The midbass are installed in the factory location in the doors, the mids are mounted up high in the door and the tweeters are in the stock tweeter location in the dash. The imaging is incredible and they fill that huge cabin with sound. I am running 75Watts RMS from my Alpine amp and its plenty of power. I can't handle them full blast for more than a minute or two and I like my music LOUD! If your looking for 3-ways, these are it!! Just buy them and forget what they cost. They are worth every penny! Best sounding speakers I have ever owned and I have a couple of sets of the higher end Ply Kevlar K2P Focals but they are 2-ways. If you can possibly fit 3-ways, they are the way to go!

Pros:

Cons:

Details

Hands-on research

What's in the box?

Download the Focal Polyglass 165 VR3 manual

  • Two 6-3/4" Woofers
  • Two 4" Midrange
  • Two inverted dome tweeters (with attached 22" length of speaker wire)
  • 2 Tweeter flush mount cups (installed)
  • 2 Tweeter angle mount adapters
  • 2 Crossover networks
  • 2 Woofer grilles
  • 2 Woofer grille mounting rings
  • 2 Midrange grilles
  • 2 Midrange grille mounting rings
  • 2 Woofer mounting gaskets
  • 2 Midrange mounting gaskets
  • 16 Speed clips
  • 4 Machine screws (for flush mounting tweeters)
  • Eight 5/8" Self-tapping screws
  • Twenty-four 1" Self-tapping screws
  • Owner's manual (English/ French)
  • Serial number card

Features and Specs

General
Speaker Size 6 3/4
Design 3-way
Tweeter Design 1-3/4" Inverted Dome
Tweeter Composition Aluminum/Magnesium
Woofer Composition Polyglass-coated Cellulos
Woofer Surround Butyl Rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity 93 dB
Frequency Response 55 - 28k Hz
RMS Power Range (Watts) 6-80
Peak Power Handling (Watts) 160
Impedance (Ohms) 4
Top-mount Depth (Inches) 2 11/16
Bottom-mount Depth (Inches) 2 7/8
Cutout Diameter or Length (inches) 5 9/16

Product Research

Woofer
Midrange
Tweeter
Crossover
Dimensions

Woofer

Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.

Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.

Zamak Basket: The woofer features a cast Zamak basket. Zamak is a rigid alloy of Zinc, Aluminum, Magnesium, and Copper. Zamak is non-magnetic.

Voice Coil: The voice coil is wound around a 1" diameter low-mass Kapton former, ensuring no coil deformation.

Midrange

Polyglass Cone: Like the woofers, the midrange drivers use Polyglass cones with butyl rubber surrounds.

Zamak Basket: The midrange drivers also feature a cast Zamak basket.

Neodymium Magnets: The midrange drivers use Neodymium magnets, which have the same magnetic flux power as a ceramic magnet 10 times their size, reducing the size and weight of the speaker.

Size: The 4" midrange drivers will fit most factory 4" speaker locations. They can be top or bottom mounted and have these dimensions:

  • Depth (top mount): 1.57"
  • Mounting height: 0.33"
  • Flange height: 0.19"
  • Depth (bottom mount): 1.76"
  • Tweeter protrusion: 0.14"
  • Cutout diameter: 3.672"
  • Frame diameter: 4.022"

Tweeter

Inverted Dome Tweeter: The tweeter is an inverted aluminum/magnesium dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.

Mounting Options: The tweeter can be surface or flush mounted using the included adapters. Focal recommends flush mounting, but the included angled cup allows surface mounting at one of two angles; approximately 10° and approximately 30°.

Crossover

Components: Focal uses audiophile grade polypropylene capacitors and solid core inductors to ensure high definition and a dynamic sound quality.

Tweeter Level: You can adjust the output level of the tweeter on the crossover to -6 dB, -3 dB, or 0 dB.

Crossover Slopes: The crossover uses 2nd order (12 dB/octave) low-pass, band-pass, and high-pass filters. The crossover points are 400 Hz and 4,000 Hz.

Wiring: The inputs and outputs are screw terminals; they will accept bare wire or spade connectors up to 0.3" wide.

Dimensions

Tweeters:

  Flush Mount Angled Surface Mount
Mounting Height 0.274" 1.186"
Depth 0.688" (1.01" including screw) 0.527" (screw depth)
Frame Diameter 2.054" 1.842"
Cutout Diameter 1.828" N/A

Crossover:

  • Width: 3.313"
  • Height: 1.568"
  • Depth: 5.085"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Staff Reviews

Product reviews from the Crutchfield Labs

What are the Labs?
Library