About the Focal Polyglass 27 V1
Focal's Polyglass subs pump out righteous low end that brings out the power in your music. Focal crafts these subs with tremendous care to ensure flawless output and long life.
The Polyglass 27 V1 11" subwoofer can take up to 250 watts RMS, and it's designed for use in a ported enclosure. Its advanced Polyglass cone bonds a layer of hollow glass microbeads over a layer of cellulose to create an incredibly strong, responsive speaker. The large butyl rubber surround keeps the cone moving smoothly, while the engraved aluminum dust cap provides protection with a classic look.
Focal anchors this sub with a rigid, non-magnetic zinc alloy basket that won't color your bass. Advanced cooling around the voice coil keeps this sub running cool when your music heats up. Focal's pursuit of excellence makes this Polyglass subwoofer a great pick for low-frequency reinforcement in your vehicle.
Priced per speaker
Product highlights:
- 11" 4-ohm subwoofer
- Polyglass cone with butyl rubber surround
- zamak (zinc alloy) basket
- power range: 50-250 watts RMS
- peak power handling: 500 watts
- frequency response: 34-500 Hz
- sensitivity: 85.8 dB
- top-mount depth: 5-1/8"
- ported box volume: 0.53-1.06 cubic feet
- warranty: 1 year
- MFR # 27V1
What's in the box:
Focal Polyglass 27 V1 owner's manual
- 11" SVC 4-ohm woofer (rubber magnet boot installed)
- 6 Hex-head mounting screws
- Self-adhesive foam gasket
- User Manual (Eng/Fre)
- Serial number card
- FOCAL logo sticker
- "Remove Before Using" notes (attached to speaker terminals of woofer)
Customer reviews for Focal Polyglass 27 V1
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal Polyglass 27 V1
Features & specs
Features and Specs | ||
---|---|---|
Size | 11 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Polyglass | |
Surround Material | Butyl rubber | |
Port diameter (inches) | 2.75 | |
Port length (inches) | 9.8125 | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
90 dB at 2.83 volts 85.8 dB at 1 watt | |
Frequency Response | 34 - 500 Hz | |
Max RMS Power Handling | 250 | |
Peak Power Handling (Watts) | 500 | |
Top Mount Depth (inches) | 5 1/8 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 9 3/16 | |
Frame Width | 10.655 | |
Frame Length | 10.655 | |
Vas (liters) | 21.43 | |
Fs (Hz) | 39.09 | |
Qts | 0.445 | |
Xmax (millimeters) | 6 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | N/A | |
Minimum Sealed Box Volume (cubic feet) | N/A | |
Maximum Sealed Box Volume (cubic feet) | N/A | |
Ideal Ported Box Volume (cubic feet) | 0.71 | |
Minimum Ported Box Volume (cubic feet) | 0.53 | |
Maximum Ported Box Volume (cubic feet) | 1.06 |
Product Research
Features
Enclosure Compatibility
Features
Polyglass Cone: The FOCAL Polyglass 27V1 features an 11" polyglass cone woofer for a wide, dynamic frequency response of 35-500Hz that offers great bass and mid-bass sound. The uniform deposit of hollow-glass microballs over the entire cellulose pulp cone greatly increases its rigidity without adding significant weight, so you get a woofer that is durable, yet efficient, and sounds great.
Aluminum Dust-Cap: The Polyglass 27V1 features an aluminum dust-cap with an engraved FOCAL logo for a more esthetic look.
NBR Surround: The FOCAL Polyglass 27V1 features a NBR (Nitrile Butyl Rubber) surround for long excursion, deep bass, and added durability to promote long life.
Aluminum Voice-Coil Former: The Polyglass 27V1 woofer features a 4 layer, 2.0" diameter, 4-ohm, aluminum voice-coil former for higher power handling capabilities up to 250 watt (RMS) and 500 watt (Peak).
Louvered Cooling System: The Polyglass 27V1's Louvered Cooling System is self-regulated ventilation system which increases air cooling, prevents heat build-up, and provides optimized reliability with performance consistency.
Ferrite Magnet: The Polyglass 27V1 woofer features a120mm (4.75"), 25mm (1") thick ferrite magnet for higher sensitivity up to 90dB (2.83V/1m).
Die Cast Chassis: The FOCAL Polyglass 27V1 features a die-cast Zamak chassis which is a rigid, non-magnetic, and non-resonant frame that provides a strong, reliable structure for the woofer.
Spring-Posts: The FOCAL 11" woofer is equipped with a pair of nickel-plated spring-post speaker terminals for easy connection up to 10AWG wire.
Foam Gasket: The Polyglass 27V1 comes supplied with a self-adhesive foam gasket mounting-ring for better chassis damping and to prevent air leakage.
Rubber Magnet Boot: The Polyglass 27V1 features a rubber magnet boot to protect the woofer's magnet from shocks and corrosion. The rubber boot is removable.
Enclosure Compatibility
Recommended Ported Box Volume: The FOCAL Polyglass 27V1 is designed to be installed in a ported box with a volume between 0.53 cu/ft to 1.06 cu/ft. FOCAL recommends a vented enclosure made out of 3/4" MDF with an internal volume of 0.71 cu/ft.
Vented Enclosure Specifications (using 3/4" MDF construction) | |||
---|---|---|---|
Internal Volume | 0.53 cu/ft. | 0.71 cu/ft. | 1.06 cu/ft. |
Dimensions | Width: 14.1875" Height: 11.0" Depth1: 11.0" Depth2: 7.0625" | Width: 16.125" Height: 11.75" Depth1: 11.75" Depth2: 7.0625" | Width: 14.9375" Height: 14.5625" Depth1: 14.5625" Depth2: 9.3125" |
Port | 2.75" diameter x 9.8125" long | 2.75" diameter x 9.8125" long | 2.75" diameter x 9.8125" long |
Bass Type | Fast and tight bass | Punch and dynamic bass | Deep and articulate bass |
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...