About the Focal Integration IC 570
Engineered for excellence
Engineered for excellence
Focal applies the same technology they use in their studio and audiophile-grade home systems to their Integration line of car speakers. Integration IC 570 5"x7" speaker cones are made of Polyglass, a material that combines the warm sound of cellulose with the strength of glass, for a woofer that plays accurately with no added resonances.
Adjustable tweeter
The Integration processed aluminum inverted dome tweeter features a built-in phase plug and wave guide, which act together to increase the power of high-frequency notes and improve the stereo soundstage. You can also tilt the tweeter for better imaging in many vehicles. Integration speakers allow you to put Focal sound quality and construction into your vehicle without a lot of muss and fuss, so you can enjoy a dramatic jump in performance over your old speakers.
Priced per pair
Product highlights:
- 2-way 5"x7" speakers (pair)
- Polyglass woofer with butyl rubber surround
- processed aluminum inverted dome tweeter
- 4-ohm impedance
- 5-60 watts RMS power range (120 watts peak)
- frequency response: 65-20,000 Hz
- sensitivity: 94.1 dB
- depth: 2-3/8"
- grilles are not included factory grilles are appropriate for most installations
- warranty: 1 year
- MFR # IC570
What's in the box:
Focal Integration IC 570 owner's manual
- Two 2-way speakers
- 2 Mounting gaskets
- 8 Speed clips
- Eight 1" Self-tapping screws
- Owner's manual (English/ French)
- Focal window sticker
Customer reviews for Focal Integration IC 570
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal Integration IC 570
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | Inverted Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Aluminum | |
Woofer Composition | Polyglass | |
Woofer Surround | Butyl Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 94.1 | |
Frequency Response | 65 - 20k Hz | |
Minimum RMS Wattage | 5 | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 120 | |
Top-mount Depth (Inches) | 2 3/8 | |
Bottom-mount Depth (Inches) | 2 11/16 | |
Cutout Diameter or Length (inches) | 0 | |
Mounting Height (Inches) | 0.642 | |
Frame Width | 5.47 | |
Frame Length | 7.68 |
Product Research
Features
Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.
Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Voice Coil: The voice coil is wound around a 1" diameter low-mass Kapton former, ensuring no coil deformation.
Inverted Dome Tweeter: The tweeter is an inverted aluminum dome, producing a broad sound stage. The tweeter rotates on its post, so it can be pointed toward the listener.
The Focal Integration IC 570 replaces these items
Focal Access 570CA1
- humidity-resistant, woven glass-fiber woofer
- aluminum inverted dome tweeter
- 2-60 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Focal is and always will be the best speaker money can buy. They're one of the few that are made in the US, making quality superior. For me, it came down to JL and Focal, I've had alpine's and blown them in months. I went with the Focal's backed with Dynamat and got the performance my truck needed.
Mike from Houston, TX