About the Focal Integration IS 130
Focal applies the same technology they use in their studio and audiophile-grade home systems to their Integration line of car speakers. The Integration IS 130 component system features 5-1/4" woofer cones made from Polyglass, a material that combines the warm sound of cellulose with the strength of glass, for a woofer that plays accurately with no added resonances.
Adjustable tweeter
The separate Integration processed aluminum inverted dome tweeter features a built-in phase plug and wave guide, which act together to increase the power of high-frequency notes and improve the stereo soundstage. You can also tilt the tweeter for better imaging in many vehicles.
Built-in crossover networks
The crossover networks are built-in, so you don't have those extra boxes to install. Integration speakers allow you to put Focal sound quality and construction into your vehicle, so you can enjoy a dramatic jump in performance over your old speakers.
Product highlights:
- component speaker system includes two 5-1/4" woofers, 2 tweeters, and 2 woofer grilles
- Polyglass woofer with butyl rubber surround
- processed aluminum inverted dome tweeter
- built-in crossovers
- 4-ohm impedance
- 5-60 watts RMS power range (120 watts peak)
- frequency response: 75-20,000 Hz
- sensitivity: 91.9 dB
- woofer top-mount depth: 1-15/16"
- warranty: 1 year
- MFR # IS130
What's in the box:
Focal Integration IS 130 owner's manual
- Two 5-1/4" Woofers
- Two inverted dome tweeters (with 18" length of speaker wire attached)
- 2 Surface mount tweeter housings (installed)
- 2 Angled surface mount tweeter housings
- 2 Woofer grilles
- 2 Grille mounting rings
- 2 Foam woofer gaskets
- 8 Speed clips
- Four 7/8" Flathead screws
- Eight 1" Self-tapping screws
- Owner's manual (English/ French)
- Focal window sticker
Customer reviews for Focal Integration IS 130
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal Integration IS 130
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | Inverted Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Aluminum | |
Woofer Composition | Polyglass | |
Woofer Surround | Butyl Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 91.9 | |
Frequency Response | 75 - 20k Hz | |
Minimum RMS Wattage | 5 | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 120 | |
Top-mount Depth (Inches) | 1 15/16 | |
Bottom-mount Depth (Inches) | 2 3/16 | |
Cutout Diameter or Length (inches) | 4 1/2 | |
Mounting Height (Inches) | 0.329 | |
Frame Width | 5.069 | |
Frame Length | 5.069 |
Product Research
Woofer
Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.
Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Phase Plug: The bullet-shaped phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the high frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.
Tweeter
Inverted Dome Tweeter: The tweeter is an inverted aluminum dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.
Mounting Options: The tweeters can be surface mounted and include two types of surface mount housings, one low profile and one angled:
Flush Mount | Low Profile Surface Mount | Angled Surface Mount | |
---|---|---|---|
Mounting Height | 0.292" | 0.908" | 1.935" |
Mounting Depth | 0.511" | 0.885" (screw depth) | 0.8" (screw depth) |
Frame Diameter | 1.886" | N/A | N/A |
Cutout Diameter | 1.677" | N/A | N/A |
Width | N/A | 1.887" | 1.892" |
Surface Depth | N/A | 1.887" | 2.865" |
Crossover
Crossovers: Each woofer and each tweeter has an integrated 6 dB/octave crossover. Because the woofer and tweeter crossovers are separate, the system can be bi-amped.
Note: No crossover point frequency specifications are provided.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
I bought these thinking that they were entry level and I would just be "satisfied" with these....Boy was I wrong! The sound quality was way better than I expected, this was a great purchase
Kenlan21 from San Antonio, tx